We have 2 branch offices that are connected to our corporate headquarters through a watchguard vpn (soho to firebox). Each office has a broadband internet connection of at least 1 mbps up and...
I have successfully been able to get a VPN working using the MUVPN client with IPSec. Now there is a new problem, our graphics people use Mac and our developers use Linux. Watchguard's IPsec...
Hi
Our environment
Exchange 2003 sp2 running on windows 2000 AD server.
This happens once in a a blue moon, but will happen to between 3 and 10 emails.
All other emails will be fin...
We've moved to a new building with a new ISP and new external IP range. Moved the Watchguard Firebox to new building and tried changing IP address to new IP range. Internal\Trusted network see...
I have a Watchguard Firebox. I want a VPN passthrough to a Windows 2003 server. I created a PPTP packet filter and pointed it to the IP address of the RRAS server. I cannot connect to the serv...
We purchased a firebox x700 to replace our firebox III. We are also in the process of changing isp providers so i thought now would be a good time to switch out the fireboxes. I saved the conf...
Hi, I have a trouble making a VPN behind to firewall WatchGuard, I open ports for vpn comunications, but the WG block port 0.
This the screen print
http://www.altositio.com/mauriff/imagenes...
I am configuring the Firebox Edge and have turned on PPTP service. I have configured my XP workstation to connect to the firewall using PPTP. I connect, authorization occurs, and the connectio...
Hi All,
I look after a Cisco 837 router for one of my clients. It works perfectly, except recently i have been asked to set up a vpn to another office.
The other office is running a W...
I have an X750e in service. i am about to connect 25 laptops to our network via vpn. there are 2 clients watchguard offers.
Watchguard Mobile VPN with ipsec 10.1 and
Watchguard Mobile V...
I have a Firebox 550e with two WAN ports configured and I need to route traffic for a certain external website. I need to route any traffic from the LAN that wants to get to this particular we...
Hi Guys,
Our primary domain controller has gone done and we had to rebuild it. Our MUVPN users are now unable to get access. I am presuming that there has to be an MUVPN client/services in...
Hello,
I am trying to configure a VPN tunnel between 2 sites using a Watchguard x55e at one site and a Zytel Zywall 35 on the other.
When I try to establish this connection I continually...
Hello,
I have a Watchguard Firebox 550e running fireware 9.1. I am recieving an error that states "SMTP Headers size is too long" from certain recipients. This error is coming from the S...
Deny 60.55.107.165 10.0.0.2 16529/udp 57107 16529 0-External Firebox denied 129 101 (Unhandled External Packet-00) rc="101"
Deny 24.67.136.8 10.0.0.2 10094/udp 61514 10094 0-External Firebo...
Hi Experts,
I have just setup a new WatchGuard Firebox X750e Core using Quick Setup Wizard without add additional policies or made changes. I happy that it is working by browsing Internet.
...
I continue to get the following error: [attachment denied by Watchguard SMTP proxy (type "application/vnd.openxmlformats-officedocument.spreadsheetml.sheet", filename "filename goes here.xlsx")]
Hi, I need help configuring a Firebox X Edge firewall to allow remote users to use VPN connections. I have set up a muti-homed Windows 2000 Server as a VPN server. I am not trying to connect...
Setup a VPN tunnel with a co-location group, I have a Watchguard x550e running fireware v 9.0.
The tunnel is active on the Watchguard, but I'm when I ping I receive " Destination net unreach...
This hopefully is a newbie question.
In our Watchguard configuration, we have about 7 external ip addresses set up as Aliases. (Set n the Network Configuration Dialog Box -> Interfaces Tab -...
I have never really understood the Bandwidth Meter and what these indicators actually mean... We are experiencing issues with our hosted apps. Clients complaining of slow response times. Here ...
trying to connect a remote vpn user to an watchguard x55e.
been able to connect all the time but now getting....
1/31/2008 10:55:35 PM IPSDIALCHAN::start building connection
1/31/2008 10...
I need to allow youtube, but block all other streaming media with our WatchGuard Firebox X1250e v10.1 firewall. Any ideas?
Im trying to get WatchGuard Firebox 1000 to use Windows Radius instead of local user database. Every time I try to connect I get an error saying Error 649: Account does not have permission t...
We made a change to our network's central site. We changed the subnet mask from /24 to /21 and created VLAN's on the backbone switch. Since that change the VPN traffic coming into the Firebo...
