Advertisement

01.20.2008 at 11:05AM PST, ID: 23096885
[x]
Attachment Details
[x]
The Solution Rating System

With so many solutions, how can you tell which solutions are most likely to help you and which ones are not? To provide you with a tool to use, we rate our solutions based on various elements that most accurately determine if a solution is a quality solution. To explain what factors affect the solution rating, here are the elements we take into consideration when formulating our solution rating.

  • The Grade of the Solution
  • The Zone Rank of the Expert Providing the Solution
  • The Number of Author and Expert Comments
  • The Number of Experts Contributing
  • The Feedback of the Community

Your Input Matters
Because of the way the system is set up, the most important variable in this equation is you. As a member of Experts Exchange, you are able to cast your vote on the quality of the solutions in regard to how complete, accurate, helpful and easy to understand each solution is. When you provide your feedback, each rating is adjusted accordingly. So, if you see a solution that has a poor rating that you think is a good solution, let us know by rating it. As you do, the rating will be adjusted and will become more accurate for other members of our site.

If you have any suggestions that you would like to make for our rating system, please ask a question in the Suggestions Zone of Community Support.

Thank you!
9.6

ASA 5510 Configuration Issues

Asked by chingmd in Enterprise Firewalls, Network Routers, Miscellaneous Security

Tags: , , , , ,

HIya,

I'm having a heck of a time making this asa config work.  I've tried multiple things.   What I want to end up with is the following:

Some of the details:  
General internet access from private lan (can't even get that to work)
NAT access on a public IP range
Port forward access to smtp, imap, ssh, etc.
VPN configure (haven't even tried)

network Ranges:    
public ip for router interface
public IP range for DMZ
internal lan

I have been working on this config from home.  Where I'm on  cable modem with a nat'ing router.  (standard stuff, a 192.168.1.1 network)   I've been unable to get from the internal lan (10.47.4.0/22) to the  to the home router (192.168.1.1)

Can you spot what I'm doing wrong.   I'll give the points to a working internet config, with nat,  port access from outide to inside (one or two should be enough) and a a static outgoing (think smtp).

The vpn would be nice, but not a requirement at this stage.
Start Free Trial 
1:
2:
3:
4:
5:
6:
7:
8:
9:
10:
11:
12:
13:
14:
15:
16:
17:
18:
19:
20:
21:
22:
23:
24:
25:
26:
27:
28:
29:
30:
31:
32:
33:
34:
35:
36:
37:
38:
39:
40:
41:
42:
43:
44:
45:
46:
47:
48:
49:
50:
51:
52:
53:
54:
55:
56:
57:
58:
59:
60:
61:
62:
63:
64:
65:
66:
67:
68:
69:
70:
71:
72:
73:
74:
75:
76:
77:
78:
79:
80:
81:
82:
83:
84:
85:
86:
87:
88:
89:
90:
91:
92:
93:
94:
95:
96:
97:
98:
99:
100:
101:
102:
103:
104:
105:
106:
107:

: Saved
:
ASA Version 8.0(3) 
!
hostname asa5510
domain-name domain.local
enable password ******** encrypted
names
dns-guard
!
interface Ethernet0/0
 nameif outside
 security-level 0
 ip address 192.168.1.99 255.255.255.0 
!
interface Ethernet0/1
 nameif inside
 security-level 100
 ip address 10.47.4.1 255.255.252.0 
!
interface Ethernet0/2
 shutdown
 no nameif
 no security-level
 no ip address
!
interface Ethernet0/3
 shutdown
 no nameif
 no security-level
 no ip address
!
interface Management0/0
 nameif management
 security-level 100
 ip address 192.168.0.1 255.255.255.0 
 management-only
!
passwd ********** encrypted
boot system disk0:/asa803-k8.bin
ftp mode passive
pager lines 24
logging enable
logging asdm informational
mtu outside 1500
mtu inside 1500
mtu management 1500
no failover
icmp unreachable rate-limit 1 burst-size 1
asdm image disk0:/asdm-603.bin
no asdm history enable
arp timeout 14400
global (outside) 101 interface
nat (inside) 101 10.47.4.0 255.255.252.0
route outside 0.0.0.0 0.0.0.0 192.168.1.1 1
timeout xlate 3:00:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout uauth 0:05:00 absolute
dynamic-access-policy-record DfltAccessPolicy
http server enable
http 10.47.4.0 255.255.252.0 inside
http 192.168.0.0 255.255.255.0 management
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart
telnet timeout 5
ssh timeout 5
console timeout 0
!this is for home testing so i didn't have to set a manual ip
dhcpd address 10.47.4.30-10.47.4.32 inside
dhcpd dns 192.168.1.1 interface inside
dhcpd enable inside
!
dhcpd address 192.168.0.2-192.168.0.254 management
dhcpd enable management
!
threat-detection basic-threat
threat-detection statistics
!
class-map inspection_default
 match default-inspection-traffic
!
!
policy-map global_policy
 class inspection_default
  inspect ftp 
  inspect h323 h225 
  inspect h323 ras 
  inspect rsh 
  inspect rtsp 
  inspect esmtp 
  inspect sqlnet 
  inspect skinny  
  inspect sunrpc 
  inspect xdmcp 
  inspect sip  
  inspect netbios 
  inspect tftp 
!
service-policy global_policy global
prompt hostname context 
Cryptochecksum:8cf2417ec53b6e4d0343a89e97442c3c
: end
asdm image disk0:/asdm-603.bin
no asdm history enabl
[+][-]01.20.2008 at 12:18PM PST, ID: 20702269

At Experts Exchange, members can ask their questions to thousands of technology professionals, also known as Experts. Experts compete and collaborate to answer those questions by leaving comments like this one.

Start your 7-day free trial to view this Expert Comment or ask the Experts your question.

 
[+][-]01.20.2008 at 01:35PM PST, ID: 20702522

Often, when Experts are collaborating with members who have asked questions, they will request additional information about the problem. Askers respond with an author comment like this one.

Start your 7-day free trial to view this Author Comment or ask the Experts your question.

 
[+][-]01.20.2008 at 01:45PM PST, ID: 20702572

At Experts Exchange, members can ask their questions to thousands of technology professionals, also known as Experts. Experts compete and collaborate to answer those questions by leaving comments like this one.

Start your 7-day free trial to view this Expert Comment or ask the Experts your question.

 
[+][-]01.20.2008 at 02:35PM PST, ID: 20702746

Often, when Experts are collaborating with members who have asked questions, they will request additional information about the problem. Askers respond with an author comment like this one.

Start your 7-day free trial to view this Author Comment or ask the Experts your question.

 
[+][-]01.20.2008 at 02:43PM PST, ID: 20702769

View this solution now by starting your 7-day free trial. Setting up your free trial is quick, easy, and secure. We will return you to this solution, unlocked, when you're done.

 

About this solution

Zones: Enterprise Firewalls, Network Routers, Miscellaneous Security
Tags: cisco, asa, 5510, cisco, asa, 5510
Sign Up Now!
Solution Provided By: batry_boy
Participating Experts: 2
Solution Grade: A
 
 
[+][-]01.21.2008 at 09:24AM PST, ID: 20707728

Often, when Experts are collaborating with members who have asked questions, they will request additional information about the problem. Askers respond with an author comment like this one.

Start your 7-day free trial to view this Author Comment or ask the Experts your question.

 
 
Loading Advertisement...
20080716-EE-VQP-32 / EE_QW_2_20070628