I have looked thru many answers and have taken bits and pieces of configs to reconfigure a PIX firewall I'm working on...This is the first time I've had any dealings with a PIX...Help...
I can ping from the PIX to the outside world...but from a PC connected on the inside of the pix..i am unable to ping or browse or anything...please help!
Here is my config...
PIX Version 5.2(6)
nameif ethernet0 outside security0
nameif ethernet1 inside security100
enable password xxxxxxxxxxxxx encrypted
passwd xxxxxxxx encrypted
hostname pixfirewall
fixup protocol ftp 21
fixup protocol http 80
fixup protocol h323 1720
fixup protocol rsh 514
fixup protocol rtsp 554
fixup protocol smtp 25
fixup protocol sqlnet 1521
fixup protocol sip 5060
names
access-list ping_acl permit icmp any any
access-list acl_out permit icmp any any
pager lines 24
logging on
no logging timestamp
no logging standby
no logging console
no logging monitor
logging buffered debugging
no logging trap
no logging history
logging facility 20
logging queue 512
interface ethernet0 10baset
interface ethernet1 10baset
mtu outside 1500
mtu inside 1500
ip address outside 199.72.87.226 255.255.255.248
ip address inside 192.168.100.1 255.255.255.0
ip audit info action alarm
ip audit attack action alarm
arp timeout 14400
global (outside) 1 192.168.100.22-192.168.100
.240 netmask 255.255.255.0
global (outside) 1 interface
nat (inside) 1 0.0.0.0 0.0.0.0 0 0
access-group ping_acl in interface inside
route outside 0.0.0.0 0.0.0.0 199.72.87.225 1
timeout xlate 0:05:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 rpc 0:10:00 h323 0:05:00 si
p 0:30:00 sip_media 0:02:00
timeout uauth 0:05:00 absolute
aaa-server TACACS+ protocol tacacs+
aaa-server RADIUS protocol radius
aaa-server LOCAL protocol tacacs+
no snmp-server location
no snmp-server contact
snmp-server community public
no snmp-server enable traps
floodguard enable
no sysopt route dnat
isakmp identity hostname
telnet timeout 5
ssh timeout 5
terminal width 80
Cryptochecksum:xxxxxxxxxxx
xx
Start Free Trial
