hello I am in teh process of setting up a new cisco asa firewall for a client taht has a existing pix I printed the running and starup config and reading it as a refrecnce to setup teh new asa...
running SBS 2003 utilizing pix 506e firewall. i can access the remote web workplace and login, i see the computers
listed but when i actually try to logon to any of the computers- it gives me...
How I can stop messengers (msn & Yahoo) from Cisco PIX 515e?
I don't have ISA server so I only have Csico PIX 515e so i'm asking if there is any possible to stop those chating from my pix ...
HI,
When i try to put access policies on ASA model 5520 using ASDm 6.0 and Software version on ASA is 8.0, It requires a separate policy defined for each protocol type traffic.
For example ...
I have a Cisco PIX 501 router that defines a static IP address. The ISP has chosen to change this address. I have edited the run file to reflect the new numbers. How do I remove a line from...
How do I make external connections from an inside IP appear as a different external IP than the firewall.
My Exchange server external IP is different than the Firewall external IP, but on t...
Hi All,
I have setup my pix 520 using vpdn to do the pppoe connection to my ISP. I have a static nat setup to a host inside my network (192.168.1.50). This host can access the internet fine...
I tried adding bookmarks so that users can have it preloaded on the main page, however nothing displays. Please see attachements, any idea what I could be doing wrong. Please help
I have seen a lot of people post actual log messages/error messages from their firewalls to aid in troubleshooting. How do I enable that to be able to do it?
I have a PIX 6.3(3) that I need...
I have a cisco asa 5505 which I have just configured for vpn access. I can connect with a client but can not browse the internet while tunnel is active. Also another problem I have is I am abl...
I am not a big fan of many changes all at once but we did a few major changes and I now how a problem. I enabled OMA and installed an SSL certificate. I had to enter the following command in...
Hi all,
I am currently stumped, here is what I have:
2 Pix 515 UR in Failover mode running Version 7.2.(3)
I have 6 interfaces of which 2 are relevant for this problem- Inside (security=1...
Hello, I hope the experts here can help me to troubleshoot a site to site VPN connectivity issue.
Our users require an Pix 501 & IP Phone at home and I am trying to get a site to site vpn con...
Hi Guys.
Why does this configuration not support dhcp?
Using 3114 out of 131072 bytes
!
version 12.4
no service pad
service timestamps debug uptime
service timestamps log uptime
se...
I have a new Cisco ASA to install. I just want to basically get it working.
I have the outside interface connected directly to service provider router on external IP address. I have a PC ...
How do I configure a Cisco ASA5510 to ensure it returns only the username and password prompts (giving direct access into priv exec mode) and not the user exec prompt, when accessing the 5510 ...
We currently have 1 static public IP in our current config (attached). I have just acquired a new block of 5 IP addresses and I tried switching this over yesterday but I had problems. My new...
Hi
I am new to Cisco ASA. We just purchased a new one. I am little familiar with Pix and the whole switching on ASA got me little confused. I need to replace our existing Internet Pix wit...
Hi I'm trying to get a PIX506 to route incoming traffic (Citrix) to a host (172.31.1.14), people cant connect to citrix remotely however outgoing traffic is fine - browsing, connecting to host...
Im having trouble accessing a Web Server (via the internet) i have set up inside our network.
It sits behind a PIX 501
IP info is: (the public IP's i have masked)
PIX outside: 10.10.1...
I have a Cisco ASA 5510 with the appropriate licenses. I want to utilize the content filtering I purchased. I noticed it is via Trend. That is fine and when I visit the administration throu...
I have a PIX version 5.3 that is using conduit statements. Yeah, I know I shouldn't use conduits. What I need to know is the difference between these two statements aside from the abvious.
...
Can anyone please tell me how to read this Pix 501 Configuration??
My customer has forgoted the user name and password for this device. I have this last saved page from it, but can not figu...
HI Experts,
need to have my FTP up and running again so I have a Cisco PIX 506E
Ftp is there I just need to point the routing there IP is XX.XX.8.69 I'm double checking my config
config ...
Quick Question:
I have set up a Radius VPN using a 506e PIX and IAS. Right now I use the cisco client to connect. Is it possible to connect using just the built in VPN in windows XP?
...
