I would like some advice as to how to set up 3 internal networks that share a common internet connection. I presently have available 2 Cisco 2811 routers each with just 2 interfaces on them (...
I have configured the users and all is fine there... however when I place the script in the sysvol/domain/scripts folder and log the person who has the script in ther profile properties.. it d...
We presently have 3 sites (adding a 4th this week) that use the RV0/S series VPN routers. We have a master router (RV016) and the individual sites are setup with RVS4000's. Problem is, the s...
I I have a Windows 2003 AD network that is running slow as molasses. The servers are not being taxed in any way shape or form. Here is the setup.
I have three buildings about 600 feet...
I am trying to figure out a way to have mutiple gateways to the internet. I have a load balanced web farm with a 100mb connection to the internet. We have a specfic client that needs a dedic...
We are implementing a new switch architecture that adds VLAN technology. Each of our VLANs can operate seemlessly within the immediate building. We have one building (300 yds away from the mai...
Hey Everyone,
I have a CISCO 1811 with 2 WANS going to two different ISPs for redundancy. NAT, IP SLA and route maps have been set up for redundancy and simple fail over. The default rout...
Hi
I have recently acquired a new network, that is located at a single site, accross 2 floors (upstairs and down). This network is running so far on 2x 24 port Netgear 10/100 switches, an...
General Question... I want to learn more about how different switches handle VLAN's, and what is Port trunking? Can anyone post a link to a good read on VLAN's?
Here is my specific questio...
I am currently at a colo facility with many T1 circuits coming into my cage. My provider wants to replace all of them a single DS3 crossconnect with each T1 on its own channel. I am actually...
I am seeking advice as part of a fundamental assesment of how we store files on our WAN.
The scenario is:
200 Site / 1000 user WAN - currently all sites are connected to one main site wh...
I need to be able to create a VLAN for our new IP phone system as we do not have enought IP's in the LAN to assign to all the handsets. I have a netgear FSM7328PS switch which is layer 3. I ne...
I am having a bit of mental block. Can different subnetted ip's run over the same physical segment. I am looking at putting my computer lab on a different subnet than the rest of my organiza...
Hello,
I have a t1 connection with 5 public IP addresses. I have 2 LAN's internally, one is for a PBX/IP phone system and one is for computers, printers etc. I need help connecting my equip...
hi,
i'm trying to track down a networking expert who is familiar with cisco packet tracer.
i have set up a network with various subnets and routers and i am having trouble getting 2 rout...
We have a 2mb private line between our two offices and a Cisco 1700 series router at either end. It's a little slow these days and was looking for some advice as to how to minimise unncessar...
Is a Windows Server 2003 enviroment with a simgle domain myselg and another guy are full domain admins. With a growing number of users and complexity we have desiced to delegate the tasks of m...
I have a Small Business Server 2003 installed with one Domain and about 10 computers. I am unable to browse websites like aol.com, mindspring.com, bellsouth.com. Although it seems random becau...
I need to know if a Cisco switch will connect to a Alcatel switch when using their respective 10Gbase-ER XFPs.
As far as I can see they use the same wave length (1550nm), both work up to 40...
We recently acquired a 2nd warehouse 2 miles down the block from the existing one. 50 of the 120 employees are going to be moving into that space each with a pc and ip connection. Currently we...
i am setting up a domain control, its ip is going to be 172.16.56.9
and i have a small network of computers 10.0.5.x
how can i add those computers onto that domain controler without changi...
We have a Sonicwall 5500 firewall attached to a GS748T switch breaking 2 Firewall interfaces up into 4 VLAN segments. each VLAN has its own segment (192.168.x.0/24 x=1,2,3,4).
We then put ...
Can somebody please help me with this question? I'm not sure I understand the 10.10 private IP addressing scheme. All four of these hosts are connected to a switch. My instructor says that com...
How do I shape traffic on a single port on a Cisco 6509 with CatOS? I need to limit traffic in and out of the port to 5Mbs without dropping any packets over the 5Mbs limit.
I do not think OSPF is properly set up on my network I have the following layer 3 links
4507 Switch GB5/5 Internet Address 10.10.10.2/24, Area 0 (Building A)
Neighbor ID Pri Sta...
