Lets discount NAT as the problem add the following
crypto isakmp nat-traversal 20
Then if theres still no joy start from scratch http://www.petenetlive.com
Hi Guys
I attached my config for Cisco ASA 5505 I did configure the Remote access vpn for users I am testing it at our office I need to ship it the client in 2 days. every time I try the vpn from another outside network I get error: secure vpn connection terminated by peer reason 433!
also on ASDAM realtime log: Group=WestaimGroup ip x.x.x.x error: Unable to remove PeerTbIEntery
Group=WestaimGroup ip x.x.x.x Removing peer from peer table failed no match
Any help please
This Question has been solved and asker verified All Experts Exchange premium technology solutions are available to subscription members.
Experts Exchange has been collecting answers to technology questions since 1996…3 million and counting! If you have a question, chances are we already have your answer.
If you can't find the exact answer you're looking for, ask our exclusive community of 50,000 experts. You’ll get a personalized answer from a trusted professional.
Thousands of free tech tips, tricks, how-to’s and tutorials are available in our peer reviewed articles section. See for yourself how smart our experts are, no login required.
Access the answers to your technology questions today.
30-day free trial. Register in 60 seconds.
Members of the expert community talk about why the experience at Experts Exchange is different than what you will find anywhere else.

Try it out and discover for yourself.
30-day free trial. Register in 60 seconds.
Join the community of experts here and help other tech pros by answering question in your area of expertise. You can earn FREE access to all Experts Exchange's premium features and resources.
Lets discount NAT as the problem add the following
crypto isakmp nat-traversal 20
Then if theres still no joy start from scratch http://www.petenetlive.com
Hi PeteLong:
I followed your instructions and started over what I did is reset to factory-default and reconfigured from scratch. the VPN is working I can connect but, I have one host connected to the local network with IP 172.17.66.30 I cannot ping it from the VPN client computer! my new config is here:
ASA Version 7.2(4)
!
hostname WESTAIM-ASA5505
domain-name
enab
passwd 2KFQnbNIdI.2KYOU encrypted
names
name 172.17.66.3 WESTAIMSBS description Westaim SBS Server
!
interface Vlan1
nameif inside
security-level 100
ip address 172.17.66.1 255.255.255.0
!
interface Vlan2
nameif outside
security-level 0
ip address dhcp
!
interface Ethernet0/0
switchport access vlan 2
!
interface Ethernet0/1
!
interface Ethernet0/2
!
interface Ethernet0/3
!
interface Ethernet0/4
!
interface Ethernet0/5
!
interface Ethernet0/6
!
interface Ethernet0/7
!
banner exec ##########################
b
b
banner exec #### UNAUTHORIZED ACCESS IS PROHIBITED ####
banner exec #### All Activity is being Logged. ####
banner exec ##########################
b
b
banner login ##########################
banner login ### You have been Authenticated ###
banner login ### You are responsible for all activity during this session ###
banner login ##########################
banner login ##########################
ftp mode passive
dns server-group DefaultDNS
domain-name default.domain.invalid
acce
access-list inside_access_in remark Allow Exchange server to send e-mail
access-list inside_access_in remark Allow DNS server to query DNS servers on the Internet
access-list inside_access_in extended permit tcp host WESTAIMSBS any eq smtp
access-list inside_access_in extended permit tcp host WESTAIMSBS eq smtp any
access-list inside_access_in extended permit udp host WESTAIMSBS any eq domain
access-list remotevpn_splitTunnelAcl standard permit 172.17.66.0 255.255.255.0
access-list inside_nat0_outbound extended permit ip 172.17.66.0 255.255.255.0 17 2.17.56.0 255.255.255.192
pager lines 24
logging enable
logging asdm informational
mtu inside 1500
mtu outside 1500
ip local pool reomtevpnpool 172.17.56.30-172.17.56.50 mask 255.255.255.0
icmp unreachable rate-limit 1 burst-size 1
asdm image disk0:/asdm-524.bin
no asdm history enable
arp timeout 14400
global (outside) 1 interface
nat (inside) 0 access-list inside_nat0_outbound
nat (inside) 1 0.0.0.0 0.0.0.0
route outside 0.0.0.0 0.0.0.0 205.206.116.1 1
timeout xlate 3:00:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
http server enable
http 172.17.66.0 255.255.255.0 inside
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart
crypto ipsec transform-set ESP-3DES-SHA esp-3des esp-sha-hmac
crypto dynamic-map outside_dyn_map 20 set transform-set ESP-3DES-SHA
crypto map outside_map 65535 ipsec-isakmp dynamic outside_dyn_map
crypto map outside_map interface outside
crypto isakmp enable outside
crypto isakmp policy 10
authentication pre-share
encryption 3des
hash sha
group 2
lifetime 86400
crypto isakmp nat-traversal 20
telnet timeout 5
ssh 172.17.66.0 255.255.255.255 inside
ssh 172.17.66.30 255.255.255.255 inside
ssh WESTAIMSBS 255.255.255.255 inside
ssh timeout 60
console timeout 0
dhcpd auto_config outside
!
dhcpd address 172.17.66.30-172.17.66.50 inside
dhcpd enable inside
!
ntp server WESTAIMSBS
group-policy remotevpn internal
group-policy remotevpn attributes
wins-server value 172.17.66.3
dns-server value 172.17.66.3
vpn-tunnel-protocol IPSec
split-tunnel-policy tunnelspecified
split-tunnel-network-list value remotevpn_splitTunnelAcl
default-domain value westaimc.local
username xxxxxxxxxx password xxxxxxxxx encrypted privilege 0
username westaim attributes
vpn-group-policy remotevpn
username xxxxxx password xxxxxxxxxxx encrypted
tunnel-group remotevpn type ipsec-ra
tunnel-group remotevpn general-attributes
address-pool reomtevpnpool
default-group-policy remotevpn
tunnel-group remotevpn ipsec-attributes
pre-shared-key *
!
class-map inspection_default
match default-inspection-traffic
!
!
policy-m
parameters
message-length maximum 512
policy-map global_policy
class inspection_default
inspect dns preset_dns_map
inspect ftp
inspect h323 h225
inspect h323 ras
inspect rsh
inspect rtsp
inspect esmtp
inspect sqlnet
inspect skinny
inspect sunrpc
inspect xdmcp
inspect sip
inspect netbios
inspect tftp
!
service-policy global_policy global
smtp-server 172.17.66.3
prompt hostname context
Cryptochecksum:1650
: end
WESTAIM-ASA5505#
Thanks PeteLong
Now it is working I just had to disable windows firewall on both machines, I can ping the remote and local computers. The full points are going toward you man you been very helpful! But I have more questions for you:
1- I need to configure Radius server to authenticate VPN users, I need to keep the local as well. So, the command lines for that please, my RADIUS server would be 172.17.66.4
2- I have SBS server 2008 on 172.17.66.3 I need to allow SMTP exchange server in and out, remote web workplace on SBS. Do I need to configure static NAT for that?
Thanks again
1- See my website here - http://www.petenetlive.com
2-
Not
Business Accounts
Answer for Membership
by: modathirPosted on 2009-07-03 at 21:29:52ID: 24775722
also Group=WestaimGroup user xxx ip x.x.x.x Cannot obtain IP address for remote peer