I got an HP Pavillion with Vista - wiped and installed XP.
The PC guy installed NVIDIA drivers and a trial of ActiveArmour firewall - now I can't install any software without it hanging up an...
Dear Sir
I'm running Checkpoint Firewall Clustering with StoneBeat Cluster software. Firewall version is NG FP2, I implement HP OpenView and need to receive SNMP trap from CheckPoints...
I need to do an analysis of our current rulebase and would like to export it. Does anyone have a procedure to do this! We are running Checkpoint NG FP3 on secureplatform.
Thanks in advance.
Hello Experts, I'm a newbie in PIX Firewall. I'm trying to setup VPN using PIX 506E Firewall. We have a domain network with about 200 users. I configured VPN using VPN Wizard in the PDM. I cre...
Here is the problem I am having with windows firewall.
First the basics:
All PCs are XP SP3
Server is 2003 SP2
I am trying to open some ports using group policies.
I created a group p...
Hello,
I am running ISA 2004 in 2 locations. I am trying to establish a PPTP static tunnel in both locations for replication. One side works fine while the other side won't connect. If ...
what is the role of firewall in INTRANET
My company just installed an ISA 2004 Firewall. We have an application that WILL NOT WORK behind the firewall, it works fine when the firewall is not in place. The manufacturer of this progr...
I want to change the internal interface speed. For some reason my download speed has decreased to 70 Kbps. I have reset the pix a few times and reset the modem, the switch is new. I want to ch...
any one could point me to the right direction ?
i have an older version which expired, then i tried to install a new one in, which i bought rather then renew it
it kept having the old regi...
ok. I'm done with the design part of the ASA on the network, I've asked a lot of question so far, but now I am down to the configuring interfaces/sub-interfaces on the ASA-so please bear with ...
My PIX 501 is running 6.3(4) software, and I'm trying to enable SSH connections to replace telnet to the PIX from my LAN hosts. The book I have on CISCO PIX firewalls says to enable host and ...
Hi there
We are running a PIX 506E, 6.3(1). We use the PDM for any config changes so have never had any use to change the Telnet password (the previous net admin changed it and didn't leave...
What ports do I need to allow to share Filemaker databases over a LAN? I am allowing port 5003 but with no joy. When I allow any TCP traffic between the DMZ where the database is and the cli...
Can the pix 501 be reset to factory defaults without using the console cable? If so how?
Hello Experts:
I urgently need to configure smtp traffic into my exchange 2003 server. I have exausted all posibilities on this device. Config is
outside interface: xx.xx.185.102
Natiin...
hi....in our firewall asa 5520, the cpu utilization shoots high as like 80%, in that case how can i troubleshoot for the same...
what are alll the that i need to collect and how to analyse ...
Hi,
I want to know the differences, plus and minus points between Cisco's PIX or ASA and Checkpoint NG.
Checkpoint NG installed on there secureplatform (Linux)
This question is further to w...
Hello,
I am receiving the error "regular translation creation failed for protocol 50...." when establishing an IPSEC VPN connection from inside my 515E v7.0 firewall with a Cisco VPN clien...
Hi All
I want to block P2P application using IPCOP fiirewall, any help
We are behing cisco ASA 5540. Due to some business reasons some of our users need to use MS PPTP VPN client to connect a remote vpn server. But ASA firewall does nto allow them to do so. When ...
I need to remove the FIXUP for the SIP protocol in the ASA 5505 we just bought, I tried just entering the command preceeded by the word no but that wouldn't get rid of it, did they change it f...
I am trying to copy the running config from my Cisco ASA 5510 device to a tftp server but I keep getting an error.
Message received:
Result of the command: "copy running-config tftp://20...
Hi people,
Having a problem getting the websense network agent to find IP addresess. Where is the best place to intsall the network agent. I currently have it on the same box as the websen...
Hello
Does anyone know what this log means?
<162>Dec 18 2008 12:40:21 asafw : %ASA-2-106006: Deny inbound UDP from 172.16.1.1/2675 to 192.168.255.1/4419 on interface inside
I checked...
