Exchange 2003 SMTP service causing high latency
A client has an Exchange 2003 server. Usually, pings to the outside world reply in around 30ms but they now take anywhere between 300 - 800ms.
Stop the SMTP service on the server and latency returns to normal. Start it up again and after a few seconds the latency has crept back up agian.
I've enabled detailed logging on the SMTP connector and can see that there's a lot of SMTP activity. In particular, one user is mentioned a lot in reference to sending an email with a 15MB attachement to a yahoo address. I assume this is connected to my problem.
In the queue viewer I can see a couple of queues. One of the queues is for yahoo.com and is active. However, there are no messages in the queue when you open it up and click 'Find Now'.
Bandwidth on the broadband connection actually seems ok and largely unaffected by this. However, ping tests are bad.
My question seems to be this - If there's nothing in the queue, then why is the log file reporting so many communications with the yahoo server?
The 15MB attachment seems the likely culpret but I can't delete the message from the queue because I can't see it!
Any ideas?
Stop the SMTP service on the server and latency returns to normal. Start it up again and after a few seconds the latency has crept back up agian.
I've enabled detailed logging on the SMTP connector and can see that there's a lot of SMTP activity. In particular, one user is mentioned a lot in reference to sending an email with a 15MB attachement to a yahoo address. I assume this is connected to my problem.
In the queue viewer I can see a couple of queues. One of the queues is for yahoo.com and is active. However, there are no messages in the queue when you open it up and click 'Find Now'.
Bandwidth on the broadband connection actually seems ok and largely unaffected by this. However, ping tests are bad.
My question seems to be this - If there's nothing in the queue, then why is the log file reporting so many communications with the yahoo server?
The 15MB attachment seems the likely culpret but I can't delete the message from the queue because I can't see it!
Any ideas?
ASKER CERTIFIED SOLUTION
membership
This solution is only available to members.
To access this solution, you must be a member of Experts Exchange.
Hi edz_pgt,
You can also try Promodag monitoring tool. It is a paid one, but free for 45 days.
http://www.promodag.com/
You can also try Promodag monitoring tool. It is a paid one, but free for 45 days.
http://www.promodag.com/
ASKER
@alanhardisty - What a star! Thankyou thankyou thankyou!
I've been banging my head against a wall with this for days. Such a relief!
One very happy bunny.
I've been banging my head against a wall with this for days. Such a relief!
One very happy bunny.
No probs - I'll add guidance on the delaying tactics in a sec!
If you want send large email messages after hours, please make sure you have an SMTP Connector configured (if not - please set one up following this guide - http://www.msexchange.org/tutorials/Configuring-SMTP-Connector.html, then configure the Connector on the Delivery Options Tab and set the option "Use different delivery times for oversize messages" to enabled and then choose your connection time and size and if you want - customize it with the customize button.
See the image below:
Delivery-Options.png
See the image below:
Delivery-Options.png
ASKER
Nice one - thanks very much!
Thanks to amitkulshrestha for your input, too.
Thanks to amitkulshrestha for your input, too.
@edz_pgt: Thanks for your comments.
One more time great tip from alanhardisty. No doubt why he is on top:)
One more time great tip from alanhardisty. No doubt why he is on top:)
On top for now! Demazter promises to overtake me - but he is not trying hard enough yet (laughing).
Thanks Amit.
Thanks Amit.
Check below article
http://www.msexchange.org/tutorials/Logging_the_SMTP_Service.html
How to monitor it.