Top Solutions

I"m stuck at "acquiring ip address" in status window, my log says connection enabled, but I'm not connected.

Hello,

My CISCO VPN Always was working, since 4 days when i try to connect i'm getting this error msg:

Secure VPN Connection terminated by Peer.Reason 433: (Reason Not Specified by Peer)

How i'm able to fix it and what is the...

Hello,
I have been connecting to a VPN concentrator for the past two years with my old pc.  I received a new Dell D820 and have only had it successfully connect once.  When I try to connect, after a few seconds I get the error, "Secure VPN...

Hello,

is it possible to get windows mobile user vpn working in windows 7 (64bit)?
When I try to install the previous vista (x64) Watchguard client software, I receive an error while installing the virtual network card.

When I install it...

Hi
I configure In our ASA site-2-site IPSec connections - I add new interface "office"
Need add office network to exist S2S IPSec link
I add exempt rule on office interface and office networks in local networks (remote site do also)

Old...

I am currently working on getting 802.1X authentication to work in an wired test environment (for later deployment). However I am unable to get it to work.

My prerequsities:
 2008 AD DS server with DNS, DCHP and NPS (as a Hyper-v client)
...

Hi,

I have a problem with commonication between two Exchange servers 2003.

exAsrv-FWsiteA----VPN------FWsiteB----exBsrv

Where:
exAsrv - Exchange 2003
exBsrv - Exchange 2003
FWsiteA - Cisco ASA5505 ver 7.2(2)
FWsiteB - Cisco ASA5505...

What is the correct debug command(s) to debug a site to site VPN?  I have been using the ASDM logging viewer, but I would rather view this log info in a ssh/terminal session.

I am using a Cisco ASA 5510.

Thanks!

We have a Cisco ASA5510 firewall running ASA 8.2.1 and ASDM 6.2.1.  I'm trying to set it up so an AnyConnect profile will use a digital certificate we've created from our internal authority and have successfully imported into the appliance.  I...

I'm trying to get an IPSec VPN connection to work on iOS and android devices.  I got it to work with PPTP using the Firebox Authentication, but I would like to do it with IPSec instead.  I do not want to use PPTP with Radius.  I have IPSec...

I am looking for a VPN tunnel Shape for visio 03/07

I have a client who has a SonicWALL 2040 at their corporate office and SonicWALL TZ 170s at their stores and they all have a point to point VPN to the corp. office.  They recently moved their corporate office to a new location, but left a store...

When trying to log into our Sonicwall Pro 2040 Enhanced OS with my username and password I get the error  "Login failed - HTTP User login not allowed from here "  or if I try to log into the sonicwall through the vpn i get "Login failed - HTTPS...

I will be setting up a new SBS 2011 Standard server at a non-profit org in two weeks.  Currently there is a peer to peer network.  There are about 15 users onsite.  All these users will be set up to remote access their PC's from home or when...

Hi folks,

I'm installing a Cisco ASA 5510 and I want my users to VPN in using the Cisco Client and IPSec, authenticating to a Windows 2000 RADIUS Server.

This is my first ASA install, and I'm not too skilled with Windows 2000 RADIUS/AAA.  I...

How do I create a Cisco vpn client .pcf file?

For whatever reason, my sonicwall Global VPN Client will not aquire an IP address for the virtual adapter.  It does connect successfully and the handshaking and such goes well.  My Sonicwall log shows no errors but you can definitly see in the...

Hi,

I am getting  "Failed to find MAC address 00:60:73:xx:xx:xx in the system interfaces table". Googled, but no solution.

Thanks.



Application Name:               SonicWALL Global VPN Client
Application Version:           ...

We have a remote client that would just like basic VPN services for two users from home.  The users are 100% remote - never in the office.  We'd like to just use PPTP for ease of use rather than the new SSTP setup.  How can this be accomplished?

I'm having trouble creating a VPN tunnel between a Cisco ASA 5510 v 7.0(6) and a Firebox X7506 v8.3.  I've successfully connected another office using a Cisco PIX 515 to this FireBox using the same configuration but I cant seem to get it to work...

Hi,
I am trying to setup a site to site VPN tunnel between a Sonicwall TZ170 and a Cisco ASA 5505, the tunnel is establishing o.k. but if I try to ping a host on the remote side I get the following error on both firewalls: IKE Responder: IPSec...

