Hello, I really need urgent help with my VPN, I have setup a peer to peer VPN and the VPN is up, but I can't see ip addresses on either side, please take a look at my config to and advise what...
Hi,
I was just wondering if the Juniper Netscreen Remote VPN client is ok to use in a network that has a Netgear Prosafe (FVS318) firewall?
Pretty soon I will be setting up a VPN on this...
Issues with VPN to Exchange Server.
From XP Pro I can VPN to the main server, however at that point I do not have access to the LAN through My Computer.
I am Admin.
Is this normal?
I am ab...
I just established a tunnel between a Cisco VPN Concentrator (At the main office) and a Cisco ASA 5510 (Remote location)
On the ASDM of the ASA 5510 it shows "VPN Tunnels, IKE 1 and IP Sec1...
I'm using Vista Home Basic to VPN into a PIX device using PPTP. It works on XP Pro but I get a 828 reason code failure in the event log. It would seem to indicate that it is timing out althou...
Hi,
I need to configure VPN server on our Cisco router 1841
I have following hardware in my router
***********************************************************************************
Cisco...
I am attempting to connect to a VPN with a Windows 2000 Server and receiving the Error 781 message.
I also have a windows XPPro machine that can connect without any problem. Both machines a...
We have a Dell Poweredge 2650 with Small Business Server 2003 Premium installed on it behind a Sonicwall Tele2 network security appliance. Routing and Remote access is configured as well as IS...
I can no longer connect to a Cisco ASA 5505 from my Cisco VPN Client. It worked fine until yesterday and, as far as I know, nothing has been changed at either end. I have more than one PC t...
i just bought 2 Cisco ASA 5505 devices each located on a different building. the two outside vlan's are connected to a T1 connection and the inside vlan's have their own local network.
i have...
Hello, (Firstly I'd like to apologise for the question being so long!)
I have a problem that I have been struggling to solve on my own the last couple of days and i'm totally confused now i...
We are implementing a cisco vpn solution and what I am wanting our users to be able to do is this.
Go to https://vpn.domain.com
This checks to see if the vpn client is installed
Next the ...
This may get a little complicated so bare with me :)
We have a vpn tunnell setup with 2 linksys routers. Now What I would like to do is program a seperate tunnell using a second router on ...
Please direct me to information on how to setup VPN on a VMWare server that's hosted on a server running windows 2003. (VPN Server is also running Windows Server 2003) After that is setup I w...
Here is the issue running both CISCO VPN Client and Nortel VPN Client on the same PC but unable to run the Nortel client after installing the CISCO VPN client. Need both to connect to various...
I've sucessfully created a couple of OpenVPN tunnels and I'm trying to move the project forward and use it in the real world. However, no matter how much I seem to search, I can't find any ref...
We have a cisco pix 501 and use the client vpn feature, not site to site. I set up each laptop at the main office on the lan and put them onto the domain, then ship there pc to them. Each re...
I currently have a VPN that is hub and spoke. All of the remote offices connect to HQ and everything is working well. Recently I have been trying to convert to a partial mesh by setting up V...
I have created a site to site PPTP bridge between 2 domain controllers. The connection is persistent and seems to never go down.
I am have odd DNS issues. If I am on the calling machine and...
I have read a number of VPN connection questions here, but must admit I am still a bit confused. Our setup is as follows: We have a Sonicwall 2040 firewall at our main office. I have 5 remo...
I have a wireless network in my home that I have had for years using the Netgear WGR614 v6 router. I have gotten a new Dell laptop from work and am trying to sign on to access my company netw...
I have a two sites that are currently connected using a VPN with netgear routers. We're looking to replace those routers with a Cisco ASA 5510 on one side and a 5505 on the other side. Both ...
Hello,
I am in an environment that has multiple users which VPN into our network using Cisco 871 routers. We are currently using EZVPN for them today.
The problem that I am running into is...
Hi all, I hope someone can help me out with this.
I work for a small firm and am responsible for relativley simple IT issues which crop up, we have approx 100 users. We have a remote offic...
I have a VPN set up using a Cisco 851 Series router. We're using IPSEC and we're connecting to a main site using a 6 Mbps symmetrical EtherLoop circuit from NuVox Communications. The main si...
