Test to see if port 443 is open and exchange 2003 is listening
Trying to Active sync Droidx phone
Two part question:
1 - how do I remotely test to see if exchange 2003 is listening to port 443?
2 - if not listening, how do I setup Exchange 2003 to listen for port 443, to allow active Sync?
thx
Two part question:
1 - how do I remotely test to see if exchange 2003 is listening to port 443?
2 - if not listening, how do I setup Exchange 2003 to listen for port 443, to allow active Sync?
thx
Can you telnet to the server on 443? From an external source try telnet mail.domain.com 443
Use this cool website from Microsoft.
https://www.testexchangeconnectivity.com/
You can get the connectivity tested provided you need to give a test account and credentials.
Cheers
Shaba
https://www.testexchangeconnectivity.com/
You can get the connectivity tested provided you need to give a test account and credentials.
Cheers
Shaba
ASKER
I did that and it does say that port 443 is not open or blocked.
How do I see whether or not it is listening in Exhcnge server?
How do I see whether or not it is listening in Exhcnge server?
ASKER CERTIFIED SOLUTION
membership
This solution is only available to members.
To access this solution, you must be a member of Experts Exchange.
ASKER
Is this solution for Exhange 2003 ?
Yes, here is a walkthrough from Petri.co.il
http://www.petri.co.il/configure_ssl_on_owa.htm
http://www.petri.co.il/configure_ssl_on_owa.htm
ASKER
I did telnet and it came back with not connected to port 443
ASKER
is there not a simple way to look at Exchange to see if port 443 is setup?
Is is controlled by IIS, so you should look there. You can also run "netstat -a: from a command prompt to see what ports the server is listening on.
Forgive me, netstat-a no :
ASKER
thx
ASKER
I will look into these soultions next Tuesday.
thx again to all
thx again to all
ASKER
Thx
Taht took care of my problem.
Even thought 443 is a default port within Exchange, I had to hard code the SSL with 443.
It now works
thx again
Taht took care of my problem.
Even thought 443 is a default port within Exchange, I had to hard code the SSL with 443.
It now works
thx again
ASKER