I have a Watchguard x1000 configured where the external interface [x.x.x.2] routes by default through my ISP router [x.x.x.1]. I have added a 2nd router that NATs outbound traffic at [x.x.x.3...
Hello, I am attempting to joing two branches together. This is a school. The two branches are connected together right now via a point to point, which we want to cancell once we connect them...
Hi I am a contractor with a couple of contracts. I currently have Linksys VPN for one client to connect to their boxes, but need to install another VPN client called WatchGuard Mobile VPN to d...
I'm having an issue routing from a WatchGuard Firebox III/700 to a D-Link DFL-1100. We have several other VPNs that are running without a hitch, but this one and one other (with a Vendor) are...
Hello experts! I am trying to get my mail server to tag it's global IP address on outgoing email however it is not working. I have followed this guide: http://www.watchguard.com/support/faqs/f...
I am not expert in networking, but I would appreciate it if anybody could explain it to me.
A friend of mine set up a network a medium-small sized firm. One of the primary purposes is to prev...
Cannot Connect to Management Servers NAT FireBox via System Manager, gives error SSL connection Handshake failed, but can connect & mange unit fine by using 'connect to device' had this probl...
I am working with a Firebox X700 and dont have any experience with these. My boss wants the following:
1. Limit browsing on about 10 specific computers to about 10 specific sites. Meaning, t...
Hi,
My network setup is as follows:
1. US Robotics 9113 modem/router with IP PPP extension (DSL connection via PPPoA)
to
2. External Interface of Firebox x1250e (Running Fireware 10.2...
I have to set up videoconferencing to an external location over the internet.
The system, eyecatcher, is behind the firewall and i opened all the required ports on the wachtguard firebox.
...
Hello Experts!
In order to protect our network a friend of mine recommended me to buy a firewall (we have our network with a Linksys router)... so we decided to buy the Watchguard x55e...
...
I have a Watchguard Firewall X500 Connected to my DSL Modem. I have plugged in my laptop using the following Static Settings: Ip Address: 10.0.0.5
255.255.255.0
10.0.0.1
DNS: 4.2.2.2.2 ...
Can you run WatchGuard VPN and Cisco VPN on the same computer?
I have a number of Firebox units that I need to setup on DSL lines that have single static IP addresses.
I have tried a number of different DSL bridge modems, but can't get any to work prop...
Cant access external IP's from Internal network. get error that it cant not be accessed, but can ping the names and get the external address correctly.
Can hit the server internally from in...
Where can I get information on rages of international IP address? I am setting up my firewall and need to block all the international IPs.
Thank you all!
We are upgrading from a Watchguard x5000 in Drop in mode to a x5500e to Routed mode.
Since the current config is in Drop in Mode all the rules have both public IP's and interal IP's listed i...
I'm in the process of setting up a new Watchguard firewall on our primary Internet connection. I have the webblocker service enabled to limit the sites people can gain access to, however, som...
Is it possible to force all web traffic through to a remote proxy with a Watchguard Firebox.
For example, forward all requests on port 80 to 10.10.10.10:3128.
Any help would be greatly ...
I'm currently using a split configuration for MUVPN clients, where their internet bypasses the VPN. I need to setup the x550e to allow MUVPN clients to send HTTP and SMTP traffic through the...
I am setting up a new WatchGuard Firebox x550e. I've done the initial set up and have added the device to our network. We're able to browse the Internet fine, and now I would like to add a P...
We just upgraded to the Watchguard Firebox III/1000 which is almost a completely different product. Everything seems to be working except Norton Liveupdate and Windows Update. It seems both th...
interesting little problem I am having with trying to use a Cisco VPN client to connect to a remote client through my WatchGuard X750e. Now, we have another client that we connect to the same ...
I have a Firebox Edge installled on my network, and have been assigned a public IP 125.254.66.14 as the static IP from my ISP. At the moment the Firebox is connecting to the ISP via PPPOE. I h...
Every so often, one of the users on our network will receive an email over and over again. This is a seemingly random problem. More often than not, the email includes an attachment, and the at...
