Hello,
I am in the process of setting up a redundant network. Our Data center has two distribution routers of which the second one is an HSRP line. These routers connect to an Active Passiv...
Hi. my question is related to network communication between two sites.please read below first.
1.) in first site,I have two DSL connection with two static IP.on one DSL i have 2 MBPS and on s...
OK, we have a 10/100 CAT5 network throughout the building.
Our HP ML350 servers have gigabit NICs connected to NetGear gigabit switches, then into standard CAT5 cabling to 100mb switches an...
We are trying to get PCI Certified and we're running into a problem with the PIX 501s we still have deployed as VPN endpoints at remote offices. One requirement of the PCIDSS is that IKE Aggr...
Hi Experts,
Here is my scenario. In order to supply all LAN computer with a default gateway (X.X.X.X) to route all internet traffic through automatically I have set on the DHCP server a Rou...
Looking at the CCNA/CCDA Bootcamp to brush up on skills before taking Cisco exam... Any suggestions or comments on UNITEK ?
http://www.unitek.com/training/cisco/ccna_ccda_bootcamp.php#equipme...
I'm setting up a server at my house just to play around with... just because I get all sorts of cool MS software to play around with... I'd like to setup a low end server with HyperV/VMWare/VI...
We presently have 3 sites (adding a 4th this week) that use the RV0/S series VPN routers. We have a master router (RV016) and the individual sites are setup with RVS4000's. Problem is, the s...
cisco 3750 switch >>> hub >>>> LAN,
to implement ip source guard, MAC, IP filter do the pc's need directly connected to switch, or can connect through a hub
Hi there!
I'm managing a Cisco 6500 core with tons of VLANs, and I need to assign a different number for each of them.
Resuming, I need, like, Vlan 5 to be Vlan 80, without losing config...
Hi folks,
I am a network admin for a special school, currently with around 250 machines used by staff and pupils.
At the moment we have a Windows 2003 server environment with Windows XP Pro ...
hi,
i'm trying to track down a networking expert who is familiar with cisco packet tracer.
i have set up a network with various subnets and routers and i am having trouble getting 2 rout...
yet another problem in vlan...
i have this network:
internet>Firewall Cisco pix 501>Switch hp proCurve 4204vl
I have configured on the switch 3 vlan:
Vlan1 - 192.168.1.x
Vlan2 - 192.1...
I do not think OSPF is properly set up on my network I have the following layer 3 links
4507 Switch GB5/5 Internet Address 10.10.10.2/24, Area 0 (Building A)
Neighbor ID Pri Sta...
Hi,
Looking for a basic design for a small/medium community college campus. College has about 1200 users in 7 seperate buildings all connected to a MDF. Have two running ISP's, and 1 back...
I'm looking for reference material (web/text) to help with my networking course.
The perfect reference walks through a typical commercial (>100 users, multiple wiring closets and geographi...
My network, inherited from earlier support person, has a 191.100.x.x scheme on LAN. It works fine with Public ip's provided by ISP. Can I continue using this scheme?
I have two deferent ISPs , ISP 1 is the main and high speed connection. ISP two is DSL connection
and it's functioning as backup link.
in ASA firewall I already configure Static Route track...
Is this possible. We live in an apartment complex with college kids. For that reason, I have decided to set our router up to only use static IPs. My wife is beginning to tell her friends sh...
I am new to the CS-MARS and I cannot find the settings to restrict HTTPS access. Currently it allows my server farm subnet HTTPS/SSH access but I want to be able to add a second subnet. I have...
I am looking for a perimeter load balancer that is scalable and reliable
HI, all.
I need set up RSTP in our company network and need someone to look at our topology and check my "calculations".
First of all, description for attached picture:
R1, R2, R4, R5, R...
Hi experts, this is my scenario.
I have 13 computers at work with one ISP (Cable & Wireless), but I just get a new internet connection with the same internet provider so now I have two Cabl...
I pulled this log from my firewall. I'd really like to know what it means. I also took the diagram from robtek.com
*** denotes changes made for security reasons
FRI OCT 03 16:57:05 2008 t...
what is the host name on a network
