OBJECTIVE: Create a clean VPN Connection to the ASA 5520 on the Remote Site using the Cisco VPN Client from laptops located behind the ASA 5505 Version 7.2(2) in the Local Site.
PROBLEM:
...
Hi Experts,
I have a Cisco PIX 515E at our main site and we are using an ASA 5505 at our telecommuters site. I have set it so that VPN works fine and our user can access internal network, f...
Hello,
I have a Pix Firewall With 2 Users that I need to change the Password then remove 2 users too. I am somewhat Familiar with routers but have never done this on a PIX..
username <us...
Hello. I am a newbie to EE and a novice to Cisco products so please bear with me. I'm trying to set up a VPN so that people within my workplace can access our fileserver remotely using a Cis...
Hi,
After installing the Cisco AnyConnect VPN client I am now having problems using the normal Cisco VPN Client.
The Cisco VPN Client will connect fine but I am unable to send/receive an...
Hello,
I need to install the PDM for a cisco pix 515e. I just inherited this client and need to get up to speed. I am more comfortable with the gui though I can do the command line interfac...
Heyy together,
i have a small setup problem, as well im not a god in config an ASA.
Short overview:
External
ASA´s std. Outside interface: X.X.1.10
Mailserver "outside interface" shou...
HI,
I have a lot of Torrent users in the company and we need to block off torrents sites.
We don't yet have a great firewall in place that can deal with this but we do have an ASA 5505.
I...
I am trying to setup Active/Standby failover on two ASA 5520's. Originally i was connecting the two via a crossover cable, now im going through a switch. For some reason i can not get the two ...
We have a webserver on the inside interface of an ASA 5505 (Base license). I've forwrded ports 80 and 443 to the webserver but to anyone trying to browse our websites the sites are really slow...
I have configured the 5505 using the VPN Wizard and successfully connected the remote vpn client. I can ping the PC in the office from the remote PC but I can not connect to the shared folder...
Is it possible to connect a cisco switch (2900/2950) to a PIX 501 Outside Interface 0?????? If so, how do you configure such a connection? Can you connect to any one of four inside ports (1...
Hello Everyone,
I have been having a heck of a time getting my VPN to work with my new Cisco ASA 5505. I upgraded the firmware to 8.0(3) and it seems to be working just fine otherwise. Plea...
How to block ICMP from outside? this is my working running config for the Cisco PIX 501. (I tried to deny icmp any any echo-reply, but still doesn't work).
access-list atb_splitTunnelAcl pe...
Hi all,
I have a CISCO pix 501 setup at the office to provide firewall and VPN. Internet connection is working fine from Office- > Pix -> Internet.
I have been through the VPN wizard to ...
Hello,
I am setting up a new vpn client. I would like this client to have it's internet web page requests go through the vpn connection. This is the WastWaterTreamentPlant tunnel group show...
Hello,
After a few recent changes on the firewall, one of our Site-to-Site VPN connections is experiencing one-way traffic. The VPN connection actually connects two IP addresses on our side ...
We are using this ASA for remote access VPNs.
The majority of these are coming in from squad cars using cell modems to connect to the Internet.
The problem we are having is if the user goe...
Hi guys
I am having problem installing cisco vpn client 5.0.02.0090 and am getting the following error message: Error 1722. There is a problem with this Windows Installer package. i would ...
Experts!
We need to upgrade our ASAs. Do we need to upgrade the software on our failover in addition to our primary ASA? Or does the primary upgrade the failover automatically when it is up...
I currently have an ASA 5510
Connections are Internet, DMZ, Tenet, Virtuals
The DHCP Server sits in the Tenet routing network on the layer 3 switches. Have many virtual networks for the c...
I have been using Cisco's ASDM GUI tool to define VPN tunnels and group policies for remote access and lan-to-lan tunnels on a Cisco Pix 515E firewall running version 7.2(1)19 security softwar...
How do I Troubleshoot/Repair Slow HTTPS connection CISCO PIX 501 Firewall?
here is my config, with public IP *** for security
Building configuration...
: Saved
:
PIX Version 6.3(5)
i...
I have probelm access my ASA 5510 through ssh. Using ssh with putty, it pop up a message at once "Server unexpectedly closed network connection. The ssh has been allowed for any IP access from...
Hello!
I'm having a tough time getting a VPN tunnel to work between a cisco 851 router and an ASA 5510. The asa is at the main office. I began by trying to get the 851 vpn to work from my h...
