What is the most likely cause of an "error 414: Failed to establish a TCP connection" when using the Cisco VPN client version 4.0.3 ?
I setup the Cisco ASA 5505 with the VPN wizard and while it connects from the outside it causes the clients to loose DNS and will not allow them to connect to the server or drive shares. Here ...
Hi,
I have a RRAS server configured on Windows Server 2003, I have users connect in via VPN and the system issues them a 192.168.1.x address. What I need to do is add a route each time the...
dear all,
i have PIX ASA cisco and i configured with VPN connection between IT office and other office in other country and working fine i mean i can ping from my lan to remote lan with diffe...
We have one user who has a Blackberry device that allows him to plug in his PC and access the internet.
Our laprop users also have the ability to open up a VPN connection to our network... ...
I have installed CISCO VPN on the laptop to access servers at client site. All my other colleagues are able to connect fine to the servers. But, when I logon to the VPN, the VPN connects, but ...
When logging into my domain at work with a SBS2003 it says "verifiying username and password" then gives error 721. ports TCP 1723 and IP 47 are directed at the server with my Linksys router t...
I have a site to site VPN tunnel setup between an ASA5505 and SonicWall Pro 4060.
The tunnel won't setup and I am getting an odd set of errors (different from the ones I am used to).
This i...
Can I use Linux as VPN server for Windows clients? The VPN would operate over the internet. If so which version of Linux is best?
I have a remote user with a #1 NS5GT connected to a Verizon FIOS router (dynamic ip) with a VPN tunnel to another #2 NS5GT (static IP).
#1 NS5GT <--> FIOS Router <-->INTERNET<--> #2 NS5GT
...
I'm running Vista Ultimate RTM and I'm trying to VPN into a 2003 enviroment. Thos works great on an XP box that is on the same network as my vista box. I have tried this with the firewall off ...
Hello,
I have an older model pc, p3-1000mhz using win 98 se, that's hooked to a cable modem. I was able to install nortel network's vpn software without a probllem. As soon as I try to dial...
Hi,
I currently have a netscreen 5xt setup with an Autokey IKE VPN. One user has a mac os 10 pc and wants to connect to the vpn.
There are no entries in the L2TP category - do I have ...
I am working on getting a PIX515 to connect to a Netscreen 5GT
In my lab I have a PIX 501 running 6.3(4). I can connect to my 5GT without any problems
When I do a get sa from the Netscr...
Hi,
I am troubleshooting a VPN Tunnel that was working between a Cisco ASA and a Cisco Router.
Attached is the log from the ASA
What does this mean?
I know my PSK is correct.
Th...
On Workstation 2, I can run the VPN client and establish the VPN connection, but iI cannot ping the local ip of server A or connect using Remote Desktop.
On another office (office 1) the same...
I tried to connecting vpn but...
notification
Initializing the connection using certificate "egarcomputers"
Initiating TCP to xxx.xxx.xx.xx...
Contacting the security gateway at xxx.xx...
I have a Cisco AnyConnect VPN Client that autenticate the user but after a while it raise a "Unable to establish VPN". I'm able to connect to the same asa 5505 through webvpn anyconnect link.
I have a Vista home premimum laptop that is not connecting to my XP Pro based VPN the way I need it to.
when connected, the vista machine cannot open a shared folder on the host machine using...
The following is our current network infrastructure:
Client PCs > SBS 2003 DC (with DHCP & 2 NICs - one internal on 10.xxx.xxx.xxx and one external to the SonicWall on 192.xxx.xxx.xxx) > Soni...
I have installed a RSV4000 router at my office and I am trying to connect to it from my home using the QuickVPN client.
I have updated the firmware on the router to the latest and download...
We've got an urgent problem. We've got two sites, each with a T1 to the internet. The main site has about 200 network devices hooked up to it, multiple subnets, wireless bridges linking some...
We have a Pix 501 setup and we can access our local lan and the internet. We have split tunneling setup. It appears to work fine from a dial up connection where you have a public IP assigned...
I have a Cisco VPN adapter that disables in Device Manager after Windows Restarts....any Suggestions on this issue
Hello,
I have 2 cisco asa 5505 with ios 7.2(3) and asdm 5.2
I have configured the 2 cisco to set up a site to site vpn, but when I try to start the vpn I have this error message:
[code]7130...
