I monitor several remote networks that i have direct vpn links for support.
what are some good NOC software that is inexpensive. it woudl be nice to have a inventory section to track pcs an...
Hi All!,
We are trying to open access to our FTP server from the internet. We are unable to access the FTP at all.
the FTP server is 10.10.10.4
im pretty sure it is an access list issue a...
Hello, I have the following configuration:
My Company:
UC500 Lan 10.192.10.0/24 Wan 81.1.1.1 (static ip)
Home:
ASA5505 Lan 192.168.192.0/24 Wan 61.1.1.1 (dynamic ip)
And want to set u...
Hi everyone. I have recently gone to a test and I was given these4 questions. I would like if possible for you experts here to confirm me if I have answered each of them correctly and if I hav...
Our network services team is unplugging Ethernet cables on all 73 servers at our inhouse colo. I am trying to assist in this project by determining what servers the developers know about so we...
I just bought a new Dell 1525 laptop and am trying to intergrate it into my home office wireless network. The laptop can see and open the desktop shared files....the desktop (XP Pro) can see ...
We recently installed a new ASA 5510 firewall at our office and so far it's been working great with one exception, i am no longer receiving any meaningful information from trace routes, it loo...
I inherited a network here at work where there is no DHCP and everything has a static address. This is great because I have a list of each device and it's address, so I can usually find thing...
My laptop (Thinkpad T61p) is fitted with an Intel 4965AGN and connects wirelessly to my simple home network through a Linksys WRT160n (FW v1.02.2), mac-filtered, no encryption, no tin foil hat...
Hi all,
I am currently setting up Nagios 2 on Debian Etch.
I have come to a crossroads in which type of monitoring to continue with:
1. SNMP
2. Nagios client.
I was wondering if ...
I have a Verizon Broadband wireless internet card that worked very well for 30 days. I used to connect to the internet through this card while also syncronizing my PDA which uses MS Outlook....
Hi,
2 questions
How do you change the version of SNMP running on a windows server from snmp 1 to snmp v2c
How would I check what version of SNMP is running on a windows server?
Tha...
Hi Guys,
I have two nics in a server which receives reports from one network (192.168.120.x) and is queried by our main network (192.168.125.x). The 192.168.120.x network is a VLAN which g...
Hi,
I have a Windows 2000 domain with some Windows 2003 servers installed. I have a mix of Windows XP and Windows 2000 workstations. I need to somehow push out a particular Active Directory...
There is a virtual interface eth0:1 configured on box A with ip 192.168.0.110, netmask ff.ff.ff.0 and the interface eth0 is on ip 192.168.1.113.
The ping is from box B with ip 192.168.0.1 ...
i would like to connect a cisco L3 switch with manageable d-link 1250g switch. Problem is i am not able to figure out how to configure a d-link switchport as a trunk port.
I am trying to setup my home network and seperate a guest network from my private network. The problem I am having is my 3524 switch is not seeing the second vlan. Here is a rundown on my home...
Hello Experts,
I am a little confused. I have got two 3Com 5500G-EI 24 Port Switches, stacked together, building my network backbone. Attached to them I have got a total of sixteen 3Com 450...
hi,
we have a rogue computer that connects to our WAN. i have grabbed its MAC address. i'm wondering if there is a way that i can block this machine from either getting an IP address (we us...
My customer's employees all have laptops with both wired and wireless capabilities. Unfortunately, this usually means that each employee's computer is connected to the LAN with both the wirel...
I have the cisco client and server setup and they are communicating. What is happening is when the user logs on for the first time it takes about 60-90 seconds for authentication to happen, b...
Ok I have a complete public class C network that is subnetted and distibuted into vlan's at a core router. The first half of the class C is carved out into Subnets of 255.255.255.224 and thus ...
Hello !
I have a question about IP address binding. How can I bind the ip addresses for users ?
I mean how can I assign the ip address for one user, so that he only can use that addresss o...
As I understood, A gateway of last resort was an ip address associated with a specific interface on a router.
For example
The command
ip route 0.0.0.0 0.0.0.0 192.168.2.246
produce...
We are experiencing a very strange problem on our network; every day exactly between 10-10:30AM, our network speed including Internet speed slows down. We have a 1.5M T1 line that slows down t...
