Oks, This is for hardcore PIX firewall gurus. I have debugs enclosed in here
and I don't understand this behaviour of the PIX.
This has been taken with Kiwi syslog with level 7 traps (debugg...
I need to allow UDP port 500 in both directions in my firewall as well as protocols 50 and 51. Below is my current configuration. What do I need to add or change? Port 500 is changed to isa...
Hi there,
We installed what I thought was a hardware firewall at a client recently.
However, they have returned it to me, saying it is just a cheap router.
I asked my engineer, and he...
I have a Pix 515 firewall PIX Version 6.2(2). I have very little experience with administerting the firewal so go easy on me ;) It is this easy, my outside AND inside IPs are being changed. E...
Is there a known way to backup a PIX IOS image before upgrade ?
Trying to access any web content from iTunes and not getting any joy ('normal' browser works). According to documentation, iTunes uses the settings in IE (which work by themselves) and there a...
Hi,
I've got the situation where a VPN that was working isn't now. The VPN is between a PIX 515 and a Watchguard 700. The Watchguard box has been upgraded recently to 7.2 version (I don't d...
Good Day
I want to purchase a checkpoint VPN-1 Pro Gateway firewall(i do not own any checkpoint products),do i need to buy a management console too,or does it already include 1
Thank you
...
I am using clark connect Hom edition as a firewall for my business, but in the content filter i cannot seem to add hyphenated URLs to the ALLOW list.
For example, if i add www.experts-exch...
Please excuse my ignorance, but I'm new to the PIX ballgame, but learning fast.
When booting up the pix I get this error and not sure what to make of it.
ethernet1 interface can only be ...
When this was first happening I was running the 6.2(2) code. I have since upgraded to 6.3(3) and I turned off icmp reply. The PIX runs fine for about 10-20 minutes and then you are unable to...
I configured the pix to do pat from inside to outside and it worked great. The next day I configured 8 access-lists to the inside and outside interface. I also put an ip address on the dmz and...
Is there a list of IP subnets that are assigned to networks in differnet countries or regions? I would like to block everything except US subnets from accessing my mail server. I have looked a...
I am setting up a PIX 515E in a hotel setting and I would like to allow guests VPN access back to their respective offices. Essentially the PIX should allow VPN traffic to pass through from t...
PC is behaving as though a firewall is blocking incoming queries, but I have uninstalled and/or disabled all that I know of (Zone Alarm uninstalled, Windows firewall disabled, etc). Is there ...
My company's LAN has a SonicWall SOHO3 that serves as a NAT/Firewall/VPN appliance. There is a web server behind it running Windows 2000 Server / IIS 5 for a custom ASP application (live site)...
Ok I have been reading on here for days and think I have a pretty good idea of what I am looking for and need. To start, I am looking to implement a VPN solution for a Small Busisness with < ...
I have set up our PIX and IAS server per instruction from CISCO:
http://www.cisco.com/en/US/products/hw/vpndevc/ps2030/products_configuration_example09186a00800b6099.shtml
But when I try t...
I have a pix 501 that was already configured before I started working with it. I have never had to work with one before now, so I am not sure i have the proper syntax.
I have the followi...
Hi.
In thinking about security for my PC, I am interested in better understanding what the benefits of a hardware firewall are to system security - as compared to a software firewall.
I ...
Dear Experts
My company has a sbs2000 server running mainly for ERP application.
, Citrix Metaframe XP presentation sever has also been installed
for our remote users access.
(Server Int...
Our engineers have a fair amount of experience with SonicWall, a small amount with Cisco PIX, and a large amount with WatchGuard. We are fairly new to the Cisco, but felt we needed to go ther...
Does anyone have a list of flags and what they mean for the show local-host command? Can this be used in trouble shooting? Any suggestions for troubleshooting besides the logs?
EX:
Int...
I don't see a category for IDS so I'm asking here. My budget is $5000, I'm tasked with finding an IDS appliance for that amount.
Does anyone know of anything out there that will fit my budget?
I have only one account on Windows XP Pro. When I get into Norton Internet Security Pro 2004, it says that Intrusion Detection is off. When I try to turn it on, I get an error "Failed to sav...
