Advertisement

08.14.2008 at 08:24PM PDT, ID: 23650388
[x]
Attachment Details
[x]
The Solution Rating System

With so many solutions, how can you tell which solutions are most likely to help you and which ones are not? To provide you with a tool to use, we rate our solutions based on various elements that most accurately determine if a solution is a quality solution. To explain what factors affect the solution rating, here are the elements we take into consideration when formulating our solution rating.

  • The Grade of the Solution
  • The Zone Rank of the Expert Providing the Solution
  • The Number of Author and Expert Comments
  • The Number of Experts Contributing
  • The Feedback of the Community

Your Input Matters
Because of the way the system is set up, the most important variable in this equation is you. As a member of Experts Exchange, you are able to cast your vote on the quality of the solutions in regard to how complete, accurate, helpful and easy to understand each solution is. When you provide your feedback, each rating is adjusted accordingly. So, if you see a solution that has a poor rating that you think is a good solution, let us know by rating it. As you do, the rating will be adjusted and will become more accurate for other members of our site.

If you have any suggestions that you would like to make for our rating system, please ask a question in the Suggestions Zone of Community Support.

Thank you!

9.1

NIC Teaming Question

Asked by rbunn in Network Management, Network Operations, Network Design & Methodology

Tags: , , ,

I am setting up NIC Teaming to create a little failover for my servers.
I have set up the team in the Broadcom software, as well as the intel software on my older servers.

My question weather they should be plugged into the same switch or if I can plug them into different switches.
Here is a description of what my network is set up like.
I have a switch closet with 5 switches(Netgear gigabit). Each switch has a cable going back to the server room to the primary switch (Dell Power Connect Gigabit).
Each of the servers is plugged into the primary switch on nic 1

What I was hoping to do is have a second cable from each of the Netgear switches run back to the server room and plug them into the a backup gigabit netgear switch that has all the servers plugged into it on nic 2.
My thinking is that if the primary switch or the primary nic on one of the servers goes down, all the servers will still be available through the secondary server switch.

So, am I not thinking along the right lines of failover protection here? Do all the teamed nics need to be plugged into the primary dell switch? If so, how would I protect myself from the primary switch failing?

Thanks,
-Rob
Start Free Trial
[+][-]08.14.2008 at 09:09PM PDT, ID: 22235956

View this solution now by starting your 7-day free trial. Setting up your free trial is quick, easy, and secure. We will return you to this solution, unlocked, when you're done.

 

About this solution

Zones: Network Management, Network Operations, Network Design & Methodology
Tags: Dell, Dell, Poweredge 2950, 2950
Sign Up Now!
Solution Provided By: from_exp
Participating Experts: 3
Solution Grade: A
 
 
[+][-]08.15.2008 at 02:59AM PDT, ID: 22236879

Assisted solutions are selected by the member who asked the question as a comment that contributed to their question's solution.

Start your 7-day free trial to view this Assisted Solution or ask the Experts your question.

 
[+][-]08.15.2008 at 05:12AM PDT, ID: 22237485

At Experts Exchange, members can ask their questions to thousands of technology professionals, also known as Experts. Experts compete and collaborate to answer those questions by leaving comments like this one.

Start your 7-day free trial to view this Expert Comment or ask the Experts your question.

 
 
Loading Advertisement...
20081112-EE-VQP-42 / EE_QW_2_20070628