---from a router config--------------
crypto pki trustpoint TP-self-signed-265710673
enrollment selfsigned
subject-name cn=IOS-Self-Signed-Certificate-265710673
revocation-check none
...
I have two firewalls in two sites, NOT connected. I 'm having the same problem in both sides: The Firewall is not capable of routing.
(There are not routers other than the ISP routers in t...
We have a web server located on the dmz that needs to see a network drive located on the internal port. Is there a way to configure the pix to allow this without opening up too much? This is o...
I recently had to re-install the Altiris Deployment Solution due to a hardware failure on one of our servers. We are running version 6.8 of the console. Everything has worked so far, but I a...
Hi all,
I don't know if this is the correct ta.. let me know if I'm wrong.
I want to run my own webserver at home and I want to connect it to my broadband connection.
This broadband con...
I have a similar problem to this thread:
http://www.experts-exchange.com/Networking/Q_20691153.html?query=portmap+translation+creation+failed&searchType=all
I did take some steps detailed ...
I have an issue with OWA. When I try to access it via https://mail.domain.com/exchange I get
Error Code: 500 Internal Server Error. The target principal name is incorrect. (-2146893022)
...
I currently have an Internet and an Intranet Server residing behind a Raptor Firewall along with my pdc and bdc servers. Remote users sitting behind a different gauntlet firewall cannot acces...
I'm trying to change the password on my PIX501, currently I only need to hit "return" to go into enable mode ...
My Config is ....
PIX Version 6.3(5)
enable password ******** encr...
I have put a new pix 515 in place and used the same security interface command to allow routing client vpn coneection back out over the same interface. The packets are being dropped with this ...
Hi guys,
I'm trying to secure my management sessions to remote PIX/ASA's by ensuring they get encrypted over the VPN connections.
I have the VPN's working correctly and the SA's are esta...
Quick Questions.
Does anyone know how to reset the SSM module, which is the module that has the AV/Spam so I can get to the Wizard portion? Seems like someone might have tried to start ins...
I have to disable the firewall in Norton Internet Security 2007 in order to access my company VPN. What do I need to configure in Norton to allow VPN access without having to turn off the fire...
I am trying to set-up a policy based VPN between a Netscreen 208 OS 5.0 & a Cisco PIX 506E 6.3
Phase proposals are working fine, it fails on phase 2 error on the Netscreen is:
Received a n...
is there any reliable way of killing logmein on a network? the netscreen firewall has 17 ip addresses blocked which are logmein servers. websense has the protocol barred. still it works.
I can ping from Inside to DMZ.
I can ping from DMZ to Outside
But I cannot ping from Inside to Outside
the config follows:
access-list OutsideACL extended permit icmp any any echo
...
hello
where is the setting to allow for a VPN tunnel (client software) to be created behind the firewall? I have a TZ 170 enhanced.
thanks in advance.
What advantage does an SPI firewall offer over a NAT firewall for a home user with 4 PCS connected to a router? Is the SPI firewall a lot more secure or just a bit more secure than a NAR fire...
Hi,
I am trying to setup VPN between at Pix 515E and cisco 1841
I need help getting it to work
i followed instruction here
http://www.cisco.com/en/US/products/hw/vpndevc/ps2030/prod...
nbtstat - a 10.0.1.82
Local Area Connection:
Node IpAddress: [10.0.1.76] Scope Id: []
NetBIOS Remote Machine Name Table
Name Type Status
...
Hi,
Can anyone help? I'm tearing my hair out trying to restrict my childrens use of MSN Messenger 7.0(Beta). I have tried any number of solutions I have found on the Web but none work. I a...
Hi,
This is really an extension of my previous post. I managed to track down the issue behind high cpu utilization, which was indeed caused by a worm. The worm caused a lot of hosts to open...
Experts,
Below is a dump of my ssh client log (Putty). It seems during a period of inactivity (30 min to an hour), Putty times out and disconnects from the Linux (RHEL4) host. I have all ...
Hi there,
We are enabling Outlook Web Access on our network over an HTTPS connection (port 443 I believe). We have two Windom ws 2003 servers one of which is running exchange.
These are ...
Hi all,
The session counter of my Netscreen 5GT doesn't seem to be releasing sessions as the counter just goes up and up, eventually reaching it's limit and requiring the device to be reset...
