Looking for the SNMP OID for CPU utilization on an ASA 5510. I want to plug this in to MRTG so I can generate utilization graphs.
Hi guys,
i'm currently looking for information about iptables. More specific about the options and a couple examples of the NAT- and Mangle table.
I found some info about the NAT table but...
Hi,
So I already have squid setup and running ... seems to be working very well. However I would like to be able to add a second set of filters that are based on IP to only allow the follow...
Today I received some traffic messages I have never seen before. They are coming from different IPs and are only hitting port 80. Any suggestions as to what this is? Below is a sample of my...
Situation: (this is more a question than needing help on a config)
<--------------VPN TUNNEL--------------->
Remote PIX-------NAT Device/INTERNET--------------Local PIX
...
Hi Experts,
In our network we have websense installed integrated with Checkpoint and AD. We have one site running Websense Central server and all other servers are filtering servers. We hav...
I am in the progress of creating a VPN tunnel through a PIX 515 to a PIX 501. Both ends shows the state of QM_IDLE. What does this mean, and shouldn't it show connected instead? I'm pretty ...
I'm looking to find out if anyone has done anything like what I'm proposing here and can confirm whether it will work:
I have a customer with two Internet connections. They have the one co...
I have a problem with the VPN connection, for a Tz170. After connecting and using eitherthe Citrix or RDP connection to connect to the server, after around 5-10mins the Citrix or RDP connecti...
I want to view the logs for Checkpoint firewall.
The file is *.log, but i can't open it with notepad, textpad or any other common text editor.
Is there a special tool that opens checkpoint ...
In my SYSLog I am seeing a lot of events:
%PIX-4-405001: Received ARP request collision from 10.36.81.2/000d.56b8.ed59 on interface inside
%PIX-4-405001: Received ARP request collision from ...
I'm playing around with my Cisco PIX 501 firewall, and have the following setup:
web server --------------------------Cisco PIX 501----------------------------outside host
10.10.10.10/24...
A Windows 2003 Server running RAS, VPN, PPTP and L2TP IPSec, which TCP and UDP ports do I need to open on my firewall so for example the Generic Routing Encapsulation packets etc.
If someon...
Ok so we recently introduced VoIP into out office which runs on 192.168.11.0/24 and our data runs on 192.168.10.0/24
To get everything working we disabled DHCP on the SonicWall and now have...
Hi,
How must network administrator of my university to configure the firewall to allow yahoo voice chat communication? I need this service to video conference between university. Thank in ad...
When i type in "https://192.168.1.1/startup.html" (without the quotes) in the web browser it asks me to accept a certificate, i do, then it asks me to enter a username/password. i leave both b...
Hi Folks,
Any suggesions on how to block the Skype (http://www.skype.com - free Internet telephony that uses Decentralized P2P ) at the firewall or security app level?
- JD
I have configured a Cisco ASA 5510 via the ASDM for a remote access VPN tunnel. It is configured to do pre-share authentication and then pass user authentication to an IAS server to query agai...
in PIX speak, what exactly does "fixup protocol" mean/do
thanks
Hi.
I have installed Squid proxy server in my Windows 2003 server... i want to add users in the configuration file .
For example, if an administrator needs to use internet, i want to con...
I have a client who has a Cisco ASA 5505, licensed for 10 users. It replaced a Cisco PIX 501, licensed for 50 users. The downsize from 50 users to 10 users was a mistake on the part of the p...
Installed ACT 2008 Ver 10 on Server and 5 workstations. The database is located on the server and I setup sharing for the stations. The users also want to be able to use their laptops when th...
Need to be able to Reset Fortigate 50A. I don't know the password. I do have a Seriel Cable. I don't have a RJ-45 port for the Console on the back of the Fortigate 50A. I just have a Seri...
I am trying to configure our CISCO PIX 515 (using the ASDM VPN Wizard) to allow remote VPN access using CISCO VPN Client.
I have followed this guide step by step: http://www.cisco.com/en/US...
1)I am attempting to setup a site to site VPN connection from this location to another in Michigan (this is offsite, I don't have access to their equipment). I use a Watchguard Firewall and w...
