Advertisement

05.28.2008 at 06:32AM PDT, ID: 23437949
[x]
Attachment Details

IPSec VPN

Asked by whbaxter in Virtual Private Networking (VPN), IPSec Security Protocol, Cisco PIX Firewall

Tags: , , ,

Trying to setup new ASA box for IPSec VPN. I receive this error message in ASDM when a VPN client tries to connect.  

Group = DefaultRAGroup, IP = x.x.x.x, Error: Unable to remove PeerTblEntry
Group = DefaultRAGroup, IP = x.x.x.x, Removing peer from peer table failed, no match!

For the client config, what should i have in the name and password field for group authentication? I think this is where my proglem lies.

Thanks, BillStart Free Trial 
1:
2:
3:
4:
5:
6:
7:
8:
9:
10:
11:
12:
13:
14:
15:
16:
17:
18:
19:
20:
21:
22:
23:
24:
25:
26:
27:
28:
29:
30:
31:
32:
33:
34:
35:
36:
37:
38:
39:
40:
41:
42:
43:
44:
45:
46:
47:
48:
49:
50:
51:
52:
53:
54:
55:
56:
57:
58:
59:
60:
61:
62:
63:
64:
65:
66:
67:
68:
69:
70:
71:
72:
73:
74:
75:
76:
77:
78:
79:
80:
81:
82:
83:
84:
85:
86:
87:
88:
89:
90:
91:
92:
93:
94:
95:
96:
97:
98:
99:
100:
101:
102:
103:
104:
105:
106:
107:
108:
109:
110:
111:
112:
113:
114:
115:
116:
117:
118:
119:
120:
121:
122:
123:
124:
125:
126:
127:
128:
129:
130:
131:
132:
133:
134:
135:
136:
137:
138:
139:
140:

: Saved
:
ASA Version 7.2(3) 
!
hostname ASA5505
domain-name .com
enable password 8Ry2YjIyt7RRXU24 encrypted
names
!
interface Vlan1
 nameif inside
 security-level 100
 ip address 192.168.1.1 255.255.255.0 
!
interface Vlan2
 nameif outside
 security-level 0
 ip address x.x.x.x 255.255.255.0 
!
interface Ethernet0/0
 switchport access vlan 2
!
interface Ethernet0/1
!
interface Ethernet0/2
 shutdown
!
interface Ethernet0/3
 shutdown
!
interface Ethernet0/4
 shutdown
!
interface Ethernet0/5
 shutdown
!
interface Ethernet0/6
 shutdown
!
interface Ethernet0/7
 shutdown
!
passwd 2KFQnbNIdI.2KYOU encrypted
ftp mode passive
clock timezone EST -5
clock summer-time EDT recurring
dns server-group DefaultDNS
 domain-name .com
access-list VPNTunnel_splitTunnelAcl standard permit 192.168.1.0 255.255.255.0 
access-list inside_nat0_outbound extended permit ip 192.168.1.0 255.255.255.0 192.168.1.224 255.255.255.224 
pager lines 24
logging enable
logging asdm informational
mtu inside 1500
mtu outside 1500
ip local pool VPNPool 192.168.1.231-192.168.1.250 mask 255.255.255.0
no failover
monitor-interface inside
monitor-interface outside
icmp unreachable rate-limit 1 burst-size 1
asdm image disk0:/asdm-523.bin
no asdm history enable
arp timeout 14400
global (outside) 1 interface
nat (inside) 0 access-list inside_nat0_outbound
nat (inside) 1 0.0.0.0 0.0.0.0
route outside 0.0.0.0 0.0.0.0 x.x.x.1 1
timeout xlate 3:00:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout uauth 0:05:00 absolute
http server enable
http 192.168.1.0 255.255.255.0 inside
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart
crypto ipsec transform-set ESP-3DES-SHA esp-3des esp-sha-hmac 
crypto dynamic-map outside_dyn_map 20 set pfs 
crypto dynamic-map outside_dyn_map 20 set transform-set ESP-3DES-SHA
crypto map outside_map 65535 ipsec-isakmp dynamic outside_dyn_map
crypto map outside_map interface outside
crypto isakmp enable outside
crypto isakmp policy 10
 authentication pre-share
 encryption 3des
 hash sha
 group 2
 lifetime 86400
telnet timeout 5
ssh timeout 5
console timeout 0
 
!
class-map inspection_default
 match default-inspection-traffic
!
!
policy-map type inspect dns preset_dns_map
 parameters
  message-length maximum 512
policy-map global_policy
 class inspection_default
  inspect dns preset_dns_map 
  inspect ftp 
  inspect h323 h225 
  inspect h323 ras 
  inspect rsh 
  inspect rtsp 
  inspect esmtp 
  inspect sqlnet 
  inspect skinny 
  inspect sunrpc 
  inspect xdmcp 
  inspect sip 
  inspect netbios 
  inspect tftp 
!
service-policy global_policy global
group-policy VPNTunnel internal
group-policy VPNTunnel attributes
 dns-server value 192.168.1.11
 vpn-tunnel-protocol IPSec 
 split-tunnel-policy tunnelspecified
 split-tunnel-network-list value VPNTunnel_splitTunnelAcl
 default-domain value .COM
username whb password eCtuA/0MCMYZ4AXN encrypted privilege 0
username whb attributes
 vpn-group-policy VPNTunnel
tunnel-group VPNTunnel type ipsec-ra
tunnel-group VPNTunnel general-attributes
 address-pool VPNPool
 default-group-policy VPNTunnel
tunnel-group VPNTunnel ipsec-attributes
 pre-shared-key *
prompt hostname context 
Cryptochecksum:e184a3b2360fcb3c199e8d7115a53705
: end
asdm image disk0:/asdm-523.bin
no asdm history enable
[+][-]05.28.2008 at 08:27AM PDT, ID: 21661299

At Experts Exchange, members can ask their questions to thousands of technology professionals, also known as Experts. Experts compete and collaborate to answer those questions by leaving comments like this one.

Start your 7-day free trial to view this Expert Comment or ask the Experts your question.

 
[+][-]05.28.2008 at 09:54AM PDT, ID: 21662110

Often, when Experts are collaborating with members who have asked questions, they will request additional information about the problem. Askers respond with an author comment like this one.

Start your 7-day free trial to view this Author Comment or ask the Experts your question.

 
[+][-]05.28.2008 at 10:10AM PDT, ID: 21662239

View this solution now by starting your 7-day free trial. Setting up your free trial is quick, easy, and secure. We will return you to this solution, unlocked, when you're done.

 

About this solution

Zones: Virtual Private Networking (VPN), IPSec Security Protocol, Cisco PIX Firewall
Tags: Cisco, ASA, 5505, VPN setup
Sign Up Now!
Solution Provided By: whbaxter
Participating Experts: 1
Solution Grade: A
 
 
 
Loading Advertisement...
20080716-EE-VQP-32 / EE_QW_2_20070628