I have a VPN tunnel between an ASA 5520 and a 5505.
The 5505 is at a customer site and the 5520 is ours. The customer would like to deploy some equipment at our site and they are very speci...
Hi,
We want to have 2 people connecting with Windows VPN client (from the same remote small network) into the same Windows server (main office) - but it seems to knock 1 connection off when...
Hi,
I looking at setting up a remote server at my home as a backup in case my servers in my office fail. What is the procedure in doing this? My office has SDSL with static IP addresses a...
when using RDP from client to remote into a server, what ports and services must be open on the server to allow the remote session to be established with server?
thank you
I have a routing and remote access server. We use it for a PPTP VPN connection. I would like to be able to have an IP reservation set aside when a particular user signs in.
Reason for this ...
Hello,
Please look at the following diagram. We have a VPN setup to the 193.168.0.1 box using that VPN we are able to access 193.168.0.87, 193.168.0.88 and other machines on the 193.x.x.x...
I have just put on 5 Telstra highspeed ADSL connections in remote locations and i need to prepare my self before i fly to each site to configure these connections to work with our current VPN ...
We are using SonicWall Firewall Pro 2040 and SonicWall SSL-VPN 2000 devices. The system should be setup so that users can connect to an exchange sever and access their files. Currently when...
One of the school that i'm responsible (it-wise) for, has 2 campusses about 10 kilometers from each other.
Situation:
- Campus 1 : 1 server (MS Server 2003) and about 160 pc's, fortigate 2...
We have an office in the US with an ASA 5510 Satic ip, pretty much cut and dry. What I am trying to do is place an ASA 5505 into an exsisting network in germay to allow them to VPN into our US...
i have a user that connects to the office with vpn, but when he tries to print to his printer at home it will not work the printer is a ip printer
I have a User that is remote and connects in via VPN. He and his wife both do. We recently had an issue with his laptop and he went to another laptop until all could be fixed. The laptop had w...
Hello, I hope someone can help. I have a VPN configured between two sites. The VPN drops after one hour. It can be re-connted on either end by re-activating the VPN... and then it will disconn...
Hi There,
We have a global VPN setup on our FW and it allows our mobile users to connect to our network. The user connect via the GVPN software supplied by sonicwall. This send a request ...
Hello,
I am experiencing a problem with a Sonicwall Pro 1260 with the Enhanced operating system. I have spent lots of time with Sonicwall support with no resolution other then them blaming ...
Is there some way to modify the CISCO VPN Client install file, so that it includes the Group Name, Pre Shared Key and IP address of the VPN Concentrator, so it can be distributed to staff with...
I have a Windows 2000 Server running RRAS. We have many users connection through this. I have about 8 users in a remote facility that need to use this also. My question is, can i restrict this...
Hi there,
I am trying to set up a simple VPN connection for a number of remote users who currently access a terminal services server via RDP.
I would like to provide a more secure method...
I'm trying to setup a site-to-site connection to an established system from another established system. The system I am on has all its hosts on a 192.168.1.XXX subnet.
The system I am tryi...
I use an Astaro 220 as a firewall and VPN device. Remote users use the standard Microsoft XP VPN client to connect. It works very well from everyone's home. However, when some users go on t...
I just set up QuickVPN->wrv54g linksys and it works fine on one machine.
But on the 2nd machine I set it up on I the client stops at last window before connecting - the "Verifying Network" wi...
I use Cisco VPN Client 4.0.2 (A) to connect to my office network from home. It works fine when connecting from a PC running Win2K and a laptop running WinXP Pro, but not on a laptop running Wi...
Hello, I have a Pix 501 connected to a second Pix 501 with a pre-shared-key setup basic (config below).
I want to add a remote office with 2 IPs that are in the 192.168.1.x address space and ...
I do not know whether this belongs here as I am unable to a more suitable category.
Cut long story short. I'm now creating a new network which consists of maybe 7-8 clients + servers + nms,...
I have spent about 30 hours total on the phone with Linksys and with AT&T trying to figure this out and I am sure that someone has run accross it before.
I have an office in Cleveland that ...
