SrinathS
asked on
How to REMOVE SUSPENDED QUEUE from EXCHANGE 2010?
Hello,
Due to Open Riley, our Exchange Server 2010 Queue is filled with lot of SPAM messages. I'm able to SUSPEND all the QUEUE, but Can't Remove those.
When I select ALL, it DIDN'T GAVE ME ANY OPTION TO REMOVE ALL AT ONCE
Is there any command to remove all suspended queue from Exchange 2010 at once?
Thanks.
Due to Open Riley, our Exchange Server 2010 Queue is filled with lot of SPAM messages. I'm able to SUSPEND all the QUEUE, but Can't Remove those.
When I select ALL, it DIDN'T GAVE ME ANY OPTION TO REMOVE ALL AT ONCE
Is there any command to remove all suspended queue from Exchange 2010 at once?
Thanks.
ASKER CERTIFIED SOLUTION
membership
This solution is only available to members.
To access this solution, you must be a member of Experts Exchange.
ASKER
It's look like something went wrong...I can't even receive Incoming emails from outside domains...BUT I send e-mails to outside domains.... (i.e. Gmail)
I verified even both Client and Default Receive Connectors.... Everything is Same
I verified even both Client and Default Receive Connectors.... Everything is Same
Restart the Exchange Trasport Service and check.
ASKER
I restarted the Exchange Server... Same...
I tested Inbound SMTP using testexchangeconnectivity.c om website. Here is the error message:
-------------------------- ---------- ---------- ---------- ------
Attempting to send a test e-mail message to xxxxx@mydomain.com using MX mail.mydomain.com.
Delivery of the test message failed.
Additional Details
The server returned status code 421 - Service not available, closing transmission channel. The server response was: 4.4.1 Connection timed out
Exception details:
Message: Service not available, closing transmission channel. The server response was: 4.4.1 Connection timed out
Type: System.Net.Mail.SmtpExcept ion
Stack trace:
at System.Net.Mail.SmtpConnec tion.GetCo nnection(S tring host, Int32 port)
at System.Net.Mail.SmtpClient .Send(Mail Message message)
at Microsoft.Exchange.Tools.E xRca.Tests .SmtpMessa geTest.Per formTestRe ally()
-------------------------- ---------- ---------- ---------- ----------
I tested Inbound SMTP using testexchangeconnectivity.c
--------------------------
Attempting to send a test e-mail message to xxxxx@mydomain.com using MX mail.mydomain.com.
Delivery of the test message failed.
Additional Details
The server returned status code 421 - Service not available, closing transmission channel. The server response was: 4.4.1 Connection timed out
Exception details:
Message: Service not available, closing transmission channel. The server response was: 4.4.1 Connection timed out
Type: System.Net.Mail.SmtpExcept
Stack trace:
at System.Net.Mail.SmtpConnec
at System.Net.Mail.SmtpClient
at Microsoft.Exchange.Tools.E
--------------------------
Go to tools and run Exchange Best Practise analyser tool and see there are any errors pointing to connectors.
ASKER
Well,
I'm receiving this error message again and again:
Connecting to remote server failed with the following error message: The WinRM client received an HTTP server error status (500), but the remote service did not include any other information about the cause of the failure. For more information, see the about_Remote_Troubleshooti ng Help topic.
(https://www.experts-exchange.com/questions/26977070/PowerShell-Virtual-Directory-issues-cause-problems-with-Exchange-Management-tools.html)
ACTUALLY I CONTACT MICROSOFT SUPPORT REGARDING ABOVE ERROR AND THEY FIXED IT. BU SUDDENLY IT STARTS SHOWING THE SAME ERROR MESSAGE AND EVENTUALLY THE TRANSPORT SERVICE WON'T RESPOND.
When I try to restart the Transport service, it stopped automatically.
I'm receiving this error message again and again:
Connecting to remote server failed with the following error message: The WinRM client received an HTTP server error status (500), but the remote service did not include any other information about the cause of the failure. For more information, see the about_Remote_Troubleshooti
(https://www.experts-exchange.com/questions/26977070/PowerShell-Virtual-Directory-issues-cause-problems-with-Exchange-Management-tools.html)
ACTUALLY I CONTACT MICROSOFT SUPPORT REGARDING ABOVE ERROR AND THEY FIXED IT. BU SUDDENLY IT STARTS SHOWING THE SAME ERROR MESSAGE AND EVENTUALLY THE TRANSPORT SERVICE WON'T RESPOND.
When I try to restart the Transport service, it stopped automatically.
- You are doing many things simaltaniously. You do changes one at a time and wait for some time for the changes to take effect.
- Make sure the IPv6 is enabled on the NIC. If it is not enabled, enable it and reboot the server.
- Make sure the IPv6 is enabled on the NIC. If it is not enabled, enable it and reboot the server.
ASKER
Okay.
I restarted the server again. And I ran the Best Practices analyzer and it's found any issues.
BUT, I ran Exchange Mail Acceptance Test and it shows two error messages in SMTP:
Error submitting mail
Mail submission failed: Error message: The SMTP host was not specified.
Any idea on this?
I restarted the server again. And I ran the Best Practices analyzer and it's found any issues.
BUT, I ran Exchange Mail Acceptance Test and it shows two error messages in SMTP:
Error submitting mail
Mail submission failed: Error message: The SMTP host was not specified.
Any idea on this?
Does the Send Connector is created on the server?
Are you able to telnet the exchange server on port 25?
