How do I stop a VPN connection (Windows XPsp2) from periodically trying to connect on it's own?
I recently added a new VPN connection (with the networking wizard) in order to access resour...
I have two new ASA 5520's.
Since hooking them up, my users can't establish VPN connections to other networks (they do this a lot) from behind the ASA's.
The vpn connections are PPTP.
...
The short version of this question is: Is there a way to set up a VPN firewall rule that does not NAT the clients IP address and instead just passes the client assigned IP address through?
...
Thanks to help I've received on these forums I was able to get a VPN running at my house. When users connect to this VPN they lose the rest of their internet. This is probably a feature of the...
I have 2 Cisco 1800 serives that I need to configure a DMVPN Fully Meshed. I have had no luck, can anyone help? I have included the running configuration File for Both Routers below. I thin...
Running Server 2003 with SBS, ISA server 2000 and Exchange Server
The Issue:
The VPN stopped working after windows updates, it was working perfectly fine before service pack 2 was install...
Hi everyone,
I'm, sure there is an easy solution to this but I can't figure it out.
Setup is:
Netgear FVX538v2 firewall.
Netgear ProSafe Client VPN software.
Authentication using RADI...
Hi
I am not sure what affects the speed of the VPN commection - but basically i want to make mine faster. We have an office in Delhi India, Sydney Australia plus we have agents that 'trav...
Hi Expert,
First of all let me admit that i m novice to this technololgy of VPN's & FW's so you may expect all types of silly doubts and questions from my end.
This is in regards to SITE...
I have 2 IP addresses running to my home.
One IP I have going to a PC/Router running server Windows Server 2008. (PC1)
The other IP I have going to another PC/Router running Windows Vist...
I have setup a router and an ASA5510 firewall. I have configured several Site to Site VPN's and they all work fine. I have also configured a Remote access VPN. The clients can authenticate how...
Hi Experts!
'I think' I need to change my LAN subnet (perhaps at least the last 2 octets of the LAN IP ex: 192.168.x.x).
As i understand, my LAN subnet should be different from the LAN s...
Here's the situation. I have two networks connected by VPN routers, 192.168.0.x and 192.168.2.x. On the 2.x network I have a Windows 2008 server configured with RRAS for use by VPN clients. Th...
HI,
Our main office is here in NYC and we have a branch office in LA. We have a 1.5 MBps SDSL connection in NYC. We have a 1000-1200 KBPS SDSL connection in LA.
I want to get a bette...
I am going to China this summer. I'd like a cheap VPN that gives me complete encryption for all web browsing. What is an inexpensive VPN service that I can install for a few months?
Also, w...
I have created numerous remote databases. When I originally put them on the remote computers they synced ok. Now when they sync through the VPN the master database on the server gets the inf...
I have a Cisco 851w setup to allow vpn connections using EASYVPN Server running on the 851w. Is there a method to allow the remote user, once connected to the VPN, access to the internet but n...
We have a cisco pix 501 and use the client vpn feature, not site to site. I set up each laptop at the main office on the lan and put them onto the domain, then ship there pc to them. Each re...
We have a customer with three phyiscally separate sites on 3 different subnets.
At the minute if someone vpn's in to the main site they have no access to the other sites through the vpn.(secu...
Hello experts,
I am baffled with some VPN problems. The permissions set on the office LAN are not used when I connect over a PPTP VPN(this is a workgroup setup).
This is a client to site...
We have recently setup SSL VPN with Secure Desktop, Advanced Endpoint Assessment, and using the Cisco AnyConnect VPN Client. While connected with the client we are not able to access the inte...
How to manage EZVPN remote clients -
I have one 2821 as an Easy VPN server and eight 871s as VPN Remote Clients. I have chosen to implement Client mode instead of Network Extension(or Netwo...
Hi there,
I'll set a little background first, to help explain the issue; we have a main office in the UK and a satellite office in Australia. The UK office operates on an AD-managed netwo...
The WAN Miniport (PPTP) connects and authenicates without error to the 2003 SBS from the XPP client. Both the server and client are fully updated. I can see the connection moving bytes in th...
I have installed th Cisco VPN Client on a Windows Vista Ultimate Laptop with Zone Alarm as this was needed to get Cisco VPN Client to run.
I can now connect to the Remote Network however when...