Hi, I have taken over support for an office and they have a Cisco ASA 5505. They are trying to set up a site to site VPN with another company, all they sent us was their outside IP , their internal IP structure, the pre share key, the encryption...

Ok so here's the issue. I have a UTM-1 270 NGX R65 with VPN turned on. I am using the certificate method for authentication with the latest Secureclient installed (ver. NGX R60 HFA2 Build 002). A remote user can connect to the VPN using the...

I have a MS Forefront TMG server v6.x running on Server 2008.  There is an external subnet configured for internet traffic with a default gateway pointing to the ISP.  There is an internal subnet configured on a 10.x.x.x/16 network.  The server...

Question:
1 - I'm following the steps in http://openvpn.net/howto.html
2- my guess is that the error comes from "Generate certificates & keys for 3 clients" because when you generate the server certificates the HowTo says to say yes on signing...

i have a fortiage 80c unit in my office and i followed the instruction in the VPN Guide to configure the IKE Phase 1 and Phase 2. the guide says then i should create a Police with the source as the VPN tunnel i created in Phase1 but i can't find...

Hello, I am having problems with Cisco Anyconnect clients. The ASA is setup to AAA to MS LDAP Server. all is working until a required Password change or password expired change needs to take place. The Cisco Clinet only indicates "Unwilling to...

Hello,

does anyone know why the ApplicationPool in IIS 7 is being stopped ONCE I enable it for 32 bit support ?

I see the following Error in the Event viewer:

The Module DLL 'C:\Program Files\Microsoft\Exchange...

Ive been trying for hours, and not making any progress.

We have a Fortinet 60B Firewall appliance at work and I am currently using PPTP VPN to get a network connection to manage my servers.

The iPhone looks like it uses a Cisco IPSec...

Hi guys.
i'm done... it's been 4 hours of research and testing and i'm just done being a typical man, and i'll ask for help :).

We're using Sonicwall TZ100 enhanced OS 5.6.
Downloaded the SSL VPN NetExtender and set it up like shown on
...

I downloaded the Cisco VPN client version mentioned above as it was a new release which it says in the blurb supports Windows 7 64 bit operating systems. When i try to install the client I get the error message
Error 28011: Windows 64-bit is not...

Hi all,

We would like to build an IPSec tunnel to a customer of ours. We have several tunnels and they are working fine, but this one just won't come up.
This is the scenario, we can use 2 ip adresses to connect to the customer, and we use...

Hello All.

I have a interesting probem. We have a client trying to access another client's ASA 5510 using Cisco VPN client. The client terminates with Reason 433. This has been going on with the client in question for a couple days now. I'm...

I am trying to setup a VPN connection using Anyconnect on a Cisco ASA 5510.

I am using local autentication for test purposes, the Anyconnect client will push from the ASA to the client computer and install successfully.  However when trying to...

I have a Watchguard XTM 2 series.  I am trying to configure the IPSEC mobile vpn to have an IPAD conect on to the network.

Here is my policy :  IPAD-Any    Any     IPADgroup    Any

When trying to connect to the vpn from IPAD, I get the...

I am trying to setup Mobile VPN with SSL for remote users.  I configured authentication using AD and Mobile VPN with SSL.  I can connect to the firebox but I do not have access to any network resources.

Hi,

My local subnet is 10.0.1.x and I'm trying to establish a dial-up vpn connection to a network that is also a 10.0.1.x subnet.  I connect fine but can't access any resources on the remote subnet - which is expected.  All the research I've...

I get this error when trying to connect through Cisco VPN: "Error 5: No hostname exists for this connection entry. Unable to make VPN connection". The program version is 4.08.
Please help. Thanks!

I am having trouble authenticating users to my SSL VPN.  I have already given users the client to install and do not wish to activate downloading of the client from the SSL site just yet.  I am using RADIUS and I already have a IPSEC group up and...

Hello

I have been trying to setup a clientless access on Cisco ASA for some TCP application access, especially for remote desktop access.

i need a WebVPN solution; clients running 64-bit and 32-bit windows OSs should access Corporate...

I have installed Watchguard Mobile VPN v10.22 on my Windows XP SP3 machine.  It will not connect.  It times out and gives this error: VPN Gateway not responding (waiting for msg 2)

Details:
1. On the firebox, I created a user, enabled MUVPN....

