Edit viewvc.conf

#---------------------------------------------------------------------------
#
# Configuration file for ViewVC
#
# Information on ViewVC is located at the following web site:
#     http://viewvc.org/
#
#---------------------------------------------------------------------------
 
#
# BASIC CONFIGURATION
#
# For correct operation, you will probably need to change the following
# configuration variables:
#
#    cvs_roots (for CVS)
#    svn_roots (for Subversion)
#    root_parents (for CVS or Subversion)
#    default_root
#    rcs_path or cvsnt_exe_path
#    mime_types_file 
#
# It is usually desirable to change the following variables:
#
#    address
#    forbidden
#
#    use_enscript
#    use_cvsgraph
#
# For Python source colorization:
#
#    py2html_path
#
# To optimize delivery of ViewVC static files:
#
#    docroot
#
# To customize the display of ViewVC for your site:
#
#    template_dir
#    the [templates] override section
#
 
#
# FORMAT INFORMATION
#
# This file is delineated by sections, specified in [brackets]. Within each
# section, are a number of configuration settings. These settings take the
# form of: name = value. Values may be continued on the following line by
# indenting the continued line.
#
# WARNING: indentation *always* means continuation. name=value lines should
#          always start in column zero.
#
# Comments should always start in column zero, and are identified with "#".
#
# Certain configuration settings may have multiple values. These should be
# separated by a comma. The settings where this is allowed are noted below.
#
# Any other setting that requires special syntax is noted at that setting.
# 
 
#---------------------------------------------------------------------------
[general]
 
#
# This setting specifies each of the CVS roots on your system and assigns
# names to them. Each root should be given by a "name: path" value. Multiple
# roots should be separated by commas and can be placed on separate lines.
#
cvs_roots = cvs: /home/cvsroot
 
#
# This setting specifies each of the Subversion roots (repositories)
# on your system and assigns names to them. Each root should be given
# by a "name: path" value. Multiple roots should be separated by
# commas and can be placed on separate lines.
#
#svn_roots = svn: /home/repositories
 
# The 'root_parents' setting specifies a list of directories in which
# any number of repositories may reside.  Rather than force you to add
# a new entry to 'cvs_roots' or 'svn_roots' each time you create a new
# repository, ViewVC rewards you for organising all your repositories
# under a few parent directories by allowing you to simply specifiy
# just those parent directories.  ViewVC will then notice each
# repository in that directory as a new root whose name is the
# subdirectory of the parent path in which that repository lives.
#
# You can specify multiple parent paths separated by commas or new lines.
#
# Caution: these names can, of course, clash with names you have
# defined in your cvs_roots or svn_roots configuration items.  If this
# occurs, you can either rename the offending repository on disk, or
# grant new names to the clashing item in cvs_roots or svn_roots.
# Each parent path is processed sequentially, so repositories under
# later parent paths may override earlier ones.
#
#root_parents = /home/svn-repositories : svn,
#               /home/cvs-repositories : cvs
 
# this is the name of the default root
# (ignored when root_as_url_component is turned on)
default_root = cvs
 
# uncomment if the RCS binaries are not on the standard path
#rcs_path = /usr/bin/
 
# ViewVC can use CVSNT (www.cvsnt.org) instead of the RCS 
# utilities to retrieve information from CVS repositories.
# To enable use of CVSNT, set the "cvsnt_exe_path" value
# to the path of the CVSNT executable. (If CVSNT is on the
# standard path, you can also set it to the name of the
# CVSNT executable). By default "cvsnt_exe_path" is set to
# "cvs" on Windows and is not set on other platforms.
#
#cvsnt_exe_path =
#cvsnt_exe_path = cvs
#cvsnt_exe_path = K:\Program Files\cvsnt\cvs.exe
#cvsnt_exe_path = /usr/bin/cvs
 
# use rcsparse python module to retrieve cvs repository information instead
# of invoking rcs utilities. this feature is experimental
use_rcsparse = 0
 
# uncomment if the svn command-line utilities are not on the standard path
#svn_path = /usr/bin/
 
#
# This is a pathname to a MIME types file to help viewvc to guess the
# correct MIME type on checkout.
#
# If you are having problems with the default guess on the MIME type, then
# uncomment this option and point it at a MIME type file.
#
# For example, you can use the mime.types from apache here:
#mime_types_file = /usr/local/apache/conf/mime.types
 
