An have enabled ssh on ESXi and now I want to copy files from my external USB HDD to a folder under root, however, I am unable to mount the USB HDD when consoled in. Any help would be great, t...
Hello!
I have a big problem! I have a SonicWall TZ 170 enhanced and recently changed the password.
However somehow I can not login anymore.
Since my latest backup is not that fresh anym...
Is it possible and if it is then how do I change the administrator's (or any other user's) password on HP-ILO2; ProLiant DL320 G5 using telnet / SSH?
Thanks,
Yariv
Is there a website where I can send external telnet commands to our servers? I want to check that the firewall is configured correctly and hence is allowing certain ports in.
I'm writing an email client application it's basically the same as do telnet to an smtp server. I have tried to do telnet to send some emails to my account but I cant. When I tried to telnet t...
I'm trying to configure WinSSHD on a Windows 2003 SE server (VM, externally hosted by an ISP). I thought I had configured everything correctly. I have a similar setup working on a local server...
Hi
Need a simple bat file/script/shortcut for telnet here.
I usually use telnet (ip address/hostname) in windows to access to a server.
and type in username and password at prompt scree...
How do i Zip up folders from linux red hat shell? I have hundreds of folders to zip up and am clueless in linux! Helpppp. this stuff is on dedicated server at ipower and startx does not work.
I am trying to connect to my cisco router,
i can connect through console but when i try to telnet it shows:
" Could not open connection to the host, on port 23: connection failed "
here is ...
I was configuring a client yesterday for a SQL Server 2005 Express DB. Before building the ODBC connect string, I ran ping <IP Address>; the server replied. I then ran TELNET <IP Adress> 143...
Hi All I have always used Telnet to check for open ports on my systems..I just wonder about one thing can telnet be used to check if there exist open UDP ports..?
Dear , greeting ,,,
In our enterprise, we are going to apply SSH instead of TELNET for all CISCO equipments.
The procedure success for router , switches, and IPS. But unfortunately faile...
After installing Solaris 10 for our Sun Netra T5220
I set IP and I am not able to telnet to the server
Can someone point me to the right direction on setting up telent / ssh for Solaris 10...
Hi
I am running all my hosting pacakges off a dv dedicated server and have root access to the server via ssh access. I am very new to the command line, but i woul say i have a basic unders...
I edit the permit root login as mentioned below but it still says access denied after typing the password...
Step 1a - Enable remote ssh root access
Modify the PermitRootLogin flag to ...
Thanks for looking at my question. I'm trying to setup an ssh tunnel but I keep running into issues that are unknown to me.
So I have a Ubuntu server configured. I can ssh to if from outsi...
I need help writing a Batch Script to delete files that are older than 5 days.
Can someone point me to a good telnet client that can be run on MAC Leopard OS? Better if a freeware can be pointed out.
Thanks
I have setup a Windows 2003 Server with Cygwin and SSH. The purpose of this server is to provide SSH file transfer from the internet to the server. It is essentially going to be used as an S...
How do you put ssh on a cisco 3750 G switch?
Ihave installed RH4WS 32 bit and I am having a problem not encountered before.
I have a static IP address of 162.182.8.114
If I "echo $DISPLAY" it returns ":0.0"
If I enter "xterm&" an xter...
I've verified that traffic is routed through my SSH tunnel that is
setup for SOCKS5 dynamic port forwarding. I see that IE7 is always
trying to resolve the name locally first.
What I'm...
So I'm trying to set up SSH on my freeNAS server, but I seem to be doing something wrong.
I have set up an account with dyndns.org and enabled "Dynamic DNS" on freeNAS
I also have enabled ...
I would like to know how i could make putty works well with solaris.
I made Backspace key work.
But Up & Down keys don't work.
Hello, I have setup SSHv2 on my Cisco 2811 rtr and I am trying to use secure CRT to access it, however I cannot. I guess I don't know the proper settings or something. I used Putty on the sa...
