We are using a WatchGuard Firebox x550e for a firewall. We are curious if there is a way to block Internet access (for internal users) based on their IP address. We assign each computer an I...
Hi All,
I look after a Cisco 837 router for one of my clients. It works perfectly, except recently i have been asked to set up a vpn to another office.
The other office is running a W...
I have successfully been able to get a VPN working using the MUVPN client with IPSec. Now there is a new problem, our graphics people use Mac and our developers use Linux. Watchguard's IPsec...
Hello,
I am trying to configure a VPN tunnel between 2 sites using a Watchguard x55e at one site and a Zytel Zywall 35 on the other.
When I try to establish this connection I continually...
I am configuring the Firebox Edge and have turned on PPTP service. I have configured my XP workstation to connect to the firewall using PPTP. I connect, authorization occurs, and the connectio...
We have recently deployed watchguard firewalls through out our network. They seem to work great, but I have ran into various weird issues. The issue I am having today is that no one in our n...
Hello we have 300+ users and a Watchguard Firebox X Core 1000 firewall. Since we blocked other im softwares, users have begun to use Skype. I cannot block Skype in port level because it uses p...
HELLO
I'm new to these devices and I've spent MORE THAN a few hours trying to setup a "back to back" vpn connection with these two watchguard devices and would really appreciate some help. ...
I was configuring WebBlocker for my firebox to block certain content. During the configuration it creatted and HTTP proxie policy automatically, cool. I then apply the changes and save the co...
I think my VPN might be timing out in a strange manner. The MUVPN remains connected but after some time, I am unable to access anything on the network unless I reconnect the VPN. Once I reco...
I am trying to setup Remote Desktop Web Connection on Windows XP. It is working internally but I am trying to publish the connection to the internet so I can connect from outside my company's ...
I am trying to create an IPSec tunnel between a Firebox X550E using the new Fireware interface to a SOHO|tc (not a 5 or 6). I have found many documents online discussing the connections to a ...
We are trying to port forwarding on soho 6 box. Our vendor says "Please forward Ports 80 and 4000 to the internal IP address, I dont see any option on soho 6 control panel for this
Hi - I have recently replaced an old router with a watchguard x10e and now we can not use logmein.com. Behind the network there is a sbs 2003 server running exchange and is using 443 for http...
Hi. I have a watchguard firebox x750e firewall running System manager v.10.0.2 and policy manager v.10. One of my users is trying to gain access to [http://74.52.122.18/cpanel] and keeps ge...
how do i create a dmz on watch guard firewall
I have been working on creating a IPSec VPN tunnel between my office (firebox X550E) and my home (SOHO 5). If I set the Phase 1 settings in my office to Agressive, the connection is forced an...
I am having a little trouble customizing PPTP. I want some PPTP users to have access to a certain network and not another. However, I only can seem to VPN in if I have users in the "PPTP-Use...
I get this error when I go to a Sharepoint site through a watchguard http proxy.
Response denied by WatchGuard HTTP proxy.
Reason: header 'Content-Type' denied rule='Default' value='(none...
Hello,
I have a watchguard firebox lll. I am having a problem with outgoing email. Some domains (maybe 2%) do a reverse lookup on the our domain and it does not resolve correctly for them a...
I have a similar question to a previously posted issue:
I have a watchguard firebox lll. I am having a problem with outgoing email to only a few domains like AOL. I think the issue is with...
I am setting up a new WatchGuard Firebox x550e. I've done the initial set up and have added the device to our network. We're able to browse the Internet fine, and now I would like to add a P...
I have a watchguard firebox edge x20 firewall and I want to open a port in the firewall and have it mapped to a specific xp pro machine on the network. I am currious about which port to use an...
My remote users connect to the corporate office using WatchGuard VPN Client on Windows XP. In the corporate office is a FireBox X Edge X55e.
Most of the time, clients can connect and use t...
Hello experts! I am trying to get my mail server to tag it's global IP address on outgoing email however it is not working. I have followed this guide: http://www.watchguard.com/support/faqs/f...
