We have a single site with multiple servers and about 25 users. We host our own website/client portal, MS Exchange, Terminal server and VPN for remote workers. My goal is to segregate internet...
hi all,
we currently have a 255.255.255.0 network (192.168.0.0) meaning - up to 254 ip addersses.
we also have an "atelis" ip telephony system , meaning that our phone lines also take ip a...
Hi,
I want to plan the entire network then what is the necessary plan of action i have to take?
At our church we are interested in displaying a live video feed on various wall mount tv monitors throughout our facility. We would like to use our existing network which is cat5. At this poin...
We have two Catalyst 3560 switches with multiple vlans all with assigned IP addresses and InterVLAN routing established. The two switches are trunked. The IP address of each vlan is the defa...
I am curious if there are any negative issues with using the following address pattern on 2960 switches, cisco routers and xp hosts.
the pattern
192,168.64.0 /23
or
192.168.64.0
255....
Here is command for policy-map which i can apply on router:
class-map match-all ENHANCED
match access-group 111
!
!
policy-map ENHANCED-OUT
class ENHANCED
set dscp af21
priorit...
In my windows 2003 R2 domain I am the enterprise admin & domain admin of a single domain forest. We are growing larger than I can manage myself so we are appointing several Technicians to assi...
Hello all,
I read the White Paper, Enterprise QoS Solution Reference Network Design, and I understand the concept of classifying, marking, policing, and scheduling. However, I am still have...
I am looking for a perimeter load balancer that is scalable and reliable
While selecting infrastructure design for the switches, I was wondering about the pros and cons of cascading switches via back plane and connecting the last one in the series to the core vis a...
At our Admin Office: I currently have three servers in my domain, one is my Domain Controller (Win Server 2000 - origianl server), one is my backup domain controller (Win Server 2000) and one ...
I am looking for a quick answer, hence the points. I am new to networking and could really use some expert advice. I have a router with an IP address of 192.168.1.100 (for example). I have a s...
I have 4 cataylst 3550 switches with an L3 IOS recently installed.
These 4 switches are to be used at different sites connected via Telewest National Ethernet circuits.
I understand how ...
Hi,
Looking for a basic design for a small/medium community college campus. College has about 1200 users in 7 seperate buildings all connected to a MDF. Have two running ISP's, and 1 back...
Hello Experts,
I would like to troubleshoot the connectivity issues I have been having with my Telco Provider..I have a 1841 Cisco router in both facilities and cisco 2950's on each end as ...
Hello,
I am in the process of setting up a redundant network. Our Data center has two distribution routers of which the second one is an HSRP line. These routers connect to an Active Passiv...
We are running out of IP addresses in our network. We use 192.168.2.x addresses with 255.255.255.0 mask.What would be the best way to expand the scope without disrupting the current setup. How...
Hello all,
I have 1 Cisco 1841 with 4 Fastethernet and one serial port, 3 subnets, and one LAN segment.
Requirements:
- I'd like to have a network utilizing the 3 subnets.
- Each of my...
I'm having an issue with routing between 2 subnets (10.79.136.0/24 and 192.168.91.0/24) on the same network segment. I attached a file that illistrates what I'm trying to do. I'm trying to t...
I already Have build my network infrastructure in the main office including the following Internet Protocol:
1- IP address (Server) .............. 172.16.0.2
2- Subnet Mask ...................
Basically I have one Cisco ASA 5510. I would like to integrate it in my Network. Below I will summerise the basic config of my network.
* One Cisco 3845 Router with integrated firewall capa...
I'm completely new to VLANs, but what I've read about them is very interesting, and will potentially be a significant increase in our security. Unfortunately, I'm pretty sure I'm only getting...
hi,
I am trying to emulate a WAN to test routing protocols. i am using 2 physical PC's and running virtual machines on them. the networking is using a Cisco router emulator (Dynagen)
how...
We are looking to switch our network configurations from a point to point to an mpls solution. The impetus behind this is that the reliability of multiple providers for each of the P2P T1's h...
