|
[x]
Posted via EE Mobile
|
||
Search, ask, and monitor your questions on the go with EE Mobile. Visit Experts Exchange from your mobile device and never be out of touch again. |
||
| Question |
|
[x]
Attachment Details
|
||
|
[x]
The Solution Rating System
|
||
With so many solutions, how can you tell which solutions are most likely to help you and which ones are not? To provide you with a tool to use, we rate our solutions based on various elements that most accurately determine if a solution is a quality solution. To explain what factors affect the solution rating, here are the elements we take into consideration when formulating our solution rating.
Your Input Matters If you have any suggestions that you would like to make for our rating system, please ask a question in the Suggestions Zone of Community Support. Thank you! |
||
1: 2: 3: 4: 5: 6: 7: 8: 9: 10: 11: 12: 13: 14: 15: 16: 17: 18: 19: 20: 21: 22: 23: 24: 25: 26: 27: 28: 29: 30: 31: 32: 33: 34: 35: 36: 37: 38: 39: 40: 41: 42: 43: 44: 45: 46: 47: 48: 49: 50: 51: 52: 53: 54: 55: 56: 57: 58: 59: 60: 61: 62: 63: 64: 65: 66: 67: 68: 69: 70: 71: 72: 73: 74: 75: 76: 77: 78: 79: 80: 81: 82: 83: 84: 85: 86: 87: 88: 89: 90: 91: 92: 93: 94: 95: 96: 97: 98: 99: 100: 101: 102: 103: 104: 105: 106: 107: 108: 109: 110: 111: 112: 113: 114: 115: 116: 117: 118: 119: 120: 121: 122: 123: 124: 125: 126: 127: 128: 129: 130: 131: 132: 133: 134: 135: 136: 137: 138: 139: 140: 141: 142: 143: 144: 145: 146: 147: 148: 149: 150: 151: 152: 153: 154: 155: 156: 157: 158: 159: 160: 161: 162: 163: 164: 165: 166: 167: 168: 169: 170: 171: 172: 173: 174: 175: 176: 177: 178: 179: 180: 181: 182: 183: 184: 185: 186: 187: 188: 189: 190: 191: 192: 193: 194: 195: 196: 197: 198: 199: 200: 201: 202: 203: 204: 205: 206: 207: 208: 209: 210: 211: 212: 213: 214: 215: 216: 217: |
ASA Version 7.2(4) ! hostname xxxxxx domain-name xxxxx enable password xxxxxxx encrypted passwd xxxxxxxx encrypted names ! interface Vlan1 nameif inside security-level 100 ip address 192.168.1.1 255.255.255.0 ! interface Vlan2 nameif outside security-level 0 ip address 173.xxx.xxx.xxx 255.255.255.252 ! interface Vlan3 no forward interface Vlan1 nameif dmz security-level 50 no ip address ! interface Ethernet0/0 switchport access vlan 2 ! interface Ethernet0/1 ! interface Ethernet0/2 ! interface Ethernet0/3 ! interface Ethernet0/4 ! interface Ethernet0/5 ! interface Ethernet0/6 ! interface Ethernet0/7 ! ftp mode passive dns server-group DefaultDNS domain-name xxxxxxx access-list ust_SplitTunnelACL standard permit 192.168.3.0 255.255.255.0 access-list inside_access_in extended permit udp any any access-list inside_access_in extended permit ip any any access-list inside_access_in extended permit tcp any any access-list outside2inside extended permit udp any interface outside eq netbios-ns access-list PNAT extended permit ip 192.168.1.0 255.255.255.0 host 173.xxx.xxx.xxx access-list PNAT extended permit ip 192.168.1.0 255.255.255.0 1.1.1.0 255.255.255.0 access-list VPN extended permit ip 192.168.3.0 255.255.255.0 host 173..xxx.xxx.xxx access-list VPN extended permit ip 192.168.3.0 255.255.255.0 1.1.1.0 255.255.255.0 pager lines 24 logging enable logging asdm informational mtu outside 1500 mtu inside 1500 mtu dmz 1500 ip local pool USTPool 192.168.3.2-192.168.3.12 mask 255.255.255.0 icmp unreachable rate-limit 1 burst-size 1 asdm image disk0:/asdm-524.bin no asdm history enable arp timeout 14400 global (outside) 1 interface nat (inside) 1 0.0.0.0 0.0.0.0 static (inside,outside) udp interface netbios-ns 192.168.1.1 netbios-ns netmask 255.255.255.255 static (inside,outside) 192.168.3.0 access-list PNAT access-group outside2inside in interface outside access-group inside_access_in in interface inside route outside 0.0.0.0 0.0.0.0 173.xxx.xxx.xxx 1 route inside 0.0.0.0 0.0.0.0 192.168.1.1 2 route inside 192.168.3.0 255.255.255.0 192.168.1.1 1 timeout xlate 