dissolved
asked on
Setting up RAS
Can someone give me instructions on doing this on an ASA5505. I have done this on a pix506e, never an ASA.
I have the vpn pool defined. I also have a Radius server which will be used, but I'm not sure how to include it
I have the vpn pool defined. I also have a Radius server which will be used, but I'm not sure how to include it
ASKER
thanks, are the rest of the commands pretty similar to the pix for setting up the rest?
ASKER CERTIFIED SOLUTION
membership
This solution is only available to members.
To access this solution, you must be a member of Experts Exchange.
First define your RADIUS server:
aaa-server RADIUS protocol radius
aaa-server RADIUS (inside) host 10.1.1.10
key <radiuskey>
Then instruct the tunnel-group to use RADIUS for authentication.
tunnel-group "remotevpn" type remote-access
tunnel-group "remotevpn" general-attributes
authentication-server-grou