I have an ASA 5510 that I use to provide VPN access to my HQ network. The authentication for the VPN users is handled by an RSA SecurID appliance. Ever since we started using SecurID for aut...
I was able to setup my VPN server with some help off of this board. I am using a Linksys Router WRT54G. Right now I can connect if I use the public IP address just fine, but when I switch to...
I cannot complete the connection with the QuickVPN Client, it gets stuck at the "verifying network". The router shows on the VPN Summary that I am connected, but cannot ping the router lan ip ...
I am trying to unistall my current installation of the Cisco VPN Client so i can install a newer version but everytime i try i get the following error:
Error 28000: Before installing the C...
I just downloaded Cisco's VPN Client version 5.0.01.0600 for Vista 32 bit. I was able to connect but the connection was immediately terminated by the peer and I got reason 435: Firewall Polic...
How do I configure this app to talk to my firewall? When I launch it it says "no profile available" - I put in my SSL VPN gateway and hit connect and tries to connect for an extended period of...
Hi Experts,
This may be a slightly long winded question, but I want to make sure I include all the necessary info.
I am trying to set up a virtual LAN which is only accessible via a VPN ...
I have a CISCO ASA5505 set up for Remote Access VPN, both IPSEC and L2TP. I can access the device just fine using the CISCO VPN client but want to have the option to do so using a Windows clie...
Trying to get the anyconnect to work but if i put in the correct username and pass on the client it says AnyConnect is not enabled on the VPN server. But if i put in a wrong password it says l...
I am trying to connect a laptop with a 802.11b wifi card to a corporate VPN using the Nortel Contivity VPN client. The local wifi AP is a Netgear WGR614 v1 router (i.e. it's 802.11b compliant)...
Where to start.. I'm just going to write everything.. More is better, right? I'm the type of person to read, read, read.. try, try, try until I hit a wall. Well, the wall is here in front of m...
What is the most likely cause of an "error 414: Failed to establish a TCP connection" when using the Cisco VPN client version 4.0.3 ?
Hi
I am currently administrating a network in which we have a CIsco 1801 Router in place and somewere in the region of 30 remote users whom connect via a VPN session to HQ. The VPN has been...
We have around 20 HTC Touch Pro mobile phones trying to create a VPN to the main office server. The VPN connects ok, and we can ping the server ip address from the phone. The problem is as soo...
I have been running into problems with Cisco VPN client being install on DELL Latitude D530 laptops. I get an error in the middle of the installation " DNE Network install has encountered a pr...
Hi,
I have a Cisco ASA 5505 which I have configured for VPN access and I can create a VPN connection fine.
The problem comes when I am VPN'ed in, I cannot access the internet/outlook ema...
I have just had a T1 connection installed that uses a router and want to create a virtual private network from home to work. Earthlink says I have to tell them the port(s) that need to be turn...
I am trying to set up VPN connections for remote MacBook Pro users to our office's OS X server. The VPN configuration key created using the VPN tool in server preferences in a standard config...
Cisco VPN client 4.8 is installed on my WinXp SP2 gateway laptop. the application installs but when when trying to access it I receive a message stating. "Error 56: The Cisco Systems, Inc VPN...
I was trying to setup a VPN on RVS4000.
I configured a below VPN setting on RVS4000 but the status says it is down.
Can anyone tell me what is wrong and how to configure correctly?
...
I am having problems configuring Windows 2003 server and Windows XP Pro SP2 client, to connect over VPN using EAP and L2TP
They are on the same LAN.
When connecting from client after about...
Hello Expert
Recently, I have implemented WebVPN using Cisco ASA 5510. Currently, the WebVPN I configured is for accessing one Terminal Server. So branch user or Sales staff able to access ...
I just got my friend's VPN connection dropped. He tried to upload some files for me. First, it seemed the connection was terminated around 5 minutes, and from the last tryout I logged the foll...
I have a Cisco AnyConnect VPN Client that autenticate the user but after a while it raise a "Unable to establish VPN". I'm able to connect to the same asa 5505 through webvpn anyconnect link.
Scenario:
The office has a network with private IP:s ranging from 192.168.0.1 (the FVS318 router) to 192.168.0.255. The router has been set up for VPN according to instructions from Netgear d...