3:00:00 timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02 timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00 timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00 timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute aaa authentication http console LOCAL aaa authentication ssh console LOCAL aaa authentication telnet console LOCAL http server enable http 0.0.0.0 0.0.0.0 outside http 192.168.1.0 255.255.255.0 inside no snmp-server location no snmp-server contact snmp-server enable traps snmp authentication linkup linkdown coldstart crypto ipsec transform-set USTT esp-3des esp-sha-hmac crypto ipsec transform-set set esp-3des esp-sha-hmac crypto dynamic-map ust 1 set transform-set USTT crypto dynamic-map ust 1 set reverse-route crypto dynamic-map ust 21 set pfs group1 crypto dynamic-map ust 21 set transform-set set crypto map ustmap 1 ipsec-isakmp dynamic ust crypto map ustmap interface outside crypto map VPN 10 match address VPN crypto isakmp enable outside crypto isakmp enable inside crypto isakmp policy 1 authentication pre-share encryption 3des hash sha group 2 lifetime 43200 crypto isakmp nat-traversal 20 telnet 0.0.0.0 0.0.0.0 outside telnet timeout 5 ssh 0.0.0.0 0.0.0.0 outside ssh timeout 5 console timeout 0 dhcpd auto_config outside ! dhcpd address 192.168.1.5-192.168.1.20 inside dhcpd dns 192.168.1.3 68.87.73.242 interface inside dhcpd domain ustservices.corp interface inside dhcpd enable inside ! group-policy DfltGrpPolicy attributes banner none wins-server none dns-server value 192.168.1.3 dhcp-network-scope none vpn-access-hours none vpn-simultaneous-logins 3 vpn-idle-timeout 30 vpn-session-timeout none vpn-filter none vpn-tunnel-protocol IPSec l2tp-ipsec webvpn password-storage disable ip-comp enable re-xauth enable group-lock value USTVPN pfs enable ipsec-udp enable ipsec-udp-port 10000 split-tunnel-policy tunnelspecified split-tunnel-network-list value ust_SplitTunnelACL default-domain value xxxxxx split-dns none intercept-dhcp 255.255.255.255 disable secure-unit-authentication disable user-authentication disable user-authentication-idle-timeout 30 ip-phone-bypass disable leap-bypass disable nem disable backup-servers keep-client-config msie-proxy server none msie-proxy method no-modify msie-proxy except-list none msie-proxy local-bypass disable nac disable nac-sq-period 300 nac-reval-period 36000 nac-default-acl none address-pools value USTPool smartcard-removal-disconnect enable client-firewall none client-access-rule none webvpn functions url-entry html-content-filter none homepage none keep-alive-ignore 4 http-comp gzip filter none url-list none customization value DfltCustomization port-forward none port-forward-name value Application Access sso-server none deny-message value Login was successful, but because certain criteria have not been met or due to some specific group policy, you do not have permission to use any of the VPN features. Contact your IT administrator for more information svc none svc keep-installer installed svc keepalive none svc rekey time none svc rekey method none svc dpd-interval client none svc dpd-interval gateway none svc compression deflate tunnel-group USTVPN type ipsec-ra tunnel-group USTVPN general-attributes address-pool USTPool tunnel-group USTVPN ipsec-attributes pre-shared-key * tunnel-group-map default-group USTVPN ! class-map inspection_default match default-inspection-traffic ! ! policy-map type inspect dns preset_dns_map parameters message-length maximum 512 policy-map global_policy class inspection_default inspect dns preset_dns_map inspect ftp inspect h323 h225 inspect h323 ras inspect rsh inspect rtsp inspect esmtp inspect sqlnet inspect skinny inspect sunrpc inspect xdmcp inspect sip inspect netbios inspect tftp ! service-policy global_policy global prompt hostname context Cryptochecksum:46d29bca29add8a2fa83b9fd3e582325 : end |
Advertisement
| Hall of Fame |