Yet another Cisco Pix question from me. I need to setup a RDP connection directly to a machine at 192.168.18.2 behind a Pix 501. I currently have a vpn tunnel between 2 PIX 's and can RDP into the machine that way, but I need a backup incase the VPN drops. I need to do this without disturbing the vpn connection. Thanks in advance for your Help, here's the currently running conf (without the changes that I made that didn't work):
PIX Version 6.3(5)
interface ethernet0 auto
interface ethernet1 100full
nameif ethernet0 outside security0
nameif ethernet1 inside security100
enable password ********* encrypted
passwd ******** encrypted
hostname ****
fixup protocol dns
fixup protocol ftp 21
fixup protocol h323 h225 1720
fixup protocol h323 ras 1718-1719
fixup protocol http 80
fixup protocol rsh 514
fixup protocol rtsp 554
fixup protocol sip 5060
fixup protocol sip udp 5060
fixup protocol skinny 2000
fixup protocol smtp 25
fixup protocol sqlnet 1521
fixup protocol tftp 69
names
access-list 10 permit tcp any host xxx.xxx.xxx.xxx eq pptp
access-list 10 permit gre any any
access-list 10 permit icmp any any echo-reply
access-list 10 permit icmp any any time-exceeded
access-list 10 permit icmp any any unreachable
access-list 10 permit ip 192.168.18.0 255.255.255.0 192.168.16.0 255.255.255.0
access-list 10 permit ip 192.168.16.0 255.255.255.0 192.168.18.0 255.255.255.0
access-list 10 permit ip 192.168.18.0 255.255.255.0 192.168.17.0 255.255.255.0
access-list 10 permit ip 192.168.17.0 255.255.255.0 192.168.18.0 255.255.255.0
access-list 90 permit ip 192.168.18.0 255.255.255.0 192.168.16.0 255.255.255.0
access-list 90 permit ip 192.168.18.0 255.255.255.0 192.168.17.0 255.255.255.0
access-list 100 permit ip 192.168.18.0 255.255.255.0 192.168.16.0 255.255.255.0
access-list 100 permit ip 192.168.18.0 255.255.255.0 192.168.17.0 255.255.255.0
access-list 100 permit ip 192.168.16.0 255.255.255.0 192.168.18.0 255.255.255.0
access-list 100 permit ip 192.168.17.0 255.255.255.0 192.168.18.0 255.255.255.0
pager lines 24
icmp permit any inside
mtu outside 1500
mtu inside 1500
ip address outside yyy.yyy.yyy.yyy 255.255.255.240
ip address inside 192.168.18.1 255.255.255.0
ip audit info action alarm
ip audit attack action alarm
pdm logging informational 100
pdm history enable
arp timeout 14400
global (outside) 1 interface
nat (inside) 0 access-list 90
nat (inside) 1 0.0.0.0 0.0.0.0 0 0
static (inside,outside) XXX.XXX.XXX.XXX 192.168.18.2 netmask 255.255.255.255 0 0
access-group 10 in interface outside
route outside 0.0.0.0 0.0.0.0 zzz.zzz.zzz.zzz 1
timeout xlate 0:05:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 rpc 0:10:00 h225 1:00:00
timeout h323 0:05:00 mgcp 0:05:00 sip 0:30:00 sip_media 0:02:00
timeout sip-disconnect 0:02:00 sip-invite 0:03:00
timeout uauth 0:05:00 absolute
aaa-server TACACS+ protocol tacacs+
aaa-server TACACS+ max-failed-attempts 3
aaa-server TACACS+ deadtime 10
aaa-server RADIUS protocol radius
aaa-server RADIUS max-failed-attempts 3
aaa-server RADIUS deadtime 10
aaa-server LOCAL protocol local
no snmp-server location
no snmp-server contact
snmp-server community public
no snmp-server enable traps
floodguard enable
sysopt connection permit-ipsec
crypto ipsec transform-set *******
crypto map 2detroit 20 ipsec-isakmp
crypto map 2detroit 20 match address 100
crypto map 2detroit 20 set peer aaa.aaa.aaa.aaa
crypto map 2detroit 20 set transform-set *****
crypto map 2detroit interface outside
isakmp enable outside
isakmp key ******** address aaa.aaa.aaa.aaa netmask 255.255.255.255
isakmp policy 9 authentication pre-share
isakmp policy 9 encryption aes
isakmp policy 9 hash md5
isakmp policy 9 group 2
isakmp policy 9 lifetime 86400
telnet timeout 5
ssh timeout 5
console timeout 0
terminal width 80
Thanks again!
Matt
Start Free Trial
