I have an Hp Ip kvm that I cannot find on our local network. I am sure it has an IP address but I have absolutely no clue what that could be or what network it could be on (ie 192.168.1.0/24, ...
1.) Internet
have a 30mbps pipe to Internet and have a report from the provider that in a 5 minute time span:
5 minute input rate 9320000 bits/sec, 939 packets/sec
5 minute output rate 191...
My domain controller seems to have failed or something. It is a w2k3 server and it just won't browse anymore. It was my dhcp server, but it is not giving out IP addresses and when I take off...
Hi,
I'm looking for a free or cheap Network Monitor tool thats easy to use.
I just really want to resolve computer names against IP address so I can VNC into that PC.
Many Thanks
I have a point to point T1, after rebooting equipment and basic connectivity troubleshooting, I am getting no more than about 20K up and down through my point to point T1 connected by Cisco 16...
Hi Experts,
Is anyone aware of a network opensource monitoring software? Something similar to Orion from Solarwinds.
Any freeware utility will be a lot better to avoid any licensing problem...
Hi,
Could anyone explain to me or provide some information/links that can provide me with the use of command "Tracert" & "Route print". Please also provide me with the explanations on how ...
I have Apache 2 loaded on two different webservers, each serving its own website. When either site is accessed with Firefox via http://<website>/server-status, the expected status screen appea...
In the past I used a freely available product called netbench. It was perfect for what I needed. Unfortunatly I no longer have the copy that I had and am looking for a good substitute. Or if ...
Hi,
Now that ISA Server is being scrapped from SBS 2008 we are looking for options for a real time network monitoring tool that integrates with Active directory, produces detailed reports, ...
I have a cisco 3725 router and cisco SDM 2.5. On the interface status I have a box that says "Bandwidth Usage" and it has a bar chart next to it and a percent next to that. This is not the s...
I have installed SolarWinds Engineer Toolset v 9.0 on our application server. I would like to take full advantage of it's capabilites for network monitoring, establishing baselines, etc. I do ...
I've just captured some raw data from my network with Wireshark.
I would like to analyze this to make sure that there are not things going on that could be causing performance issues inter...
Im trying to setup VTP trunking on s cisco 2960 which has 24 fastethernet ports and 2 gig ports. If i set one of the fastethernet ports to trunk mode it works fine but not on the gig ports.
...
There are times when our network runs slower than it should. Some of it is because of users streaming music and videos. We are a small company and open to what our users can do, so it is not...
I have 7 clients in my office, I am the administrator that controls all of them ... We are sharing a workgroup and there's no server.
about 4 computers are connected via cable to D-Link switc...
I spoke with my internet provider this morning and he informed me that I am maxing out my bandwidth. I have a 768k connection and my downloads speeds right now are somewhere around 7.7kb/s, ...
I need to install some software that will help me monitor my network.
I have heard of some expensive solutions but I am wondering if there are any freebies out there.
I need to be able...
would like to have a software utility that can tell me the DSL network(modem) down times and up times
Hi,
I'm in search of [free] software that will preferable have a server and client function and be able to accurately test the throughput of a) a LAN, b) a LAN-2-LAN VPN, c) and Remote-2-LA...
hello all,
I have a question with regards to routing.
we have a small network of 200 nodes (192.168.4.0/24) and its also VLANd across to another network using a Layer 3 sw. (192.168.5.0/...
I am looking for an easy way to monitor all of the web traffic that takes place on my network. I want to be able to know what computers viewed what websites and at what times. I do not want ...
Hi guys,
We are going to implement employee network monitoring system for our organization according to company policies. The requirements includes Employee's personal E-mail communication,...
Hello,
How can I monitor only the Web Traffic (remote tcp 80/443) passing through a cisco 1841 router?
I've What'sUp Gold ver 8. Can i see that traffic with the graph ?
I just only want t...
Hi,
I'm not a network expert, and I have a need to monitor the data being sent from my web app for security purposes?
What is the best tool around to read this info in a user friendly ma...
