My ISP router couldn't identify my ASA box and I believe it due to ARP disable in the interface. Have any idea how to enable the arp discovery on the interface ??
MY QUESTION: How can I make the Cisco firewall advertise the newly added 10.17.0.0/24 -> 192.168.1.250 route to the Windows boxes so I don't have to add them in manually each time? There must ...
I have already spent a day on configuring the remote VPN access to my ASA box but couldn't work. Have any idea of this ??
Some questions :
1. The remote access is generated from ADSM. I se...
hello I am in teh process of setting up a new cisco asa firewall for a client taht has a existing pix I printed the running and starup config and reading it as a refrecnce to setup teh new asa...
running SBS 2003 utilizing pix 506e firewall. i can access the remote web workplace and login, i see the computers
listed but when i actually try to logon to any of the computers- it gives me...
How I can stop messengers (msn & Yahoo) from Cisco PIX 515e?
I don't have ISA server so I only have Csico PIX 515e so i'm asking if there is any possible to stop those chating from my pix ...
HI,
When i try to put access policies on ASA model 5520 using ASDm 6.0 and Software version on ASA is 8.0, It requires a separate policy defined for each protocol type traffic.
For example ...
I have a Cisco PIX 501 router that defines a static IP address. The ISP has chosen to change this address. I have edited the run file to reflect the new numbers. How do I remove a line from...
How do I make external connections from an inside IP appear as a different external IP than the firewall.
My Exchange server external IP is different than the Firewall external IP, but on t...
Hi All,
I have setup my pix 520 using vpdn to do the pppoe connection to my ISP. I have a static nat setup to a host inside my network (192.168.1.50). This host can access the internet fine...
I tried adding bookmarks so that users can have it preloaded on the main page, however nothing displays. Please see attachements, any idea what I could be doing wrong. Please help
I have a cisco asa 5505 which I have just configured for vpn access. I can connect with a client but can not browse the internet while tunnel is active. Also another problem I have is I am abl...
I am not a big fan of many changes all at once but we did a few major changes and I now how a problem. I enabled OMA and installed an SSL certificate. I had to enter the following command in...
Hello, I hope the experts here can help me to troubleshoot a site to site VPN connectivity issue.
Our users require an Pix 501 & IP Phone at home and I am trying to get a site to site vpn con...
Hi Guys.
Why does this configuration not support dhcp?
Using 3114 out of 131072 bytes
!
version 12.4
no service pad
service timestamps debug uptime
service timestamps log uptime
se...
How do I configure a Cisco ASA5510 to ensure it returns only the username and password prompts (giving direct access into priv exec mode) and not the user exec prompt, when accessing the 5510 ...
Hello All,
I need help setting port forwarding on my 506e firewall. Currently smtp, pop3, http, https are all pointing to exchange with external address XX.XX.XXX.154. I tried doing it in t...
I have had changes in my network where I had to retask my PIX 506E to another building. I am replacing it with a ASA 5505. I have just ordered it so, I don't know the software version, yet, ...
I have a visitor that wants to access her home office VPN via her VPN client. My Cisco ASA5510 firewall seems to be blocking it. How can I give her access through my firewall?
Thanks in ad...
We got this Cisco so that we could setup a VPN. The VPN works properly and now we need to set it as the only gateway. We need to allow SMTP, PPTP, etc. except that I was just trying to allow...
I have a PIX 501 connecting to private networks.
I'd like to be able to telnet and/or access PDM from our main branch.
Currently, neither work.
(BTW - This is my first attempt at configu...
HI Team,
I am not sude wether this relates to firewall but one of server on our inside network keeps dropping connection. all teh rest of the serevrs work Ok, no connection dropps,
when th...
Hello, can anyone point me in the right direction to see firewall logging so that we can monitor what the Cisco is currently blocking. From SDM Under Logging, The Firewall Log is empty and sho...
Hello, i have a VPN L2L between a cisco asa 5520 and a 1841 router.
Although everything works fine, when a specific client witch is a printer tries to initialize with the central print ser...
I would like to force my PIX firewall 515 running 8.03 to show as a "hop" in a traceroute command. Can anyone help me with this, or point me in the right direction?
