Link to home
Start Free TrialLog in
Avatar of Mark Litin
Mark LitinFlag for United States of America

asked on

How to scan multiple pages into one document from Kyocera FS-1028MFC

I have a client with a Kyocera FS-1028MFC, and scanning is just fine with the unit except that there seems to be no way to scan multiple pages into a single document, either via the autofeeder or the platen.  

The software being used is Windows 7 Fax and Scan.  I was not able to find customized scanning software on the manufacturers site.  

The destination document type choices being presented include various picture formats, but not PDF, which I have a feeling is involved in the problem.

Does anyone have any guidance as to how to enable multi-page scanning in this situation?

Thanks!
ASKER CERTIFIED SOLUTION
Avatar of Joe Winograd
Joe Winograd
Flag of United States of America image

Link to home
membership
This solution is only available to members.
To access this solution, you must be a member of Experts Exchange.
Start Free Trial
Please see if you can make use of such Third party application which comes as Freeware.

http://www.a-pdf.com/faq/how-to-scan-multiple-pages-into-one-pdf-file.htm
SOLUTION
Link to home
membership
This solution is only available to members.
To access this solution, you must be a member of Experts Exchange.
Start Free Trial
SOLUTION
Link to home
membership
This solution is only available to members.
To access this solution, you must be a member of Experts Exchange.
Start Free Trial
SOLUTION
Link to home
membership
This solution is only available to members.
To access this solution, you must be a member of Experts Exchange.
Start Free Trial
Avatar of Mark Litin

ASKER

Thanks all

I purchased Nuance PaperPort for them, and it works like a charm for their purposes.
> I purchased Nuance PaperPort for them, and it works like a charm for their purposes.

In that case, I think you may have accidentally selected the wrong post as the solution. The post marked as the Accepted Solution recommends DocumentThis. The post that recommends Nuance PaperPort isn't selected as the Accepted Solution — it's not even selected as an Assisted Solution. When you get a moment, please click the Request Attention link so an EE Admin can open the question and then you can re-close it with the Nuance PaperPort post as the Accepted Solution. Also, since you went with PaperPort, read the article mentioned in that post (some distributors are still shipping old point releases of PP14 rather than the latest 14.5). Regards, Joe
SouthMod,
Thank you for the fast response! Regards, Joe
Glad it got straightened out:-)