Are you able to telnet the exchange server on port 25?
ASKER
Yes, Send Connector is already created and enabled.
I telnet the port 25 and it's responding. I shows Microsoft ESMTP Service is ready...
We are able to:
# Receive & Send Emails to Internally
# Send Emails to External Domains
### CAN NOT RECEIVE E-MAIL from External Domains. There is no queue e-mails at this time.
I telnet the port 25 and it's responding. I shows Microsoft ESMTP Service is ready...
We are able to:
# Receive & Send Emails to Internally
# Send Emails to External Domains
### CAN NOT RECEIVE E-MAIL from External Domains. There is no queue e-mails at this time.
Ok,
Where does you mx record pointing. Does it is pointing to your exchange server?
Are you able to telnet public ip address of exchange server on port 25?
Where does you mx record pointing. Does it is pointing to your exchange server?
Are you able to telnet public ip address of exchange server on port 25?
ASKER
MX record points to Exchange Server correctly. Also I telnet the port 25 again with the public IP address. It's shows the same success message "Microsoft ESMTP service is ready".
I tested Inbound SMTP using testexchangeconnectivity.c om website. Here is the error message:
-------------------------- ---------- ---------- ---------- ------
Attempting to send a test e-mail message to xxxxx@mydomain.com using MX mail.mydomain.com.
Delivery of the test message failed.
Additional Details
The server returned status code 421 - Service not available, closing transmission channel. The server response was: 4.4.1 Connection timed out
Exception details:
Message: Service not available, closing transmission channel. The server response was: 4.4.1 Connection timed out
Type: System.Net.Mail.SmtpExcept ion
Stack trace:
at System.Net.Mail.SmtpConnec tion.GetCo nnection(S tring host, Int32 port)
at System.Net.Mail.SmtpClient .Send(Mail Message message)
at Microsoft.Exchange.Tools.E xRca.Tests .SmtpMessa geTest.Per formTestRe ally()
I tested Inbound SMTP using testexchangeconnectivity.c
--------------------------
Attempting to send a test e-mail message to xxxxx@mydomain.com using MX mail.mydomain.com.
Delivery of the test message failed.
Additional Details
The server returned status code 421 - Service not available, closing transmission channel. The server response was: 4.4.1 Connection timed out
Exception details:
Message: Service not available, closing transmission channel. The server response was: 4.4.1 Connection timed out
Type: System.Net.Mail.SmtpExcept
Stack trace:
at System.Net.Mail.SmtpConnec
at System.Net.Mail.SmtpClient
at Microsoft.Exchange.Tools.E
Disable integrated spam filters of the Exchange 2010. Then restart the Exchange Trasport services. After that run the Ibound mail test.
ASKER
How can I do that?
Also execute:
Set-receiveconnector -identify "your receiveConnector" -connectiontimeout:00:30:0 0
Set-receiveconnector -identify "your receiveConnector" -connectiontimeout:00:30:0
ASKER
When I run that command, I received this error message:
VERBOSE: Connecting to exchange2.domain.local
VERBOSE: Connected to exchange2.domain.local.
[PS] C:\Windows\system32>Set-re ceiveconne ctor -identify "Default EXCHANGE2" -connectiontimeout:00:30:0 0
A positional parameter cannot be found that accepts argument 'Default EXCHANGE2'.
+ CategoryInfo : InvalidArgument: (:) [Set-ReceiveConnector], ParameterBindingException
+ FullyQualifiedErrorId : PositionalParameterNotFoun d,Set-Rece iveConnect or
VERBOSE: Connecting to exchange2.domain.local
VERBOSE: Connected to exchange2.domain.local.
[PS] C:\Windows\system32>Set-re
A positional parameter cannot be found that accepts argument 'Default EXCHANGE2'.
+ CategoryInfo : InvalidArgument: (:) [Set-ReceiveConnector], ParameterBindingException
+ FullyQualifiedErrorId : PositionalParameterNotFoun
ASKER
HURRY!
I added FQDN field with: exchange2.domain.local in Client EXCHANGE2 Receive Connector and then restarted both System Attendant and Transport services.
I'm receiving new e-mails not old one!!!
I added FQDN field with: exchange2.domain.local in Client EXCHANGE2 Receive Connector and then restarted both System Attendant and Transport services.
I'm receiving new e-mails not old one!!!
ASKER
TESTEXCHANGECONNECTIVITY.c om Inbound SMTP TEST SUCCESSFULL!
That's good.
As the issue resolved accept one of the comment as answer.
ASKER
Solution:
Extend Receive Connector Time-Out:
Set-receiveconnector -identify "your receiveConnector" -connectiontimeout:00:30:0 0
Do this for both Client and Default Receive Connectors.
-------------------------- ---------- ---------- ---------- ----------
Restart these services:
System Attendeant
Transport
Mailbox Replication
Replication
Then go to to testexchangeconnectivity.c om and do the both Inbound and Outbound SMTP tests. If everything is green, you are okay to relax!
Extend Receive Connector Time-Out:
Set-receiveconnector -identify "your receiveConnector" -connectiontimeout:00:30:0
Do this for both Client and Default Receive Connectors.
--------------------------
Restart these services:
System Attendeant
Transport
Mailbox Replication
Replication
Then go to to testexchangeconnectivity.c
http://alanhardisty.wordpress.com/2010/12/18/exchange-2007-2010-queues-filling-up-with-postmaster-mail-to-invalid-domains/