I have a client who uses the Sonicwall Global VPN Client successfully everywhere except at t-mobile hotspots.
Using the latest Sonicwall Global VPN client connecting to a Sonicwall TZ190 ro...
Here's my setup:
Site 1 (Subnet 192.168.0.0/24) : Two DCs, Exchange 2003 on 1st DC. Only 1st DC is a GC.
Site 2 (Subnet 192.168.1.0/24 / Linked over Site to Site VPN): One DC (not a GC...
Error message on Exchange Server:
Mapi session "/o="sitename"/ou=First Administrative Group/cn=Recipients/cn=end.user" exceeded the maximum of 100 objects of type "session".
I have alrea...
I am using windows xp sp2 pro as a vpn server behind a linksys wrt54fg router behind a bellsouth dsl connection. What ports need to be opened and forward.
Hi guys..
I have Netscreen ns5xp firewall/vpn in the office with verizon business DSL static ip address.
I want to connect home to office using VPN.
could anyone give me step by step how ...
Ok guys, I can do this with OpenVPN, but this IPSec VPN is giving me a headache - i have a VPN client installed on my laptop, a public addressable IP of a.a.a.a, and i am connecting to a Cisco...
Hi Experts,
I have a remote user with Qwest DSL internet services. I've setup a vpn connection that utilizes a Netscreen 5gt on the office side and the Netscreen "Remote" software on his c...
I cannot even map by IP address. I DO have NetBIOS enabled on the remote device (a laptop running XP Pro). The tunnel is a manual IPSEC between two Firebox devices. I can ping across the tu...
I am trying to setup authentication/authorization for SSLVPN users on ASA firewall.
I know how to setup authentication/authorization server groups and tie that into group-policies or 'tunne...
Hi Experts
my users complain about unstable vpn connection. I logged on to router and looked at logs and see the following entries
Oct 22 19:11:21.938: %DUAL-5-NBRCHANGE: IP-EIGRP(0) 100:...
For some reason after reinstalling the Windows server (after a total array failure) the system will no longer allow incoming VPN connections due to failing to allow in GRE packets, from memory...
At my work we load a Netscreen Remote application on the laptops of our remote users so they can connect to our VPN tunnel to our network and access network resources. Just recently I built a...
Hello,
How all of you guys working remotely if you have a Windows Vista computer ?
I could not find a VPN client working on my laptop which Vista Business.
if any one has any solution...
I am using Windows Vista Business with Outlook 2007 and a Cisco VPN client to access my corporate Exchange Server. Everything worked fine until I went on travel last week and connected to a h...
I am using a Cisco IOS Router with Easy VPN Server configured. Recently, 1 particular user is unable to login to the VPN.
The error message is as below
"
Phase 1 SA deleted before Mode Conf...
Hi,
I have two locations connected by a router to router vpn connection between a zyxel prestige 600 series router (location1) and a zyxel zywall (location 2). This connection serves an i....
*****Warning Will Robinson, long and may cause thinking!*****
First the important part. I know I will get a lot of responses on this is why so many points, I full intended to split the poin...
I have set a number of SBS systems up and never had a VPN access problem before (but it is the first time Ive had to configure this particular ADSL/Router)
The problem is that I cannot mak...
I've been working on setting up a VPN for the laptop users at our company. The VPN works, except for 2 things:
1) Users need to be able to access the internet. I don't want to enable split-...
I have an "interesting" transient problem with my laptops VPN connection - sometimes the VPN connection works perfectly, and other times it just doesn't work at all.
The Cisco VPN client so...
I use Cisco 837 routers to connect to a Cisco VPN concentrator.
The cisco 837 has four switch/ethernet ports.
I would like to make one of the ports able to use the VPN tunnel, but the 3 rem...
Hi all,
Users are periodically loosing the IP address out of their connection entry. The Host IP address just disappears.
The error they get is: Error 5: No host name exists for this co...
Hi
I want to setup microsoft VPN client to allow users to connect to business network. I know I can use the buildt in cisco vpn client in the firewall, but this is very complex to me. Can a...
I would like to make my VPN more secure.
I am using Win 2003 server with 1 nic. My remote users vpn to this server, they qare then given a local IP address. they then connect to terminal se...
Hi!
I'm deploying a domain in a company, 30 users, many of them are connected through VPN.
I need them to join the domain, remotely.
I'm using a script to join the domain, after the vpn con...