# This address is shown in the footer of the generated pages. 
# It must be replaced with the address of the local repository maintainer.
address = <a href="mailto:cvs-admin@insert.your.domain.here">No admin address has been configured</a>
 
#
# This should contain a list of modules (that is, top-level directories within 
# repositories) that should not be displayed (by default or by explicit path
# specification).
#
# This configuration can be a simple list of modules, or it can get quite
# complex:
#
#   *) The "!" can be used before a module to explicitly state that it
#      is NOT forbidden. Whenever this form is seen, then all modules will
#      be forbidden unless one of the "!" modules match.
#
#   *) Shell-style "glob" expressions may be used. "*" will match any
#      sequence of zero or more characters, "?" will match any single
#      character, "[seq]" will match any character in seq, and "[!seq]"
#      will match any character not in seq.
#
#   *) Tests are performed in sequence. The first match will terminate the
#      testing. This allows for more complex allow/deny patterns.
#
# Tests are case-sensitive.
#
# NOTE: This is for the hiding of modules within repositories, *not* 
# for the hiding of repositories (roots) themselves.
#
# Some examples:
#
# Disallow "example" but allow all others:
#   forbidden = example
#
# Disallow "example1" and "example2" but allow all others:
#   forbidden = example1, example2
#
# Allow *only* "example1" and "example2":
#   forbidden = !example1, !example2
#
# Forbid modules starting with "x":
#   forbidden = x*
#
# Allow modules starting with "x" but no others:
#   forbidden = !x*
#
# Allow "xml", forbid other modules starting with "x", and allow the rest:
#   forbidden = !xml, x*, !*
#
forbidden =
 
#
# This is similar to 'forbidden', but differs in some key ways:
#
#   *) Rather than shell-style "glob" expressions, the values in this
#      list are regular expressions.  You can still prepend a ! character
#      to each regular expression to invert its meaning, though.
#
#   *) It compares not against modules only, but against paths consisting
#      of the repository (or root) name plus the path of the versioned file
#      or directory to be tested.  For example, to see if the user is 
#      authorized to see the path "/trunk/www/index.html" in the repository
#      whose root name is "svnrepos", this authorizer will test the path
#      "svnrepos/trunk/www/index.html" against the list of forbidden regular
#      expressions.  Directory paths will be terminated by a forward slash.
#
# NOTE: Use of this configuration option will *disable* any configuration of
# the 'forbidden' option -- they cannot be used simultaneously.
#
# Some examples:
#
#    Disallow files named "PRIVATE", but allow all others:
#       forbiddenre = /PRIVATE$
#
#    Allow only the "example1" and "example2" roots and the paths inside them,
#    disallowing all others (which can be done in multiple ways):
#       forbiddenre = !^example1(/|$), !^example2(/|$)/
#       forbiddenre = !^example[12](/|$)
#
#    Only allow visibility of HTML files and the directories that hold them:
#       forbiddenre = !^.*(/|\.html)$
#
forbiddenre = 
 
#
# This option provides a mechanism for custom key/value pairs to be
# available to templates. These are stored in key/value files (KV files).
#
# Pathnames to the KV files are listed here, specified as absolute paths
# or relative to this configuration file. The kV files follow the same
# format as this configuration file. It may have multiple, user-defined
# sections, and user-defined options in those sections. These are all
# placed into a structure available to the templates as:
#
#    kv.SECTION.OPTION
#
# Note that an option name can be dotted. For example:
#
#    [my_images]
#    logos.small = /images/small-logo.png
#    logos.big = /images/big-logo.png
#
# Templates can use these with a directive like: [kv.my_images.logos.small]
#
# Note that sections across multiple files will be merged. If two files
# have a [my_images] section, then the options will be merged together.
# If two files have the same option name in a section, then one will
# overwrite the other (it is unspecified regarding which "wins").
#
# To further categorize the KV files, and how the values are provided to
# the templates, a KV file name may be annotated with an additional level
# of dotted naming. For example:
#
#    kv_files = [asf]kv/images.conf
#
# Assuming the same section as above, the template would refer to an image
# using [kv.asf.my_images.logos.small]
#
# Lastly, it is possible to use %lang% in the filenames to specify a
# substitution of the selected language-tag.
#
kv_files =
 
