I have a new SBC DSL connection and a new Linksys WRV54G. My LAN is a SBS2003 with 5 clients and Exchange 2003.
I called my ISP SBC DSL and asked for a static public IP so I can creat a rel...
Hi Experts,
I have new Cisco ASA 5505 Version 7.2, and I tried the Site-to-site VPN Wizard to setup a tunnel with a Linksys Router but no luck. Please help me solve my problem.
Here's th...
Hi guys.
Im an IT consultant that works for firm that has about 25 clients. All the clients use windows VPN (RRAS) for their vpn connections. I looked around but couldnt find any way to c...
Howdy,
we just purchased and installed a D-Link DFL-210 hardware firewall VPN solution for a single SBS 2003 site. Our internet connection is a cable link with (unfortunaly) a non static IP...
I am looking at SSL VPN and would like to know what the expert recommend. I would like to replace the existing Cisco VPN 3000. The Cisco 3000 still work well for the XP users, but Vista x64 ...
Hello All-
I have some general vpn questions:
1. IS GRE (IP Type 47) used in an ipsec/l2tp vpn?
2. IS GRE a true tunnel or is it transport (On windows 2003 RRAS).
3. What is the dif...
I trying to connect to a smoothwall - VPN smoothtunnel via IPSEC, I'm using a netgear WNR834Bv2.
If I use a simple analogue dial up access to the net then connect to the VPN tunnel, everythin...
Hi Experts,
Let me take a minute to describe my network. I have two Windows 2003 servers, one is an Exchange 2003 server and the other is a Domain Controller. All computers on the network...
My problem is that I do have a VPN between 2 sites, A (Cisco) & B (Checkpoint) but I am having path too deep error messages and network resource no longer available messages. Site A can do ev...
I've been trying to connect to my company domain using CISCO VPN 5.0.02.0090. Apparently, the connection gets terminated with error 412 (I am using a Linksys gateway at home - the termination ...
We have 1 Domanin Controller, MS Server 2008 Standard. We need to set up VPN for remote users, but I don't see Routing and Remote access anywhere on this new platform. Am I missing something...
Hello there. My company is in the process of rolling out 20 or 30 Check Point UTM-1 Edge W Security Appliances to our remote job sites. They are all being configured to connect to our NGX R65 ...
Hello,
How all of you guys working remotely if you have a Windows Vista computer ?
I could not find a VPN client working on my laptop which Vista Business.
if any one has any solution...
I need to create a VPN tunnel between an Edge X20 and Linksys WRV54G. Had a previous VPN created between two WRV54G's, but need to upgrade the box for other reasons.
I'm trying to install Sonic Wall Global VPN Client version 4.0 and I keep getting this error message:
"It appears that you've uninstalled the SonicWall Global VPN client. You need to reboo...
Hi,
I have two Cisco 877's with a point-to-point VPN tunnel. Everything was working fine and it just dropped out all of a sudden. The two configrations are attached. Can anyone please help...
When a user tries to connect using Windows XP, he gets as far as registering computer on the network , then: TCP/IP CP reported error 733: A connection to the remote computer could not be co...
I'm trying to use the Cisco VPN Client to connect to two of my customers' networks. My own network uses a Netopia R9100 to connect to a Motorola Surfboard cable modem connected to Comcast's se...
Hi,
can someone help me to troubleshoot those errors? Cisco VPN client disconnection every 20-25 minutes. Here is a log from VPN client
Also everytime when I establish VPN session again my...
I have a remote user with a #1 NS5GT connected to a Verizon FIOS router (dynamic ip) with a VPN tunnel to another #2 NS5GT (static IP).
#1 NS5GT <--> FIOS Router <-->INTERNET<--> #2 NS5GT
...
I'm trying to setup a VPN between my home network and my office. I can remote desktop to (1) fine from (6), forwarding TCP 3389 in router (2) just fine.
-----------------------HOME---------...
Hello,
Im trying to set up an IPSec VPN tunnel between a PIX 515 and a Cisco 851 Router. I cant get the tunnel to work. Below is the VPN information from the router and PIX. Am I missing...
Greetings All,
I'm having an issue with what I thought would be a simple resolution, but I must be missing something. Please consider the following:
1. I have a new Netgear WPN824v2 Wire...
I've loaded Cisco VPN client on my Mac and have made sure the existing Internet Connect VPN is not enabled but I get an error message as shown below. I use an Airport Extreme router for the ga...
Hi Experts!
I just took a new position at work supporting our VPN client. Since I started 3 weeks ago, I have received multiple (more than 10) calls from people who are using VPN to connect t...
