Hi Guys,
I have a block of /25 ip addresses, and I have a dhcp configure on the router, now am receiving messages that says
Free addresses 0
Address in use : 109
Percentage addresses ...
I I have a Windows 2003 AD network that is running slow as molasses. The servers are not being taxed in any way shape or form. Here is the setup.
I have three buildings about 600 feet...
i have L2 switch configured with 7 vlans
i want to use microsoft ISA to do routing between vlans
my question is, is this possible? If possible
do we need 2nic in ISA and 2 nics to connected...
Before I ask my question I want to explain our unique infrastructure. We have two buildings across the street from eachother. Building A has a T1 line serving about 40 computers. Building B...
Hi,
I am trying to test double tagging with two netgear layer 2 switches. I need help in how to do this. I want a vlan capable device (a firewall of some sort) on one side of a switch with a ...
I know Squid by default blocks all traffic access but I'm not sure what settings to edit if someone could take a look at the settings I have attempted to make changes on and let me know if I'm...
I am trying to figure out a way to have mutiple gateways to the internet. I have a load balanced web farm with a 100mb connection to the internet. We have a specfic client that needs a dedic...
Hi,
My organisation is growing fast and I'd like to stay ahead of the game a little with some info on this. I've provided some info below.
1. Can anyone provide a simple 'how to' on the do...
Hello,
We are in the process of setting up 10 servers at a colocation facility and and it has come to our attention that they are not providing a gateway IP that is in our IP block. I woul...
hi
i try to made network design for new building and i nned help to do that
my requiredment for new design is (i have some user connect to internet using wireless connection (laptop)) and ot...
I am currently at a colo facility with many T1 circuits coming into my cage. My provider wants to replace all of them a single DS3 crossconnect with each T1 on its own channel. I am actually...
I have some new servers, which have NICs in them capable of load balancing... unfortunately, I am fairly new to this topic. I've read through the documentation, however I seem to be running i...
Not sure if thats the best title in the world - but let me try to describe what we're doing. We are a software dev. We sell our software using the Software as a Service model. Our developers h...
We have a Sonicwall 5500 firewall attached to a GS748T switch breaking 2 Firewall interfaces up into 4 VLAN segments. each VLAN has its own segment (192.168.x.0/24 x=1,2,3,4).
We then put ...
Hello,
I am looking for advice on the most secure way to configure a network that is used in a Small Office. This network has two servers and five computers. One server is a dedicated web...
Dear all,
First of all I would like to thank any of you guys who took their time to read this post. I appreciate the service you offer.
First and foremost I am a programmer with a sore a...
Hi
I am slightly out of my normal area of working, so need some advice from those in the know...
Currently, I have 4 Linksys SRW2048 Managed Gigabit Switches in my Network, And have just...
we have two 6506's and i want to setup RSPAN to copy all traffic over to a network monitor. I cant really find any solid documentation on configuring RSPAN. Here is the setup.
-All traffic i...
I have two wireless networks, both with publicly routable IP's: 69.12.12.0 and 215.6.6.0, for example (hypothetical addresses). Both have their own individual gateways, DNS, routers, etc.
N...
We have approximately 20 clients on the network. 15 of them being regular users, a few IP based printers and a server or two. The device which we are using is the Cisco 877 ADSL Router for sma...
Hi
I have recently acquired a new network, that is located at a single site, accross 2 floors (upstairs and down). This network is running so far on 2x 24 port Netgear 10/100 switches, an...
Ok this is what is happening....and I suspect this is more complicated...
Office 1 - Branch office running IP adress 10.44.0.0 / 255.255.255.0
connect via a fibre link (No routing at prese...
I am familiar with OSPF but not too familiar with BGP, i am making the question here so an expert can give me a run down answer without going into the nitty and gritty without me having to Goo...
Hello,
Does anyone know of a good cisco emulator (preferably free) that I could use? I would like to setup a test environment which is a mirror of our live environent and then upload our cu...
ok thank you but i have a comment, i feel this is usflul only for internet providers, because why an organisation want to make all its computers IP addresses public ?
and if i got a public ...
