im having an issue with scan router it can only save locally. it can not be on a DC or anything with SQL and does not save to a mapped drive. the files it needs to get to is on the server. no...
Okay so we're looking at possibly making our network uber-redundant. I've been asked to piece together possibilities/costs associated with having dual routers, dual firewalls, switches, etc, ...
We have setup a brand new network with a 2008 server that has exchange 2007.
We are about to add another 2008 server to the domain to run MS Data Protection Manager server...
What is the...
Hi everyone,
I am trying to setup a small lab at my house for learning purposes. I have a Cisco catalyst switch (2940) where I have created 2 vlans, vlan 1 and vlan 10. My ISAs internal in...
We have a Cisco CSS - Content Services Switch. We use it for round robbin load balancing. It takes a single URL and passes traffic to 24 web servers. The question is this:
Does the CSS take...
My Question is this If I have to accomdate 700 hundred users in a single subet , and I have subnet of 10.192.176.0/19 Means 8192 IP addresses .Now if i divide this range to accomodate atl...
Can someone explain to me the technical reasoning behind Cat5e Gigabit Pinouts?
Specifically, why you cannot just create a cable for EIA/TIA 568B using the following pinouts?
White/Orang...
I would like ro segregate our LAN into two sections that both can share our BT ADSL connection but not be able to see each other. We supply epos software and often have to bring in customers P...
How can I open hyper terminal from windows vista (home , business)
Hi I have created a vlan 200 on my 3750 core switch. All settings are as other Vlans but my new one reads a status of Down instead of up. Am I amissing something about making this Vlan active...
I have a stack of 3750 (this acts as the access switch) connected 3750 (this act as WAN router). I need to build a trunk between. There are lot users coming in my 3750 stack access switch. ...
Our company recently opened a second location and to support it, we have linked it to our main location via a T1. The remote location has 10 employees that primarily access the main site via ...
Heres the setup: One big LAN for an apartment complex. All computers are connected to the same Switch, witch connects to a router for internet acces. All tennants have their own equipment (WI...
I am looking for a perimeter load balancer that is scalable and reliable
Hi All,
I have 2 seperate sites connected via a 100Mb LES link. I have been told I that need to connect the 2 cisco switches at each side using VLans, however I am a noob at Vlans, so woul...
I have 4 cataylst 3550 switches with an L3 IOS recently installed.
These 4 switches are to be used at different sites connected via Telewest National Ethernet circuits.
I understand how ...
I'm completely new to VLANs, but what I've read about them is very interesting, and will potentially be a significant increase in our security. Unfortunately, I'm pretty sure I'm only getting...
You have been been given the task of creating a WAN link between your LAN and a new building located 2 miles down the road. The existing LAN has 5 departments (Wholesale, Corporate, Warehouse,...
Hi!
We have a lan with 240 units on the same subnet. 192.9.110.0.
Now we are moving our servers (50 nodes) in to our own site.
and we want to seperate the servers on its own subnet. 192.9...
We have two Catalyst 3560 switches with multiple vlans all with assigned IP addresses and InterVLAN routing established. The two switches are trunked. The IP address of each vlan is the defa...
I have some new servers, which have NICs in them capable of load balancing... unfortunately, I am fairly new to this topic. I've read through the documentation, however I seem to be running i...
I'm setting up a server at my house just to play around with... just because I get all sorts of cool MS software to play around with... I'd like to setup a low end server with HyperV/VMWare/VI...
Hi Experts,
What are main different between following switches ???
a. HP ProCurve Switch 3400cl-24G
b. HP ProCurve Switch 2900-24G
I have followed the features of both of devices ...
Hi all. My business has two buildings that are routed together on a private network.
They each have a broadband internet connection which work beautifully but as I have built up a dependancy...
We have a single site with multiple servers and about 25 users. We host our own website/client portal, MS Exchange, Terminal server and VPN for remote workers. My goal is to segregate internet...
