Hello Experts,
I have a network with one public IP address assigned to a watchgaurd firebox x500 firewall. I need to install a cisco 3000 concentrator behind this firewall. The lan port on ...
Hi. I have a watchguard firebox x750e firewall running System manager v.10.0.2 and policy manager v.10. One of my users is trying to gain access to [http://74.52.122.18/cpanel] and keeps ge...
I am trying configure my Firebox Edge e20. I have checked with various sites that enable port scanning. I have ran into a few questions however. If my ports are labeled as "stealth" does this ...
X55e in one location - Exchange is hosted here and fileserver
X10e in another location - Branch office accesses data from the above
There is a manual vpn connection setup with the followin...
Hi there,
A customer of mine is moving into a serviced office that gives it's clients access to a shared wireless network.
The wireless network is on a range of 10.0.0.0 with a subnet m...
I have been working on creating a IPSec VPN tunnel between my office (firebox X550E) and my home (SOHO 5). If I set the Phase 1 settings in my office to Agressive, the connection is forced an...
We are trying to port forwarding on soho 6 box. Our vendor says "Please forward Ports 80 and 4000 to the internal IP address, I dont see any option on soho 6 control panel for this
I need create a VPN site to site between Firebox x700 ( client ) and Cisco ASA 5510 ( remote ). i don't understand how i can create this vpn. I need help!
Thanks!
I'm having trouble getting PPTP traffic to pass through a Watchguard Firebox X Edge (on the remote side) and ISA 2004 (on my side) to a Windows 2003 RRAS box.
I can connect fine if I bypass...
I am having a little trouble customizing PPTP. I want some PPTP users to have access to a certain network and not another. However, I only can seem to VPN in if I have users in the "PPTP-Use...
I have recently purchased a Firebox X Core e-series (x550e) firewall, with the understanding that I can subscribe to WebBlocker to block some/all users to some/all URLs, but is it possible for...
I use installed Mobile User VPN Version 7.3 to connect to my WatchGuard X750-e
It connects and I log in fine; however, although I am connected, I cannot ping any IP addresses on the Truste...
My customer has dual T1's coming from TWTC into a Cisco 1841. Currently they have a Sonciwall SOHO2 that needs to be powercycled 2-3 times per day. So we purchased a Watchguard Firebox x550e.
...
I get this error when I go to a Sharepoint site through a watchguard http proxy.
Response denied by WatchGuard HTTP proxy.
Reason: header 'Content-Type' denied rule='Default' value='(none...
I would like to setup a forward for an internal IP address very similar to a static route in a Cisco Pix firewall. So far, I've only been able to find how to port forward, but then all entrie...
how do i create a dmz on watch guard firewall
Hello,
I have a watchguard firebox lll. I am having a problem with outgoing email. Some domains (maybe 2%) do a reverse lookup on the our domain and it does not resolve correctly for them a...
I have a similar question to a previously posted issue:
I have a watchguard firebox lll. I am having a problem with outgoing email to only a few domains like AOL. I think the issue is with...
Trying to setup a VPN tunnel with a co-location group, I have a Watchguard x550e running fireware v 9.0.
I think I setup the tunnel correctly on the Watchguard, but I'm not sure how to tes...
We have a WatchGuard X10w-e that weve established a BOVPN secure tunnel with (back) to a WatchGuard X750-e.
When we restart the BOVNP we get a brief moment of internet activity, then it dr...
Firebox x55e
and
Firenox x10e
Unable to connect via MUVPN client to x55e.
There is a Manual VPN (site to site) setup and am able to check the logs on the x55e by connecting to the x10e...
I have a Watchguard III/700 and I am configuring NAT to my internal server from Public I.P address in my range. I have configure the following so far.
Please note Real base is internal Exch...
I have a watchguard firebox edge x20 firewall and I want to open a port in the firewall and have it mapped to a specific xp pro machine on the network. I am currious about which port to use an...
My remote users connect to the corporate office using WatchGuard VPN Client on Windows XP. In the corporate office is a FireBox X Edge X55e.
Most of the time, clients can connect and use t...
I have an X700 that has failed during an upgrade from v9.1 firware to v10, I cannot connect to or ping the units IP in normal operation. I removed the box from production and decided to go the...
