Can some one help me to create this in Packet Tracer Ver. 4.11 files and document?
1) Containing basic network (without ACLs) files.
2) Containing the network with ACLs applied files.
3)...
Cisco 3560 and Vlans (500 points up for grabs here)
we have 2 cisco 3560 switches connected together via fibre using a sfp module runnung as a 802.1q trunk. I have set up 3 vlans on both swit...
We are working on setting up a Voip phone system and I am looking at setting up VLAN's on our switches to allow for a tagged vlan for our voice network. Here is what we have:
Core switch HP...
Hello, I working in an environment that has its own seperate network. The network consists of several Cisco 3750 switches. The network also has some devices on it that send out Multicast traff...
We have a schoolwide network with over 700 computers in multiple buildings. We have a gigabit fiber backbone and appromiately 60 Cisco 3500XL switches and a 6500 series core switch tying it t...
Hello All,
I have a cisco 2950 series catalyst switch. I setup port fa0/23 - 24 to be an ether-channel and a trunk, with the ether-channel being named Port-channel1.
I want to configure...
What is the difference in using straight through cable and crossover cable in connecting a switch?
I have read some books that to connect a two switch together you have to use crossover cab...
http://www.alliedtelesyneurope.com/site/files/supportdocs/at1086 This is the link to the install guide for a Centrecom FS708. My en1 connects to a gigabit auto md1-mdi-x 8 port switch with ...
I am a complete newb when it comes to VLANs, unfortunately the documentation that came with the Dell switches I have hasn't really helped my learning curve. I have six Dell PowerConnect 2716's...
Experts,
We have an HP ProCurve 5412 swtich and 3 Cisco 2800 routers. We also have a main branch which needs to supply non-employees internet access from time to time. Our main brach is o...
im having an issue with scan router it can only save locally. it can not be on a DC or anything with SQL and does not save to a mapped drive. the files it needs to get to is on the server. no...
Hello Experts,
My network:3
- Microsoft Server 2k3 sp2 (both)
- 2 domain contollers - 1 of them is exchange
- both run dns
- symantec Enterprise
I recently created a GPO that wou...
http://www.experts-exchange.com/Networking/Network_Management/Network_Design_and_Methodology/Q_23257886.html
This question is a small continuation of the above completed thread. If I do every...
I am new to vlans and have a very old CCNA but have little experience.
We currently need two vlans, 500 systems ( call it vlan 500 ) and 200 systems ( call it vlan 200 ). All teh supporti...
Hi everyone,
I am trying to setup a small lab at my house for learning purposes. I have a Cisco catalyst switch (2940) where I have created 2 vlans, vlan 1 and vlan 10. My ISAs internal in...
Hello:
I have a brand new 2851 router. I have assigned an IP address to the GE0/1 interface. I have connected that interface to my switch that also connects to my laptop. This is to make s...
Hi friends !
I want to implement true Gigabit network. But I have some doubts in this concern.
You see, I am going to implement a new network with 300 PCs (Desktops). All of them will ha...
Hi Guys,
I am going to be setting up Vlans on one of the networks (5 wireless internet towers) and ran into a little problem with the ip addresses.
I have the vlans as follows:
vlan2: ...
How can I open hyper terminal from windows vista (home , business)
I`ve just started to work with Nortel switches. Have always been working with cisco. When I created a new vlan on a cisco router I created a vlan and assigned a ip address and mask. With norte...
Our company recently opened a second location and to support it, we have linked it to our main location via a T1. The remote location has 10 employees that primarily access the main site via ...
There exist several WAN acceleration devices, like Riverbed Steelhead appliances, that reduce WAN traffic through various compression and data reduction techniques. These devices all have in...
We have two offices that need to communicate in real time across our WAN (created from an encrypted VPN between the two office firewalls). As you know, sharing files across the WAN doesn't wo...
We have a Cisco CSS - Content Services Switch. We use it for round robbin load balancing. It takes a single URL and passes traffic to 24 web servers. The question is this:
Does the CSS take...
Hi Experts,
I'm setting up a new branch office very similar to the one shown in the attached diagram, and wanted to run it by you guys before buying any equipment.
My two questions are:...
