August 30, 2008 12:10am pdt

Member Login

Hall of Fame

Yearly

1RobWill 348,183
2batry_boy 236,734
3lrmoore 165,453
4arnold 118,053
5dpk_wal 72,695
6mwecom... 67,324
7ebjers 44,300
8MrHusy 43,020
9mkielar 42,800
10Qlemo 39,883
11Voltz-dk 35,470
12Cyclops3... 34,840
13TechSoEasy 33,389
14tigermatt 31,325
15keith_ala... 27,046
16trinak96 26,315
17JFrederic... 21,480
18from_exp 21,275
19stuknhaw... 20,075
20rsivanandan 19,950
21rowansmith 19,875
22PeteLong 19,175
23johnb6767 19,122
242PiFL 18,725
25RPPreacher 17,950

	[x] Attachment Details

How do i route traffic from the IP of the remote-access client to the network behind the VPN appliance?

Zones: Virtual Private Networking (VPN), Networking Hardware Firewalls, IPSec Security Protocol

Tags: Remote-access VPN, cisco, 5.0.01.0600, at home, behind a firewall, VPN Appliance, Cisco, ASA 5505, at work, externally accessable IP

Ok guys, I can do this with OpenVPN, but this IPSec VPN is giving me a headache - i have a VPN client installed on my laptop, a public addressable IP of a.a.a.a, and i am connecting to a Cisco ASA 5505 with a public addressable IP of a.a.a.b - both of these devices plug into a 4 port business cable modem (which means the 4 ports are bridged to the cable interface, anything plugged into it is publicly addressable), i have a static range of a.a.a.a through a.a.a.f to use on this cable modem. With the given configs, i am able to access stuff on the internal network on the ASA... but as soon as i move the ASA to the T1, NAT-T breaks down?
I can still connect to the ASA 5505 and login, but i can't pass traffic - i can still ping the internal ip of the device 10.0.0.1, but the ping reply comes back as a.a.a.a ? please help, i know this question isn't as direct as possible, but i need to "route" using the ASA to pass traffic between the internal network and any firewalled Remote-access VPN client.

         
           
             1:
2:
3:
4:
5:
6:
7:
8:
9:
10:
11:
12:
13:
14:
15:
16:
17:
18:
19:
20:
21:
22:
23:
24:
25:
26:
27:
28:
29:
30:
31:
32:
33:
34:
35:
36:
37:
38:
39:
40:
41:
42:
43:
44:
45:
46:
47:
48:
49:
50:
51:
52:
53:
54:
55:
56:
57:
58:
59:
60:
61:
62:
63:
64:
65:
66:
67:
68:
69:
70:
71:
72:
73:
74:
75:
76:
77:
78:
79:
80:
81:
82:
83:
84:
85:
86:
87:
88:
89:
90:
91:
92:
93:
94:
95:
96:
97:
98:
99:
100:
101:
102:
103:
104:
105:
106:
107:
108:
109:
110:
111:
112:
113:
114:
115:
116:
117:
118:
119:
120:
121:
122:
123:
124:
125:
126:
127:
128:
129:
130:
131:
132:
133:
134:
135:
136:
137:
138:
139:
140:

           
           