I've been working on some NetExtender issues for the past two days and have humbly come to you all for help!

Here's a small narrative: i installed the TZ210 over the weekend, set all of my subnets and firewall rules and everything seemed...

I have a Cisco ASA 5510 that I am trying to configure for remote access VPN.  I need it to work with regular OS -based VPN clients in addition to Cisco's client.  I think to make this work I will need to enable PPTP/L2TP on the ASA but I do not...

I'm having quite a bit of trouble, and Cisco TAC has been working with me for about a week on this now. I think they're more confused than I am.

I'm trying to set up DMVPN spokes with dual/redundant internet connections. Most of them will be...

Here's the scenario: we force password change for domain users, they change it at work, then when they get home, they log on their laptops (which are part of the domain) using old password, connect to the the network using safenet VPN (watchguard...

Hello,

I've recently set up a basic (single NIC) PPTP VPN on Windows Server 2008 R2.  It's working fine, but for some reason I get multiple (hundreds) of error logs with Event 20171 from RemoteAccess.  The errors only appear on system start-up...

Login failed - SSL-VPN clock is out of sync with Active Directory. Please contact your administrator.

I restarted the ssl-vpn 200 and this error come up so i cannot login to the device ..

I check the time on the server and is correct
i'm...

Client OS: WinXP SP2
[Potential] Conflicting Software: ZoneAlarm, Blue Coat ProxyClient, VMware Workstation and Sprint WWAN Connection Mgr.

I first attempted to upgrade my Cisco VPN Client 4.x with this version and then I uninstalled 4.x and...

Need to make Cisco VPN client version 5.0.06.0160 launch before I logon to Windows 7 so that I will be able to logon to my company's domain remotely.

I haved already added runatlogon=1 line to the vpnclient.ini file. However, even with this...

Currently I'm using the built-in user database in the ASA 5505 to create users for VPN. However I'd like to integrate active directory users instead.

I have bits and pieces of what's required to do this...more so that I need to install IAS on...

Folks

I'm trying to configure our USG 100 to allow L2TP VPN connections.

I am trying to work based on the (few) on-line examples but so far I have failed to it working. Phase 1 negotiation seems ok but phase 2 fails with a "No proposal...

I recently purchased a 64-bit Windows XP OS and i'm trying to get a Cisco VPN client to connect like before.  I understand that you can't use the 32-bit version of the client on a 64-bit OS.  I'm still not sure if this is an IPSEC or SSL VPN...

Hi,

I am configuring a IPSEC VPN tunnel between 2 x 1841's and this is the first time I have ever attempted this.

This is a lan-lan vpn. The local lan is the 10.5.11.0/24 range and the remote is the 192.168.0.0/28
The router has 1 public...

Certain computers on the same Lan, connected over a WAN via Remote desktop, to Server 2003 freeze every 2-3 minutes when idle.  It also freezes also nearly every time the remote session is dropped to the task bar when another application becomes...

We have an ASA 5510 with IOA 8.0(2), were using XP systems with VPN client ver. 5.0.2.0090
We have been getting an intermittent error "secure VPN Connection terminated by peer reason 433 (reason not specified by Peer)"
If the users keep trying...

hi,
i need assistance in configuring  SSLVPN in fortigate 80c,
i configured the SSLVPN options, added IP pool , configured the firewall to allow traffic.. but it still doesn`t work
need assistance

thanks in advance

I am trying to set up a site-site VPN between two sites. The Cisco ASA 5505 has a static public IP and the site with an Adtran router has a dynamic IP on the public interface. I have successfully gotten site-site working in other scenarios when...

Hi,

my question is about the "local lan access" using the Cisco VPN client.

When I establish the VPN, all the traffic is injected in the IPSec VPN. Checking the VPN client status (Status / statistics) I see that:
- in "tunnel details", the...

Hi, I am having problem to setup site to site VPN between a Netgear FVG318 box and Sonicwall TZ170.
I have followed the manuals of both appliances but failed all the time. I have also searched out a KB article of Sonicwall talking about the...

hope you can help! im in ireland. going to portugal for april. want to watch the masters golf on my ipad using skygo. i have an irish itunes account. is this possible?

