Good day.
I recently (with some help from a few people here) got a VPN connection established between 2 ASA5505s. Everything is working good with the exception of DNS capability. I am won...
One router, two computers, two VPN connections
My wife and I both work at home for different companies. We both connect to our corporate network through VPN using wireless laptops connected...
I am trying to set up a VPN between a linksys RV016 and a cisco asa 5510. I have configured both and the vpn will not work.
Any suggestions on how to setup these two to get them to work?
We are in the process of deploying a Cisco Unified Communications system and we've noticed some issues on CUPC. Some users are not able to update their status it just shows offlien and are not...
I have a Pix 520 and a PIX 515, I used the wizard to setup a tunnel between select machines in the home site (imm-pix) and a network range 192.168.2.0 255.255.255.0 in the remote site (sbc_pi...
Dear help,
We are trying to setup access to a remote server. We can connect to the server through the lan (leased line) using rdc.
However when use the dial up connection we get connect...
Hello -
I have Brand: D-Link
Model No: DI-634M
I remember you need to open some port on it in order to connect to VPN. Can you please remind me. Other users connect OK remotely.
...
I'm trying to add a static persistent route to my XP clients after they connect to the VPN.
I'm able to get the VPN connected and the client gets an IP address (172.16.0.x) from the RRAS ...
I have the problem that the vpn client can not get the traffic trough what am I missing
Hi,
I have just setup site-to-site vpn between two cisco 800 series routers, everything is fine but I can't get a static NAT IP. The only IP address I'm getting is the default router's W...
I have been using checkpoint secureclient for the last 2 years and until recently without problem. I have since installed it on some new machines running Vista SP1 and it will just not work.
...
It would be great if someone can point me to something or advise as to how to take backup of the existing image via tftp from the CLI. I am a novice in Netscreen and will be upgrading to 5.4 O...
Hi Guys,
After replacing my old vigor2600plus Draytekrouter with Speedtouch 608 WL clients PC can not dial in.
I have a network running with one single box SBS 2003 SP2 and few clients r...
I have 2 networks that I am trying to setup a VPN. I can get the two to talk and see each other, but I keep getting the following messages in the log
the equipment is as follows: Linksy...
Hello Great Experts,
I need major help. I have a Cisco ASA 5505 configured with everything but VPN working properly. I have been searching and searching but nothing seems to work. I am ab...
Hi,
I have set up a VPN connection from one of my remote offices to my main office using PPTP, I can establish a connection and authenticate OK, but the remote PC gets a subnet of 255.255.255...
Is it possible to setup a site to site vpn between an Untangle router and a SonicWall? If so could you please point me so some instructions? I setup Untangle today after lightning took out our...
Hi, I installed 5 new XPP SP3 desktops for our client on which we installed Checkpoint Secure Remote VPN-1 NGX R60 HFA1 build 19. The VPN works fine, however we can't RDP or share printers o...
I have a new home machine with 64-bit Vista running on it. I can't VPN in to my work machine (Vista 32-bit) using Juniper's WSAM, since it doesn't support 64-bit OS. So I installed VirtualBo...
I am trying to setup a vpn client to my network. I have the setup done on the firewall and I can connect and authenticate. However, when I try to get to anything on my network the logs show ...
Hi,
I have windows server 2003 machine as a part of our network. I have created an administrator user on it.
Now this server system has a shared folder.
I am writing a C# applicat...
I am setting up a Pix 515 and am trying to get the VPN client set up so that I can access computers in my remote office once I deploy it.
I can get the vpn client to connect, and the Pix can ...
ok heres my setup;
DSL modem connected to an asa 5505 then 4 workstations connected to the asa.
the clients were able before to connect to my primary network via Cisco vpn client, then the...
I need to change the static IP settings on a cisco pix
The old address is 61.88.74.119
the new address settings:
IP - 111.235.128.98
Subnet - 255.255.255.0
Gateway - 111.235.128.254
DN...