             : Saved
:
ASA Version 7.2(3) 
!
hostname ciscoasa
domain-name default.domain.invalid
enable password LQNXB/rR5/y/9A.P encrypted
names
!
interface Vlan1
 nameif inside
 security-level 100
 ip address 10.0.1.1 255.255.255.0 
!
interface Vlan2
 nameif outside
 security-level 0
 ip address *.*.*.* 255.255.255.224 
!
interface Ethernet0/0
 switchport access vlan 2
!
interface Ethernet0/1
!
interface Ethernet0/2
!
interface Ethernet0/3
!
interface Ethernet0/4
!
interface Ethernet0/5
!
interface Ethernet0/6
!
interface Ethernet0/7
!
passwd 2KFQnbNIdI.2KYOU encrypted
ftp mode passive
dns domain-lookup outside
dns server-group DefaultDNS
 name-server 66.75.160.15
 name-server 66.75.160.16
 domain-name default.domain.invalid
access-list 3rdRockGaming_splitTunnelAcl standard permit 10.0.2.0 255.255.255.0 
access-list 3rdRockGaming_splitTunnelAcl standard permit 10.0.1.0 255.255.255.0 
access-list testgroup_splitTunnelAcl standard permit any 
access-list inside_nat0_outbound extended permit ip any 10.0.2.0 255.255.255.192 
pager lines 24
logging enable
logging asdm informational
mtu inside 1500
mtu outside 1500
ip local pool testpool 10.0.2.2-10.0.2.33 mask 255.255.255.0
icmp unreachable rate-limit 1 burst-size 1
asdm image disk0:/asdm-523.bin
no asdm history enable
arp timeout 14400
global (outside) 1 interface
nat (inside) 0 access-list inside_nat0_outbound
nat (inside) 1 0.0.0.0 0.0.0.0
route outside 0.0.0.0 0.0.0.0 *.*.*.* 30
timeout xlate 3:00:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout uauth 0:05:00 absolute
http server enable
http 10.0.1.0 255.255.255.0 inside
http 0.0.0.0 0.0.0.0 outside
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart
crypto ipsec transform-set ESP-3DES-SHA esp-3des esp-sha-hmac 
crypto dynamic-map outside_dyn_map 20 set pfs 
crypto dynamic-map outside_dyn_map 20 set transform-set ESP-3DES-SHA
crypto map outside_map 65535 ipsec-isakmp dynamic outside_dyn_map
crypto map outside_map interface outside
crypto isakmp enable outside
crypto isakmp policy 10
 authentication pre-share
 encryption 3des
 hash sha
 group 2
 lifetime 86400
client-update enable
telnet timeout 5
ssh 0.0.0.0 0.0.0.0 outside
ssh timeout 5
console timeout 0
dhcpd auto_config outside
!
dhcpd address 10.0.1.2-10.0.1.33 inside
dhcpd dns 66.75.160.15 66.75.160.16 interface inside
dhcpd enable inside
!
 
!
class-map inspection_default
 match default-inspection-traffic
!
!
policy-map type inspect dns preset_dns_map
 parameters
  message-length maximum 512
policy-map global_policy
 class inspection_default
  inspect dns preset_dns_map 
  inspect ftp 
  inspect h323 h225 
  inspect h323 ras 
  inspect rsh 
  inspect rtsp 
  inspect esmtp 
  inspect sqlnet 
  inspect skinny 
  inspect sunrpc 
  inspect xdmcp 
  inspect sip 
  inspect netbios 
  inspect tftp 
!
service-policy global_policy global
group-policy testgroup internal
group-policy testgroup attributes
 vpn-tunnel-protocol IPSec 
 split-tunnel-policy tunnelspecified
 split-tunnel-network-list value testgroup_splitTunnelAcl
username testuser password H71CX14jHcYCmb5d encrypted privilege 0
username testuser attributes
 vpn-group-policy testgroup
tunnel-group testgroup type ipsec-ra
tunnel-group testgroup general-attributes
 address-pool testpool
 default-group-policy testgroup
tunnel-group testgroup ipsec-attributes
 pre-shared-key *
prompt hostname context 
: end
asdm image disk0:/asdm-523.bin
no asdm history enable

           
         

Start your free trial to view this solution

[x]

The Solution Rating System

With so many solutions, how can you tell which solutions are most likely to help you and which ones are not? To provide you with a tool to use, we rate our solutions based on various elements that most accurately determine if a solution is a quality solution. To explain what factors affect the solution rating, here are the elements we take into consideration when formulating our solution rating.

The Grade of the Solution
The Zone Rank of the Expert Providing the Solution
The Number of Author and Expert Comments
The Number of Experts Contributing
The Feedback of the Community

Your Input Matters
Because of the way the system is set up, the most important variable in this equation is you. As a member of Experts Exchange, you are able to cast your vote on the quality of the solutions in regard to how complete, accurate, helpful and easy to understand each solution is. When you provide your feedback, each rating is adjusted accordingly. So, if you see a solution that has a poor rating that you think is a good solution, let us know by rating it. As you do, the rating will be adjusted and will become more accurate for other members of our site.

If you have any suggestions that you would like to make for our rating system, please ask a question in the Suggestions Zone of Community Support.

Thank you!

8.3

Question Stats

Zone: Software

Question Asked By: fibrewire

Solution Provided By: arnold

Participating Experts: 1

Solution Grade: A

Translate:

Loading Advertisement...

20080723-EE-VQP-34 / EE_QW_2_20070628