Hello Experts!

I'm working with the Cisco AnyConnect VPN Client on Vista 32-bit, SP1, connecting to a ASA 5520.  I get past authentication, the software downloads, installs and all is well.  It says establishing a VPN connection, then a...

My Cisco Anyconnect VPN client V 2.1.0148 can no longer connect to our VPN site.  It authenticates, and checks for updates and then when it tries to connect, it gives the error message "The VPN Client driver has encountered an error."  No...

I just got my friend's VPN connection dropped. He tried to upload some files for me. First, it seemed the connection was terminated around 5 minutes, and from the last tryout I logged the following.

Is the problem because of my Cisco ASA 5505...

I have a VIgor 3300 and I am having trouble getting a tunnnel to come up to a vigor 2820

here is the log:

1412010-02-20 09:37:30FEB 20 8:37:29Vigor3300ignoring Vendor ID payload [draft-ietf-ipsec-nat-t-ike-00] 
1412010-02-20...

Greetings,

I am trying to configure VPN with Juniper ssg20 and the netscreen remote app. Had a few queries regarding the same caz the one i setup seems to time out and not successful.

I want the vpn to terminate in the untrust zone and...

hi there,
we changed password on our firewall and since then we are unable to access our VPN.
we've upgraded forticlient to latest version and added in a new .vpl with new password however this is what I get.

loc_ip=xxx.xxx.xxx.xxx...

My network looks like this

network a - sonicwall 2040Pro (enhanced) - internet - Dlink - SonicWall TZ170 - network b

I have troble to get the TZ170 on my VPN connection.
The TZ170 is set to transparent.
In the log on the 2040Pro it tells...

Hi Experts,

I'm running ASA Version 8.0(2) and ASDM Version 6.0(2) on my ASA 5505.

And I have set up Anyconnect VPN using SSL VPN Wizard. Also uploaded anyconnect-win-2.1.0148-k9pkg

When I connect using the VPN it's authorizing but not...

Hey Guys, need some help with this one.

I have a client with a Watchguard x550e firewall running Fireware 10.2 that's out of maintenance support so I can't upgrade. They asked us to wipe it and reconfigure and setup iPSEC vpn for mobile users....

Two offices have been using the FVS336G firewall/vpn for IPSEC VPN connections without problems.  Recently, one office was no longer able to connect via the VPN.  (The other office has other VPN connections that are working normally.)  Here is...

My operating system is Windows XP.  I have Cisco VPN software downloaded.  It was working, in that I could get a connection a week ago, then I moved 3-1/2 miles down the road, and now I cannot get a connection at all.  I keep getting this...

Here is the setup.

We have a DSL connection with 1 Static IP address and are using a Linksys RVS4000 VPN Router.  The router is working great as far as DSL connectivity and we have been able to successfully open ports to allow access to the...

Hi

I am having a Site to Site VPN error using the following devices
Device :  ASA 5510   on my site
Device : Cisco Router 2811   on remote site

Errors I got from  ASA 5510 my log file is

4|Jul 14 2007 11:50:28|713903: Group =...

Hello experts,

i want to setup a site-to-site VPN , with two differents firewall, a CISCO ASA5505 and a Fortigate 50B. I thought that it was easy but i'm wrong.
Does somebody have already done that ?

Thanks in advance

Hi,

Last weekend I upgraded my MacBook Pro 17 inch mid 2010 from 10.6.x to 10.7.2. Following the upgrade everything appeared to work great. I can connect to my home network, and access anything I want or need to - except our company VPN. When...

I have a notebook running Windows 7 Ultimate that I use at home and at my office. The notebook is a member of the domain at my office and of course I login to the domain with my user's account. I have a completely different domain at home. There...

We've recently implemented a Cisco ASA 5510 security appliance.  We're planning to roll out SSL WEBVPN, and have the appropriate licensing.  It's working (users can connect and log in using their AD credentials, and get to resources), but we'd...

I have done extensive research on the internet regarding this subject and I am at my wit's end.  I have spent the last few weeks working on configuring a new Cisco ASA 5510 VPN connection utilizing L2TP/IPsec.  The entire configuration is in a...

Hi!
I'm having some issues when I try to browse a file server (or any other pc) from the WEB VPN portal on a Cisco ASA5505.