# example:
# kv_files = kv/file1.conf, kv/file2.conf, [i18n]kv/%lang%_data.conf
#
 
#
# The languages available to ViewVC. There are several i18n mechanisms
# available:
#
#   1) using key/value extension system and reading KV files based on
#      the selected language
#   2) GNU gettext to substitute text in the templates
#   3) using different templates, based on the selected language
#
# ### NOTE: at the moment, the GNU gettext style is not implemented
#
# This option is a comma-separated list of language-tag values. The first
# language-tag listed is the default language, and will be used if an
# Accept-Language header is not present in the request, or none of the
# user's requested languages are available. If there are ties on the
# selection of a language, then the first to appear in the list is chosen.
#
languages = en-us
 
# other examples:
#
# languages = en-us, de
# languages = en-us, en-gb, de
# languages = de, fr, en-us
#
 
#---------------------------------------------------------------------------
[options]
 
# root_as_url_component: Interpret the first path component in the URL
# after the script location as the root to use.  This is an
# alternative to using the "root=" query key. If ViewVC is configured
# with multiple repositories, this results in more natural looking
# ViewVC URLs.
# Note: Enabling this option will break backwards compatibility with
# any old ViewCVS URL which doesn't have an explicit "root" parameter.
root_as_url_component = 0
 
# default_file_view: "log" or "co"
# Controls whether the default view for file URLs is a checkout view or
# a log view. "log" is the default for backwards compatibility with old
# ViewCVS URLs, but "co" has the advantage that it allows ViewVC to serve
# static HTML pages directly from a repository with working links
# to other repository files
# Note: Changing this option may cause old ViewCVS URLs that referred
# to log pages to load checkout pages instead.
default_file_view = log
 
# checkout_magic: Use checkout links with magic /*checkout*/ prefixes so
# checked out HTML pages can have working links to other repository files
# Note: This option is DEPRECATED and should not be used in new ViewVC
# installations. Setting "default_file_view = co" achieves the same effect
checkout_magic = 0
 
# http_expiration_time: Expiration time (in seconds) for cacheable
# pages served by ViewVC.  Note that in most cases, a cache aware
# client will only revalidate the page after it expires (using the
# If-Modified-Since and/or If-None-Match headers) and that browsers
# will also revalidate the page when the reload button is pressed.
# Set to 0 to disable the transmission of these caching headers.
http_expiration_time = 600
 
# generate_etags: Generate Etag headers for relevant pages to assist
# in browser caching.
#   1      Generate Etags
#   0      Don't generate Etags
generate_etags = 1
 
# sort_by: File sort order
#   file   Sort by filename
#   rev    Sort by revision number
#   date   Sort by commit date
#   author Sort by author
#   log    Sort by log message
sort_by = file
 
# sort_group_dirs: Group directories when sorting
#   1      Group directories together
#   0      No grouping -- sort directories as any other item would be sorted
sort_group_dirs = 1
 
# hide_attic: Hide or show the contents of the Attic subdirectory
#   1      Hide dead files inside Attic subdir
#   0      Show the files which are inside the Attic subdir
hide_attic = 1
 
# log_sort: Sort order for log messages
#   date   Sort revisions by date
#   rev    Sort revision by revision number
#   cvs    Don't sort them. Same order as CVS/RCS shows them.
log_sort = date
 
# diff_format: Default diff format
#   h      Human readable
#   u      Unified diff
#   c      Context diff
#   s      Side by side
#   l      Long human readable (more context)
diff_format = h
 
# hide_cvsroot: Don't show the CVSROOT directory
#   1      Hide CVSROOT directory
#   0      Show CVSROOT directory
hide_cvsroot = 1
 
# set to 1 to make lines break at spaces,
# set to 0 to make no-break lines,
# set to a positive integer to make the lines cut at that length
hr_breakable = 1
 
# give out function names in human readable diffs
# this just makes sense if we have C-files, otherwise
# diff's heuristic doesn't work well ..
# ( '-p' option to diff)
hr_funout = 0
 
