VLan Config hassle

Hi I have created a vlan 200 on  my 3750 core switch. All settings are as other Vlans but my new one reads a status of Down instead of up. Am I amissing something about making this Vlan active. It says it is manual instead of in VRAM but I have written the config.

=== Status Message ===

Vlan184                10.32.30.1      YES NVRAM  up                    up
Vlan185                10.32.0.1       YES NVRAM  up                    up
Vlan200                192.168.200.1   YES manual down                  down
Vlan1000               172.16.0.2      YES NVRAM  up                    up


===Config =====
interface Vlan185
 description ** Student Wireless **
 ip address 10.32.0.1 255.255.254.0
 ip access-group student_vlan_in in
 ip helper-address 192.168.32.10
!
interface Vlan200
 description ** BeBox Vlan **
 ip address 192.168.200.1 255.255.255.0
 ip access-group bebox_vlan_out out
 ip helper-address 192.168.32.10
!
interface Vlan1000
 description ** Sonicwall Gateway **
 ip address 172.16.0.2 255.255.255.0
 ip helper-address 192.168.32.10Start Free Trial