Sometimes I am prompted for login, and after logging in I am able to list the shared folders, but when I try to enter...

Secure VPN connection terminated locally by the client. Reason 403: Unable to contact the secure gateway.

I have tesed this connect on several different machines. All variables and settings are the same but the one of the systems get the above...

Hi There,
Let me first give a brief background of my problem:
I have 3 users sharing a networked HP Color LaserJet CP2025 in Munich
The users connect to the printer by its LAN IP
The users all connect into London via VPN and use the Terminal...

I have recently set up a network connecting 3 physical locations (1 location has servers, other 2 locations have only workstations and VoIP phones) using SonicWall TZ190 units as border routers.

All 3 physical locations are connected logically...

Hi all
I am having problem in installing Vmware vSphere client. Following error occurs
" The Microsoft Visual J# 2.0 Second Edition installer returned error code '4121'."
I also tried installing vCenter Server and the following error occurs...

I am rather new to the SonicWALL family coming over from Cisco and so far I like the SonicWALL but I am having a few problems with LDAP reading my AD.

I am running on an NSA 240 with firmware 5.6 installed

When I first started playing with...

This is directly related to Q ID: 24687836 ;
I have a Cisco ASA firewall that currently passes on remote access VPN user authentication to a Windows 2000 IAS RADIUS server. I wish to move this to a Windows 2008 x64 server.
I have tried...

Hello all - I am having trouble configuring Remote Access VPN on our ASA 5520.  Here's where I'm at...

Setup VPN IP pool to be the same as internal IP scheme (attached code snippet).  I can connect VPN just fine, but when I try to access...

Hi guys,

I had a router blow up on the weekend and had to replace with an asus wireless router.

I copied all the settings and all the port forwards and things seemed to be going well.

the only problem I have is with one of our VPN...

I am preparing our juniper SA4000 SSL VPN device for use in production and I am having a few problems. I'm getting the stated error message when a client uses Network Connect to try and obtain a network address from an internal DHCP server. I...

I am trying to connect to a Cisco ASA 5505 using the Cisco AnyConnect VPN Client (2.2.0136).  When trying to connect it comes back and says "Unable to process response from <hostname I am using>".

I am running Windows Vista Business Edition.  ...

I am trying to setup a Cisco 5510 ASA Firewall for SSLVPN to allow users to connect remotely to the network. I need to enable two factor authentication using RSA SecureID. RSA hardware has been bought and will be setup shortly.

I am...

Hello Expert

Recently, I have implemented WebVPN using Cisco ASA 5510. Currently, the WebVPN I configured is for accessing one Terminal Server. So branch user or Sales staff able to access it anywhere.

I'm using RDP plug-in in WebVPN, it...

Dear All,

Trying to set up VPN between NETGEAR SRXN3205 and PIX506e.

I am not an expert or networking person at all but did manage to set many VPNs to this PIX before (normaly from other Cisco hardware).

This time I have a problem beyond...

Hi All,

We actually have a vpn connection that is working fine between two zyxels router. Unfortunately, one of the router is dying, so I have to replace it. I have bought the Draytek Vigor 2820 router. So I haven't changed anything at the...

I tried to connecting vpn but...

notification

Initializing the connection using certificate "egarcomputers"
Initiating TCP to xxx.xxx.xx.xx...
Contacting the security gateway at xxx.xxx.xx.xx...
Secure VPN Connection terminated locally...

I was to be able to connect to our Mitel phone network with a spare phone remotely via a VPN. I can get a teleworker solution product from Mitel but it is very expensive for just one phone.

There is another way to get similar results using VPN...

Hallo,

I'm using different Thinkpad notebooks T400/500 with builtin UMTS option (WWAN) and Windows 7, 32bit OS. I would like to connect to the company network using a VPN connection with the Sonicwall Global VPN Client to a Sonicwall router.
...

Hi,

I have windows server 2003. I could connect to remote servers overseas using VPN connection. I had no problem yesterday but today when I tried to connect, I kept getting error message:
"
Disconnected Error 806: a connection between your...

I have a Cisco ASA 5505 and use the AnyConnect VPN client.  It originally installed and connected.  After disconnecting it would not open again without an error.  It would have to be uninstalled and reinstalled.  Eventually I downloaded the...