# ignore whitespaces for human readable diffs
# (indendation and stuff ..)
# ( '-w' option to diff)
hr_ignore_white = 1
 
# ignore diffs which are caused by
# keyword-substitution like $Id - Stuff
# ( '-kk' option to rcsdiff)
hr_ignore_keyword_subst = 1
 
# Enable highlighting of intraline changes in human readable diffs
# this feature is experimental and currently requires python 2.4
# 
hr_intraline = 0
 
# allow on-the-fly generation of repository tarballs
allow_tar = 0
 
# allow annotation of files.
allow_annotate = 1
 
# allow pretty-printed version of files
allow_markup = 1
 
# allow compression with gzip of output if the Browser accepts it
# (HTTP_ACCEPT_ENCODING=gzip)
# [make sure to have gzip in the path]
allow_compress = 1
 
# The directory which contains the EZT templates used by ViewVC to
# customize the display of the various output views.  ViewVC looks in
# this directory for files with names that match the name of the view
# ("log", "directory", etc.) plus the ".ezt" extension.  If specified
# as a relative path, it is relative to the ViewVC installation
# directory; absolute paths may be used as well.
#
# If %lang% occurs in the pathname, then the selected language will be
# substituted.
#
template_dir = templates
 
# Web path to a directory that contains ViewVC static files
# (stylesheets, images, etc.)  If set, static files will get
# downloaded directory from this location.  If unset, static files
# will be served by the ViewVC script (at a likely performance
# penalty, and from the "docroot" subdirectory of the directory
# specified by the "template_dir" option).
#docroot = /docroot
 
# Show last changelog message for sub directories
# The current implementation makes many assumptions and may show the
# incorrect file at some times. The main assumption is that the last
# modified file has the newest filedate. But some CVS operations
# touches the file without even when a new version is not checked in,
# and TAG based browsing essentially puts this out of order, unless
# the last checkin was on the same tag as you are viewing.
# Enable this if you like the feature, but don't rely on correct results.
show_subdir_lastmod = 0
 
# show a portion of the most recent log entry in directory listings
show_logs = 1
 
# Show log when viewing file contents
show_log_in_markup = 1
 
# Cross filesystem copies when traversing Subversion file revision histories.
cross_copies = 1
 
# Display dates as UTC or in local time zone
use_localtime = 0
#use_localtime = 1
 
# == Configuration defaults ==
# Defaults for configuration variables that shouldn't need
# to be configured..
 
#
# If you want to use Marc-Andrew Lemburg's py2html (and Just van Rossum's
# PyFontify) to colorize Python files, then you may need to change this
# variable to point to their directory location.
#
# This directory AND the standard Python path will be searched.
#
py2html_path = .
#py2html_path = /usr/local/lib/python1.5/site-python
 
# the length to which the most recent log entry should be truncated when
# shown in the directory view
short_log_len = 80
 
# should we use 'enscript' for syntax coloring?
use_enscript = 0
 
#
# if the enscript program is not on the path, set this value
#
enscript_path =
# enscript_path = /usr/bin/
 
# should we use 'highlight' for syntax coloring?
# NOTE: use_enscript has to be 0 or enscript will be used instead
use_highlight = 0
 
#
# if the highlight program is not on the path, set this value
#
# highlight_path = /usr/bin
 
# should we add line numbers?
highlight_line_numbers = 1
 
# convert tabs to ## spaces (use 0 for no conversion)
highlight_convert_tabs = 2
 
# use php to colorize .php and .inc files?
use_php = 0
 
# path to php executable
# (This should be set to the path of a PHP CLI executable, not the path
# to a CGI executable. If you use a CGI executable, you may see "no input file
# specified" or "force-cgi-redirect" errors instead of colorized source. The
# output of "php -v" tells you whether an given executable is CLI or CGI.)
php_exe_path = php
# php_exe_path = /usr/local/bin/php
# php_exe_path = C:\Program Files\php\cli\php.exe
 
#
# Use CvsGraph. See http://www.akhphd.au.dk/~bertho/cvsgraph/ for
# documentation and download. 
#
use_cvsgraph = 0
# use_cvsgraph = 1
 
#
# if the cvsgraph program is not on the path, set this value
#
cvsgraph_path =
# cvsgraph_path = /usr/local/bin/
 
#
# Location of the customized cvsgraph configuration file.  
# You will need an absolute pathname here:
#
cvsgraph_conf = cvsgraph.conf
 
