I am in the process of migrating from Lotus Domino 5 to 7. The first step is to move the old V5 server from an NT4 platform to a new Win2003 server platform.
I have created the new server "offline" with the same IP and name. Obviously its only connected to a switch and no other devices so as not to conflict.
I followed recommendations and installed V5 on the new server, made a backup of the original servers data, moved this across, ran fixups and re-indexes and then fired up the server to see if there was any major issues. The only problem I have is that it reports the following at 20 second intervals in the console window:
05/11/2007 11:29:44 Error on Listen function: The TCP/IP stack can't bind a network address
to a TCP socket, please verify that the TCP stack has been properly initialized.
05/11/2007 11:29:44 Error on Listen function: The TCP/IP stack can't bind a network address
to a TCP socket, please verify that the TCP stack has been properly initialized.
05/11/2007 11:29:44 Error on Listen function: The TCP/IP stack can't bind a network address
to a TCP socket, please verify that the TCP stack has been properly initialized.
05/11/2007 11:29:44 Listener task for port CLUSTER is suspending for 20 seconds due to listen
errors
I am wondering if the reason is because I have yet to connect it to a valid network? I am going to try making it live tonight but if anyone has any ideas it would be appreciated. Could the TCP/IP port config be different on the new server an thus need updating?
The TCP/IP port info on the server are as follows (excuse formatting!!) Please note this used to be part of a cluster that is no longer active.
TCP DISABLED
TCPIP2 TCP ZNetIP 10.3.1.35 ENABLED
DISABLED
DISABLED
SPX DISABLED
DISABLED
CLUSTER TCP Cluster Network Net CL01_ZEUS DISABLED
DISABLED
Any help on this may put my mind at ease!
Thanks
Start Free Trial