hello,
i have set up a vpn server on one of our servers in US ,so we use it to re-route and some how for more security ,it was working very well when i used to connect from WinXP ,no problems...
I am replacing my Linksys WRT54G router with a Sonicwall TZ190 appliance to connect my remote office to the main building, 5 towns away. There is a TZ190 in both locations now.
I will still...
We have been eagerly awaiting the release of Juniper's Netscreen Remote Client (the one they purchase from Safenet) with Vista support. We've tried all the Vista compatible releases of the so...
OK here's the deal~
I'm setting up a laptop, its an HP/Compaq 6710b, I took it out of the box, repartitioned and formatted the drive to remove all the useless software that was installed on...
I'm configuring a Fortigate 60B unit for PPTP. The XP computer I'm testing with successfully connect but the default route on the PPP interface is set to itself (machine IP 192.169.200.20 defa...
I plan on upgrading of EOL FB 1000 product to an X550e series with Fireware Pro.
We have a pretty basic one site set with our T1 going into a Cisco 1760 pass-through and that feeding the F...
Hi there
I have a DG834 Netgear router which I have configured for VPN end point. I set it as single PC connection rather than end to end as I have installed Pro Safe client on my home PC, th...
I've had a Windows SBS RRAS / VPN that's worked flawlessly for several years. We have a T1 line. We switched to a PPOE DSL this week and now the VPN will not connect. The other factor that ...
Hi,
I was hoping to find documented instructions with screen shots for Windows Vista on how to setup a VPN connection using PPTP. This will be remoting into a Windows XP Pro SP3 system. I...
I run AD on Windows 2003 in Windows 2000 native mode. I have a Cisco ASA firewall that authenticates via Kerberos to AD. There are no filteres in place and every user in my domain can get thro...
I have a remote site that has our equipment installed on an ethernet network.
We have got an ADSL broadband connection that is linked to the ethernet network.
I want to be able to connect vi...
Currently we run a Smoothwall Corporate Server firewall behind a CISCO firewall (a little paranoia can be healthy).
Smoothwall's primary function is to serve L2TP/IPSEC VPN tunnels to remot...
Hello!
I have couple of locations that are connecting trough the VPN to my domain. There is a dhcp pool of several IP adresses that they can use when they are connected. I'm interested how...
I have a Cisco 2821 router that I have one Point to point static address vpn set up to a linksys wrv200 router. The vpn works fine. I have a vpn set up to allow access for about 12 users by wa...
EMAIL FROM A CERTAIN LOCATION TAKES HOURS TO ARRIVE. THIS APPLIES TO BOTH SEND AND RECEIVE. THEY CAN SEND AND RECEIVE OK TO OTHER LOCATIONS AS WELL AS I. WE BOTH GET NO NDR MESSAGE. I DO GET A...
I was handed a network to deal with that has the following setup. There are several locations and they are all part of a VPN. One location is 10.1.X.XXX and the next is 10.1.Y.YYY and so on. T...
I set up a Windows 2000 VPN server which has two interfaces: 143.174.88.30 (public) and 192.168.0.8 (private). I have other devices on the 143.174.88.xx subnet, 192.168.10.xx and 10.14.8.XX su...
I'm setting up a VPN for users. When they connect, they are assigned a gateway that I did not specify and I cannot locate where to correct this setting.
Afternoon,
I am currently dealing with a **** of an ISP who wont do what i am asking with our managed pix service
I am after an example set of code where a PIX passes through authenticat...
I have a Cisco 501 Cisco PIX Firewall
Version 6.2(2)
Cisco PIX Device Manager Version 1.0(2)
At the present I have a Cisco VPN set up between two offices. I need to be able to allow my s...
I have 2 domain controllers that are members of the same domain.
Each is in a different IP Subnet seperated by firewalls and the internet.
I have reasonably high speed connections betwee...