#
# Set to enable regular expression search of all files in a directory
#
# WARNING:
#
#   Enabling this option can consume HUGE amounts of server time. A
#   "checkout" must be performed on *each* file in a directory, and
#   the result needs to be searched for a match against the regular
#   expression.
#
#
# SECURITY WARNING:  Denial Of Service
#
#   Since a user can enter the regular expression, it is possible for
#   them to enter an expression with many alternatives and a lot of
#   backtracking. Executing that search over thousands of lines over
#   dozens of files can easily tie up a server for a long period of
#   time.
#
# This option should only be used on sites with trusted users. It is
# highly inadvisable to use this on a public site.
#
use_re_search = 0
# use_re_search = 1
 
#
# Split directories and logs into pages.
# Allows ViewVC to present discrete pages to the users instead of the
# entire log or directory.
# Set use_pagesize to the number of entries you want displayed on a page.
#
use_pagesize = 0
# use_pagesize = 20
 
# Limit number of changed paths shown per commit in the Subversion revision
# view and in query results. This is not a hard limit (the UI provides
# options to show all changed paths), but it prevents ViewVC from generating
# enormous and hard to read pages by default when they happen to contain
# import or merge commits affecting hundreds or thousands of files.
# Set to 0 to disable the limit.
limit_changes = 100
 
#---------------------------------------------------------------------------
[templates]
 
# You can override the templates used by various ViewVC views in this
# section.  By default, ViewVC will look for templates in the
# directory specified by the "template_dir" configuration option (see
# the documentation for that option for details).  But if you want to
# use a different template for a particular view, simply uncomment the
# appropriate option below and specify the currect location of the EZT
# template file you wish to use for that view.
# 
# Templates are specified relative to the installation directory, but
# absolute paths may also be used as well.
#
# If %lang% occurs in the pathname, then the selected language will be
# substituted.
#
# Note: the selected language is defined by the "languages" item in the
#       [general] section, and based on the request's Accept-Language
#       header.
#
#directory = templates/directory.ezt
### an alternative directory view
#directory = templates/dir_new.ezt   
#log = templates/log.ezt
### a table-based alternative log view
#log = templates/log_table.ezt  
#query = templates/query.ezt
#diff = templates/diff.ezt
#graph = templates/graph.ezt
#annotate = templates/annotate.ezt
#markup = templates/markup.ezt
#revision = templates/revision.ezt
#query_form = templates/query_form.ezt
#query_results = templates/query_results.ezt
#error = templates/error.ezt
#roots = templates/roots.ezt
 
#---------------------------------------------------------------------------
[cvsdb]
 
enabled = 0
#host = localhost
#port = 3306
#database_name = ViewVC
#user = 
#passwd = 
#readonly_user = 
#readonly_passwd = 
#row_limit = 1000
 
#---------------------------------------------------------------------------
[vhosts]
### DOC
 
# vhost1 = glob1, glob2
# vhost2 = glob3, glob4
 
# [vhost1-section]
# option = value
# [vhost1-othersection]
# option = value
# [vhost2-section]
# option = value
 
#
# Here is an example:
#
# [vhosts]
# lyra = *lyra.org
#
# [lyra-general]
# forbidden = hideme
#
# [lyra-options]
# show_logs = 0
#
# Note that "lyra" is the "canonical" name for all hosts in the lyra.org
# domain. This canonical name is then used within the additional, vhost-
# specific sections to override specific values in the common sections.
#
 
