In my windows 2003 R2 domain I am the enterprise admin & domain admin of a single domain forest. We are growing larger than I can manage myself so we are appointing several Technicians to assi...
Here is command for policy-map which i can apply on router:
class-map match-all ENHANCED
match access-group 111
!
!
policy-map ENHANCED-OUT
class ENHANCED
set dscp af21
priorit...
I would like some advice as to how to set up 3 internal networks that share a common internet connection. I presently have available 2 Cisco 2811 routers each with just 2 interfaces on them (...
i have more than 300 user in my company and i want to apply the DHCP service in the organisation.
For 250 user i can make one scop for more than that how i will do it........
please send...
I am looking for a perimeter load balancer that is scalable and reliable
Hello,
I am in the process of setting up a redundant network. Our Data center has two distribution routers of which the second one is an HSRP line. These routers connect to an Active Passiv...
We are running out of IP addresses in our network. We use 192.168.2.x addresses with 255.255.255.0 mask.What would be the best way to expand the scope without disrupting the current setup. How...
I'm completely new to VLANs, but what I've read about them is very interesting, and will potentially be a significant increase in our security. Unfortunately, I'm pretty sure I'm only getting...
Basically I have one Cisco ASA 5510. I would like to integrate it in my Network. Below I will summerise the basic config of my network.
* One Cisco 3845 Router with integrated firewall capa...
Normally a conventional home network is setup by purchasing a "router" by linksys or d-link or somebody, and it is the dhcp server, hands out IP addresses, shares the internet, etc.. All in on...
I already Have build my network infrastructure in the main office including the following Internet Protocol:
1- IP address (Server) .............. 172.16.0.2
2- Subnet Mask ...................
I'm having an issue with routing between 2 subnets (10.79.136.0/24 and 192.168.91.0/24) on the same network segment. I attached a file that illistrates what I'm trying to do. I'm trying to t...
The valid network numbers for class A is 1.0.0.0 to 126.0.0.0
The number of networks in this class is 2^7 - 2
The number of hosts per network in this class is 2^24 - 2
I understand the nu...
I I have a Windows 2003 AD network that is running slow as molasses. The servers are not being taxed in any way shape or form. Here is the setup.
I have three buildings about 600 feet...
We presently have 3 sites (adding a 4th this week) that use the RV0/S series VPN routers. We have a master router (RV016) and the individual sites are setup with RVS4000's. Problem is, the s...
I have configured the users and all is fine there... however when I place the script in the sysvol/domain/scripts folder and log the person who has the script in ther profile properties.. it d...
Is a Windows Server 2003 enviroment with a simgle domain myselg and another guy are full domain admins. With a growing number of users and complexity we have desiced to delegate the tasks of m...
Looking at the CCNA/CCDA Bootcamp to brush up on skills before taking Cisco exam... Any suggestions or comments on UNITEK ?
http://www.unitek.com/training/cisco/ccna_ccda_bootcamp.php#equipme...
The local ISP provides cheaper Internet links in the form of ADSL lines, the cost of which is usually 1/3 of the leased T1/MPLS based links.
Both of these technologies terminate on the ethe...
I am seeking advice as part of a fundamental assesment of how we store files on our WAN.
The scenario is:
200 Site / 1000 user WAN - currently all sites are connected to one main site wh...
I recently got a cisco 871w router. What I want to do is have my DSL box (2wire Homeportal 1000 HW)run into the routher and then from the router goto a switch where all my other network devic...
We have a Sonicwall 5500 firewall attached to a GS748T switch breaking 2 Firewall interfaces up into 4 VLAN segments. each VLAN has its own segment (192.168.x.0/24 x=1,2,3,4).
We then put ...
i am setting up a domain control, its ip is going to be 172.16.56.9
and i have a small network of computers 10.0.5.x
how can i add those computers onto that domain controler without changi...
We recently acquired a 2nd warehouse 2 miles down the block from the existing one. 50 of the 120 employees are going to be moving into that space each with a pc and ip connection. Currently we...
I need to know if a Cisco switch will connect to a Alcatel switch when using their respective 10Gbase-ER XFPs.
As far as I can see they use the same wave length (1550nm), both work up to 40...
