July 24, 2008 02:20pm pdt

1. RobWill 299,672
2. batry_boy 233,234
3. lrmoore 135,928
4. arnold 115,903
5. mwecom... 65,324
6. dpk_wal 61,145
7. mkielar 42,800
8. ebjers 41,050
9. MrHusy 39,470
10. Voltz-dk 32,970
11. Cyclops3... 32,340
12. TechSoEasy 28,114
13. keith_ala... 27,046
14. trinak96 26,165
15. Qlemo 23,933

1. RobWill 1,452,565
2. lrmoore 936,671
3. batry_boy 407,944
4. grblades 214,434
5. rsivanandan 145,141
6. arnold 117,903
7. dpk_wal 114,145
8. calvinetter 112,055
9. TechSoEasy 101,193
10. mwecom... 83,124
11. keith_ala... 81,885
12. tim_holman 75,964
13. MrHusy 72,744
14. ewtaylor 68,324
15. Cyclops3... 68,285

08.07.2007 at 07:09AM PDT, ID: 22746567

	[x] Attachment Details

[x]

The Solution Rating System

With so many solutions, how can you tell which solutions are most likely to help you and which ones are not? To provide you with a tool to use, we rate our solutions based on various elements that most accurately determine if a solution is a quality solution. To explain what factors affect the solution rating, here are the elements we take into consideration when formulating our solution rating.

The Grade of the Solution
The Zone Rank of the Expert Providing the Solution
The Number of Author and Expert Comments
The Number of Experts Contributing
The Feedback of the Community

Your Input Matters
Because of the way the system is set up, the most important variable in this equation is you. As a member of Experts Exchange, you are able to cast your vote on the quality of the solutions in regard to how complete, accurate, helpful and easy to understand each solution is. When you provide your feedback, each rating is adjusted accordingly. So, if you see a solution that has a poor rating that you think is a good solution, let us know by rating it. As you do, the rating will be adjusted and will become more accurate for other members of our site.

If you have any suggestions that you would like to make for our rating system, please ask a question in the Suggestions Zone of Community Support.

Thank you!

7.0

How to configure static routes to other end of VPN tunnel

Zones: Virtual Private Networking (VPN), Network Routers, Miscellaneous Networking

Tags: vpn, static, route, tunnel

We have 4 locations that are linked with Linksys RV042 routers using VPN tunnels between locations. These work OK but we are having trouble routing to certain subnets. The layout is:
Branch 1: Cisco router (10.61.124.1) to data services provider (10.46.0.0 and 10.46.240.0 traffic), Linksys RV042 router(10.61.124.2) to ISP for Branch 1 internet access, and VPNs to Branches 2,3,4. Static routes Branch 1: 1.Cisco router to turn away all traffic NOT 10.46.0.0 255.255.252.0 and 10.46.240.0 255.255.255.128 and 2. RV042 to route traffic 10.46.0.0 and 10.46.240.0 to the Cisco router.

Branch 2: RV042 to ISP for internet access for Branch2, VPN to Branch 1and Branch 3
Branch 3: RV042 to ISP for internet access for Branch 3, VPN to Branch 1 and Branch 2
Branch 4: RV042 to ISP for internet access for Branch4, VPN to Branch 1. Router IP addr 10.58.91.242

Here is our problem. We need Branch 4 to route 10.46.0.0 and 10.46.240.0 traffic back to the Cisco router in Branch 1.
We tried adding a Static Route (destination: 10.46.240.0, netmask: 255.255.255.128 gateway: 10.61.124.1) to the Branch 4 routing table, but it doesn't work. A similar static route was attempted to be added to the Windows 2000 workstation at Branch 4 and this produced an error mesage: "The route addition failed: Either the interface index is wrong or the gateway does not lie on the same network as the interface. Check the IP Address Table for the machine."
How can we get 10.46.0.0 and 10.46.240.0 traffic from Branch 4 to Branch 1 Cisco router and not screw up the VPNs or internet acces for Branch 4?
Thanks in advance.

Start your free trial to view this solution

Question Stats

Zone: Software

Question Asked By: KiloMileage

Solution Provided By: KiloMileage

Participating Experts: 2

Solution Grade: A

Translate:

Loading Advertisement...

20080236-EE-VQP-29 / EE_QW_2_20070628