#---------------------------------------------------------------------------
                                  

1:
2:
3:
4:
5:
6:
7:
8:
9:
10:
11:
12:
13:
14:
15:
16:
17:
18:
19:
20:
21:
22:
23:
24:
25:
26:
27:
28:
29:
30:
31:
32:
33:
34:
35:
36:
37:
38:
39:
40:
41:
42:
43:
44:
45:
46:
47:
48:
49:
50:
51:
52:
53:
54:
55:
56:
57:
58:
59:
60:
61:
62:
63:
64:
65:
66:
67:
68:
69:
70:
71:
72:
73:
74:
75:
76:
77:
78:
79:
80:
81:
82:
83:
84:
85:
86:
87:
88:
89:
90:
91:
92:
93:
94:
95:
96:
97:
98:
99:
100:
101:
102:
103:
104:
105:
106:
107:
108:
109:
110:
111:
112:
113:
114:
115:
116:
117:
118:
119:
120:
121:
122:
123:
124:
125:
126:
127:
128:
129:
130:
131:
132:
133:
134:
135:
136:
137:
138:
139:
140:
141:
142:
143:
144:
145:
146:
147:
148:
149:
150:
151:
152:
153:
154:
155:
156:
157:
158:
159:
160:
161:
162:
163:
164:
165:
166:
167:
168:
169:
170:
171:
172:
173:
174:
175:
176:
177:
178:
179:
180:
181:
182:
183:
184:
185:
186:
187:
188:
189:
190:
191:
192:
193:
194:
195:
196:
197:
198:
199:
200:
201:
202:
203:
204:
205:
206:
207:
208:
209:
210:
211:
212:
213:
214:
215:
216:
217:
218:
219:
220:
221:
222:
223:
224:
225:
226:
227:
228:
229:
230:
231:
232:
233:
234:
235:
236:
237:
238:
239:
240:
241:
242:
243:
244:
245:
246:
247:
248:
249:
250:
251:
252:
253:
254:
255:
256:
257:
258:
259:
260:
261:
262:
263:
264:
265:
266:
267:
268:
269:
270:
271:
272:
273:
274:
275:
276:
277:
278:
279:
280:
281:
282:
283:
284:
285:
286:
287:
288:
289:
290:
291:
292:
293:
294:
295:
296:
297:
298:
299:
300:
301:
302:
303:
304:
305:
306:
307:
308:
309:
310:
311:
312:
313:
314:
315:
316:
317:
318:
319:
320:
321:
322:
323:
324:
325:
326:
327:
328:
329:
330:
331:
332:
333:
334:
335:
336:
337:
338:
339:
340:
341:
342:
343:
344:
345:
346:
347:
348:
349:
350:
351:
352:
353:
354:
355:
356:
357:
358:
359:
360:
361:
362:
363:
364:
365:
366:
367:
368:
369:
370:
371:
372:
373:
374:
375:
376:
377:
378:
379:
380:
381:
382:
383:
384:
385:
386:
387:
388:
389:
390:
391:
392:
393:
394:
395:
396:
397:
398:
399:
400:
401:
402:
403:
404:
405:
406:
407:
408:
409:
410:
411:
412:
413:
414:
415:
416:
417:
418:
419:
420:
421:
422:
423:
424:
425:
426:
427:
428:
429:
430:
431:
432:
433:
434:
435:
436:
437:
438:
439:
440:
441:
442:
443:
444:
445:
446:
447:
448:
449:
450:
451:
452:
453:
454:
455:
456:
457:
458:
459:
460:
461:
462:
463:
464:
465:
466:
467:
468:
469:
470:
471:
472:
473:
474:
475:
476:
477:
478:
479:
480:
481:
482:
483:
484:
485:
486:
487:
488:
489:
490:
491:
492:
493:
494:
495:
496:
497:
498:
499:
500:
501:
502:
503:
504:
505:
506:
507:
508:
509:
510:
511:
512:
513:
514:
515:
516:
517:
518:
519:
520:
521:
522:
523:
524:
525:
526:
527:
528:
529:
530:
531:
532:
533:
534:
535:
536:
537:
538:
539:
540:
541:
542:
543:
544:
545:
546:
547:
548:
549:
550:
551:
552:
553:
554:
555:
556:
557:
558:
559:
560:
561:
562:
563:
564:
565:
566:
567:
568:
569:
570:
571:
572:
573:
574:
575:
576:
577:
578:
579:
580:
581:
582:
583:
584:
585:
586:
587:
588:
589:
590:
591:
592:
593:
594:
595:
596:
597:
598:
599:
600:
601:
602:
603:
604:
605:
606:
607:
608:
609:
610:
611:
612:
613:
614:
615:
616:
617:
618:
619:
620:
621:
622:
623:
624:
625:
626:
627:
628:
629:
630:
631:
632:
633:
634:
635:
636:
637:
638:
639:
640:
641:
642:
643:
644:
645:
646:
647:
648:
649:
650:
651:
652: