I just got a notebook from my workplace so that i can log on from my home using Cisco-VPN. But i am finding this difficult to connect to internet let alone connecting through VPN.
Any guid...
When I have just one tunnel, why would ASDM show 3 IPSEC Tunnels and just one ISAKMP Tunnel? Just curious... Thank you. See image below.
I have used the ASDM to configure Remote VPN to an ASA5505, the connection works fine, but I need the client to have split tunnel to continue to have internet access when connected and I need ...
I have a Sonicwall VPN client connected thru an ASA 5520 across the internet and terminating on a Sonicwall Firewall (VPN Server). I have no internet access thru the VPN so I need to enable ...
Hi all - could you please help me with the following scenario please. I have a Hyper-V system running Server 2003 with ISA installed. It has 1 NIC with the following configuration;
IP: 10.0...
I am trying to set up a straightforward Server 2003 VPN connection from a remote user in Holland to the office in the UK.
The user has a Thomson TG787 router provided by the Dutch ISP. The ...
I setup a vpn on my 2821 router but I'm having trouble getting it to work. It connects ok with Radius authentication but I can not ping addresses on the inside network.
The client is g...
I am running routerboardOS 4.1 on a Mikro-Tik 450g router board. I am attempting to configure the vpn using openvpn. I have tried to follow a number of docs on this, but I either have somethin...
Dear Experts,
We want to configure site to site VPN between our company and customers network. But we found that customer is using same private ip in his internal network as ours. Thus our in...
Hi,
i want to buy a router for my new connection, and i want to choose a good one, could you help with it?
These are my priorities:
It needs to provide load balancig - I have 2 internet c...
Hello Experts -
I have a small local network that has numerous IP devices and I need more addresses. Currently, we're using a 192.168.4.x/24 subnet but would like to also use 192.168.5.x/2...
We are a training provider providing NVQ Qualf for construction workers.
Our business model is that we have assessors working in the field (8-10 currently).
The assessors use a specific tr...
If you use the windows vista qos settings and also use the cisco vpn client, does the vpn client disregard the qos markings?
Good day everyone,
I have a tough question to ask...
A client of mine has a large (250+ users) network. They have 4 servers, and a Hardware based firewall (Running Server 2003 with ISA2006...
I configure my CISCO PIX 501 version 6.3. We have 3 offices I created a vpn tunnel between 2 of my offices both using CISCO PIX 501 VER.6.3 I have no problems but I configure my users on my ...
We have 3 locations (CORP,COLO1,COLO2). At CORP location we have a SonicWall 4410 Pro appliance. At other locations we have Cisco ASA 5510's. I am trying to set up a site to site tunnel betwee...
Hello,
I have been trying to configure PPTP/L2TP on MAC - I donot want to use built-in MAC VPN support for some reason. I need to use TunnelBLick as VPN client. Since tunnelblick.net provid...
I have a VPN tunnel between two PIX 501's that is no longer is connecting as of this AM, nothing has changed, no power outages, Internet working perfectly. When I run the cmd sh isakmp sa I ...
From our BranchOffice1 ASA (192.168.100.1) we can successfully ping our MainSite ASA (192.168.1.1), but we are unable to ping our server (192.168.1.200). Below is the output of the ping comman...
I have 3 sites that are connected by site to site vpn's using cisco appliances (asa or pix). One of the sites has had an IP change from the ISP. I need to ensure tunnels come back up. Shoul...
I have an ASA 5505 (7.2) with a remote access VPN set up. I can connect just fin but not go anywhere. I've tried using DHCP and address pools but I'm a bit new to this so was wondering if anyo...
I have a user who works remotely, connecting to a Small Business Server 2003 network using the built-in Windows VPN. His laptop is on the domain and he normally connects to the VPN and can ac...
Hi All
I would like some help in designing a network scenario where 2 branch locations with POS systems and with 2-3 computers to each one will connect to a main office on a server running ...
Hello. I'm in the processes of trying to get a number of cisco ASA5505 devices up and running as hardware VPN boxes for my head office, and several branch offices. I'm trying to run them as ...
Hi,
could please somebody help me with configuring a Zywall 5 PPTP VPN, I want to create a VPN connection from my win XP to a Zywall 5 router (I have got a static IP). Could somebody write ...
