Current setup: Windows Server 2000 with Exchange 2003 Server Enterprise Edition (in the process of upgrading to Windows Server 2003 Enterprise Edition). One subnet (192.168.0.x) of one local...
Ok. I am really frustrated at this point. I've read almost every thread here and everywhere else, but I am still unsuccessful at syncing over the air with my wiresless devices (cingular 2125 ...
I noticed and increase in size of our backup jobs and research and seen it was the transaction log files totaling up to 47.6 Gb or a months worth or log files. I am running Symantec Backup Ex...
New installation of Exchange 2007 with SP1 on a new domain with clean Active directory. (Note: Mail server is separate from the domain controllers)
I run Exchange Management Console, in Or...
We are trying to set up webmail (Exchange 2000) for our company. The inside IP to our mail server is 10.15.10.15 and the outside address is 64.207.30.34. We have a cisco pix and the static N...
Have setup a new Windows Server 2003 SP1 running Exchange Server 2003 SP2 and enabled a set of users for OWA and OMA.
Have a SSL Certificate on the Default Web site.
Have SSL required on the...
I am receiving this message whenever an external user sends to an end user in-house. This is only happening for one user. The user is on an exchange virtual server on a exchange 2k3 server. Ev...
Trying to create distribution lists in Outlook 2003 containing approximately 400 enteries from Outlook Address Book contacts. Get error "This distribution list has reached the maximum size fo...
I am trying to set up Exchange 2003. I have never used Exchange before. I am basically starting from scratch and do not plan to migrate any settings or mailboxes. I will if I can, but am no...
Hello,
I have created 3 new users and am trying to configure their outlook clients.
After popping in the server and user names, I get a message that says "Unable to open your default e...
Does anyone know what this error means?
This message could not be sent. Try sending the message again later, or contact your network administrator. The client operation failed. Error is [0x...
I cannot mount my information store. I was having trouble with some email. I rebooted the server now I cannot mount the store. All services are started and running fine.
I have a user in the United States with a BlackBerry Curve 8310 that needs to get it set up to receive mail from our Exchange Server here in the United Kingdom.
Since he is in america it is...
I know there are a few threads on this but none have provided a solution for me so I would like to start a new one.
SBS 2003 with Exchange 2003 SP2
IPhone 3G 8GB with 2.0 software
RWW/O...
I have one user with one message that when he attempts to send it gets stuck at message submitted to categorizer. He never recieves afailure message and his other messages seem to go through f...
Error message "The Delegates settings were not saved correctly. Unable to activate send-on-behalf-of list. You do not have sufficient permission to perform this operation on this object."
I...
We are getting the following NDR's when we send out a mailing to a distrubution list:
Example:
The following recipient(s) could not be reached:
atest@earthlink.net on 4/3/2007 9:49 AM
Th...
Problem: When in Outlook 2007 and trying to schedule a meeting with a user/resource I look at their free/busy time and it shows the hash marks. The legend at the bottom says it means "no infor...
Experts:
I need some help after spending and entire day yesterday trying to get ActiveSync to work on our Test Exchange Server on our Test Network. I have been unsuccessful. I started on ...
Hello,
We are running exchange 2007 and have 1 client with entourage 2008 - I have followed all sorts of documentation and still can't get the entourage client to connect to the exchange se...
PDF docs attached to an Outlook 2003 message will no longer open. I have screen print of error message if useful. Please advise how to enable PDF attachment to be opened.
We ran into a problem Friday with our Microsoft Exchange 2003 server where I had to use the use eseutil program to repair the priv1.edb database. Since then, and so far it's only my mailbox, I...
Microsoft Windows 2003
Exchange 2003 SP1
A power cut killed the server and on booting up the Exchange mailbox store and public folders store wont load with the error ID c1041724. I've dea...
Outlook 2007, Exchange 2007, Windows 2003 Domain
I think I've messed something up pretty good here. The issue started with being unable to view the out of office assistant settings. So I fo...
Started experiencing some strange problems recently. To make things
more clear, let me first explain our setup:
I'm the network admin at a small university. We have two domains here,
...
